AutoCAD 2010 :: Migrate Custom Settings
Jul 16, 2011
I am trying to move to a new computer and when I try to export the settings from my old computer using the 'Export AutoCAD 2012 Settings' command I get the following:
An error occured during the xport process. Please try again.
ERROR: There was am error generating the XML file.
Environment:
Windows XP Pro SP3
MS Office 2007
AutoCAD 2012 (part of AutoCAD Revit Architecture Suite 2012)
Otherwise, I have no problems with AutoCAD. I cannot work without my own AutoCAD setup?
View 7 Replies
ADVERTISEMENT
Nov 2, 2011
We are curently using ACAD2011.
I installed ACAD2012 but never got the Migrate custom settings box upon opening ACAD2012 for the 1st time.
I reviewed Autodesk Help that ensured me that I could also find it thru:
<start...Autodesk mech 2012Migrate custom settingsmigrate from a previous release>
Epic fail... all that showed up there was export and import autoCAD 2012 settings.
Where oh where could my migration tools box have gone? Why is it not there?
(FYI, this happened to us when we upgraded from 2010 to 2011 also but we thought we had done something wrong so we eventually just manually transferred files over. That was very time consuming and we do not want to perform that exercise again.)
View 9 Replies
View Related
Mar 25, 2013
I'm working with some clients and I, myself, am rather new to AutoCAD. We are using AutoCAD LT 2010. I found, in this forum, how to export custom settings. We exported settings and then imported them on a new computer. All seemed well with one minor exception:
He mentioned that every thing exported as far as window settings go, but within each applet (I'm not sure what it's called when you replace the ribbon with drawing applets), some of the icons weren't in the location where he had it. He reported that his copy icon was in the location that his "Cut" icon was.
View 9 Replies
View Related
Oct 19, 2011
How can I migrate my custom settings from AutoCad LT 2008 to AutoCad LT 2012?
View 9 Replies
View Related
Feb 22, 2012
Is it possible to migrate settings from Autocad 2011 to Autocad 2012 on 2 different computers.
Bought new computer and installed Autocad 2012. I never installed Autocad 2012 on old computer.
Am I forced to load 2011 on new computer, migrate settings from old computer and then migrate settings to Autocad 2012.
View 8 Replies
View Related
May 31, 2012
I've made some customisation in the ribbon of a 2013LT version.
Now some customisation functions are only available on the Full, so I download and install it but I can't find a way to import all those custom settings grom LT to Full...
Seems it works only from LT to LT or Full to Full..
View 3 Replies
View Related
May 2, 2012
In 2012, when I click on a viewport and try and to change the scale, in either quick properties or the properties window custom scale. AutoCAD only allows the standard scale settings, not a custom one. I think this is just a matter of some setting, but do not recall it.
View 5 Replies
View Related
Dec 10, 2012
When I try and load my cui file, my custom toolbars and settings do not show up?
View 9 Replies
View Related
Apr 27, 2013
I've installed R2014 Suite, but I’m unable to Migrate Settings from the Start Menu after rebooting.I have both R2012 and R2013 installed on this computer. The Migrate Setting Tool doesn’t think I have a previous release installed – Error Message3.Then when I open R2013 (not R2014) and try it, I get Error Message4.
View 3 Replies
View Related
Aug 16, 2013
Being unwilling to mortgage my future to CC, I have taken the plunge and bought CS6 while it is still available. This is on Windows 7.Is it feasible to migrate settings from CS2 to CS6 and if so how do I do it? I am not sure whether CS6 installation will automatically uninstall CS2 or require me to do it.
View 21 Replies
View Related
Dec 2, 2013
How do I migrate my Custom Tool Palettes and Custom Toolbars from Civil 3D 2012 to Civil 3D 2014?
What files do I need to create or copy to transfer to 2014?
My Custom Tool Palette consists of Block Symbols, Border Sheets, Scales and Seals, Lisp Routines etc.
My Custom Toolbar is just a number of standard cad commands I've put together in my toolbar like Revision Cloud, Layer Isolate, Match Properties, Attach Image, etc.
Do I need to export out my cui file, do I need to create a Profile file, do I need to setup the same directory structure naming and copy my files into those same directory names?
Or is there some easy hidden Magic Button in Civil 3D that you click on and it does the rest?
View 3 Replies
View Related
May 28, 2013
How do I migrate my saved custom HDR presets on my laptop to my main computer? Both have ps6.
View 3 Replies
View Related
Nov 9, 2012
We are a firm using ACAD 2011 w/ a custom toolbar that has an Auto Purge "tool" it currently deletes duplicated layers, reg ops, duped scales etc. we are wondering what else it can do (or any other tools that may be of use) or how can we get it to do more for us, like restrict referencing files from "unwanted" locations and any other tools that are essential to reducing the size of a drawing so its now so slow
View 3 Replies
View Related
Oct 28, 2013
I recently purchased a new desktop computer and wanted to migrate my custom settings from my older laptop using the export utility. I successfully exported the zip file but when importing to the new computer, I get this message: "This file is not an AutoCad LT2012 - English Migration Package".
I have repeated the export to several different media (flash drive, cloud folders) with the same result when attempting to import the file.
View 1 Replