I recently purchased a new desktop computer and wanted to migrate my custom settings from my older laptop using the export utility. I successfully exported the zip file but when importing to the new computer, I get this message: "This file is not an AutoCad LT2012 - English Migration Package".
I have repeated the export to several different media (flash drive, cloud folders) with the same result when attempting to import the file.
I have a new computer with 2012 Autocad LT. My settings are from 2010 Autocad LT. I can only figure out how to import my settings if they are from my current system or migrate my settings if I have an old version of Autocad installed on my computer which I don't. How do I get my 2010 settings into my 2012 autocad LT on my new computer?
View 3 Replies View RelatedThe crashing is consistent every time I try this. Here is how I replicate the problem:
- Open a SheetSet.
- Right click on the sheetset and select Transmittal Setups.
- Click import.
- Select a template DST and click open.
- Check a setup and click import checked.
Civil 3D Locks and an error saying "AutoCAD Application has stopped working" pops up and whamo. I have custom eTransmit settings and here they are just in case,
[HKEY_CURRENT_USERSoftwareAutodeskAutoCADR19.0ACAD-B000:409ETransmitsetupsBack-Up]
"AEC_EXPLODE_DWG"=dword:00000000
"Name"="Back-Up"
"AEC_TEMP_SETUP"=dword:00000000
"AEC_INCLUDE_PROJ_INFO"=dword:00000000
[code]....
I have created a profile showing existing and finish grade. I can't seem to control the appearance of the existing grade line and the finish grade line individually. I need finish grade to be color 161 and existing grade to be color 252, but whatever I set as a color applies to both.
I have done this in the past with no trouble at all, but can't seem to get it to work now. I even tried importing settings from drawings with that display, but nothing has worked yet.
I am changing from AutoCAD 2011 to 2012. I created a custom tab in AutoCAD 2011 with custom panels that had all the buttons I use most often. Despite saving the workspace and the profile as I was told, it hasn't shown up in 2012.
How can I get my custom tab to show up in the 2012 ribbon, without recreating it from scratch?
I can't remember how to import a ctb file into my plot settings for a drawing?
View 9 Replies View RelatedI am trying to move to a new computer and when I try to export the settings from my old computer using the 'Export AutoCAD 2012 Settings' command I get the following:
An error occured during the xport process. Please try again.
ERROR: There was am error generating the XML file.
Environment:
Windows XP Pro SP3
MS Office 2007
AutoCAD 2012 (part of AutoCAD Revit Architecture Suite 2012)
Otherwise, I have no problems with AutoCAD. I cannot work without my own AutoCAD setup?
I'm working with some clients and I, myself, am rather new to AutoCAD. We are using AutoCAD LT 2010. I found, in this forum, how to export custom settings. We exported settings and then imported them on a new computer. All seemed well with one minor exception:
He mentioned that every thing exported as far as window settings go, but within each applet (I'm not sure what it's called when you replace the ribbon with drawing applets), some of the icons weren't in the location where he had it. He reported that his copy icon was in the location that his "Cut" icon was.
Is there a way to use the stretch command like this?First I select the object. type stretch, when i make my selection window the stretch points of only that object get selected and not of other polylines which are inside my selection box.
View 4 Replies View RelatedI'm importing custom iproperties from an excel document into inventor using the code I've written below. I've figured out how to bring up a dialog box to select the excel file I need, but I'm completely stumped when it comes to selecting the sheet within the file. As it is now, I'm specifying the sheet in the code itself (Str. C). My goal is after selecting the excel file from the dialog box, have ilogic list all the sheets within the excel file, then be able to select which sheet I need using a radio box, list box or some sort of prompted entry.
DimfdAsOpenFileDialog=NewOpenFileDialog()
DimstrFileNameAsStringfd.Title="Open File Dialog"fd.InitialDirectory="C:"
fd.Filter="All files (*.*)|*.*|All files (*.*)|*.*"
fd.FilterIndex=2
fd.RestoreDirectory=True
[code]....
In 2012, when I click on a viewport and try and to change the scale, in either quick properties or the properties window custom scale. AutoCAD only allows the standard scale settings, not a custom one. I think this is just a matter of some setting, but do not recall it.
View 5 Replies View RelatedHow can I migrate my custom settings from AutoCad LT 2008 to AutoCad LT 2012?
View 9 Replies View RelatedWe loaded up C3D 2013 a month or so ago. I exported my user profile (Options>Profiles>Export) from C3D 2012 and loaded it into 2013. Now the profile will not stay loaded. I have to reload it every time I startup C3D. It also doesn't hold my view cube settings or my panes.
View 4 Replies View RelatedWe are curently using ACAD2011.
I installed ACAD2012 but never got the Migrate custom settings box upon opening ACAD2012 for the 1st time.
I reviewed Autodesk Help that ensured me that I could also find it thru:
<start...Autodesk mech 2012Migrate custom settingsmigrate from a previous release>
Epic fail... all that showed up there was export and import autoCAD 2012 settings.
Where oh where could my migration tools box have gone? Why is it not there?
(FYI, this happened to us when we upgraded from 2010 to 2011 also but we thought we had done something wrong so we eventually just manually transferred files over. That was very time consuming and we do not want to perform that exercise again.)
I am upgrading to 2012 from 2008. Will all of my custom settings/ linetypes/ blocks, etc. automatically transfer over?
View 1 Replies View RelatedI built a new computer, Windows 8, 64 bit.
Installed Acad LT 2011 64 bit.
Did an export of custom settings from a Windows 7 64 bit LT 2011 installation, imported those to the new Windows 8 LT 2011 installation. This was done using the Start>Programs menu. (I ditched the "Metro" stuff.)
The setup looks mostly the same, but when I go to use it, the icons don't match the commands. I have toolbars down the left and right sides with many icons. The icon for Hatch runs the Polygon command. The Move icon runs the Offset command. Lots of them are screwed up.
The ribbon commands along the top seem to be OK.
When I try and load my cui file, my custom toolbars and settings do not show up?
View 9 Replies View RelatedI'm running LT 2014 at Win7 x64 and have a problem with Xerox WF 6604 custom size paper settings.
Simply say when I change custom printer size at the printer's driver settings and confirm all dialogs nothing happend and LT use default settings. No dialog about new or temporary PC3 appear so looks that ACAD doesnt know about change at the printer driver?
This problem isn't continual but, for example, I printed something from the same dwg twice, but when third one change was set the very problem will appear and ACAD doesn't register changes.
I have a JPG file that I've created in Lightroom from a RAW file.
My computer has crashed at some point, and I lost everything, but I managed to save the original RAW file.
Is it possible to recover the development settings from the JPG file, in order to re-edit the orignal RAW file (so I could make changes right from where I left off)?
do any camera setting (portrait , landscape,contrast,saturation,etc,) matter when importing raw.
View 2 Replies View RelatedI have a line path and I want to apply a brush stroke to it. I know how to do this and i was wondering if there is a way to apply a gradient colour to the stroke at the same time. it is a curved line so a gradient mask doesn't achieve what I need. i want the line to consistently change colour as you go along it even round curves.
View 5 Replies View RelatedI installed 2013 and went straight to the customize settings to tone down the grid intensity. It's always the first thing I do. The colour changes but if I restart max the setting reverts to the installed default. Strange thing is, I also change the viewport active border colour, but that setting is being remembered fine.
I can't remember ever having problems installing max, but first the 2013 installer caused all sorts of problems with .NET, and now this.
What I am trying to do is to have a flat vector brush in black that I can change to whatever colour I want later just be selecting the colour from the colour bar while I am working.
So. When I edit the brush I go to the fill Properties tab and select 'Local colours replace - all brush colours' and save. The trouble is that it does not seem to save this setting. When I edit the brush again it reverts to 'local colours replace - named colours' I get the same problem if I 'save as new'.
Is this a bug? I can't save a custom export preset. I set it up, hit save, give it a name then don't see it in the list.
View 2 Replies View RelatedI have both a Sony NEX 5 and a Sony NEX 7. I want to establish custom default settings specific to each camera and for each ISO setting I use in Lr. I know Lr has the capability to make default settings for specific camera bodies according to serial number. Sony did not include body serial numbers in the Exif files for the NEX camera line. Since I only have 1 each NEX 5 and 7, will my copy of Lr create separate custom default setting for my specific cameras so long as I don't add additional NEX 5/7 cameras to my Lr setup?
View 1 Replies View RelatedHow can I stop LR from changing my custom White Balance on importing RAW Infra Red files?
View 1 Replies View RelatedI just got a new system installed corel draw fresh, loaded all my gms's , imported workspace , great all work as before all my menus are nice and active...,
However my custom gradients have disappeared..., it took me a while to set up certain gradients and I removed lots of the useless default ones that were there preset in the previously installed corel draw.
I accessed my old hard drive and found the gradient preset file however when I copied and replaced with the old gradient file the gradient data is not there....
location C:Program FilesCorelCorelDRAW Graphics Suite X6DrawPresetsStyles - FountainFills.cdss
is there another location where my old gradients would be saved?
I cannot remove old settings/measurements from Lightroom 4.1 crop custom settings panel. I thought it was supposed to remove old ones as new were added this is not happening.the panel is full and I cannot remove to add new.
View 1 Replies View RelatedI have a client, who use Lightroom.After software update, all his pre-defined custom brush settings are disappeared. It is possible to reload the old settings from somewhere?
View 2 Replies View RelatedI'm changing computers and need to transfer over my custom document output settings in Bridge but don't know how to locate them. I have several types of custom documents.
Using CS5 Windows on a Windows 7 computer.
Is there a way to have my custom settings load when exporting a .jpg every time, without having to use the dropdown and select mine every single export?
View 2 Replies View Related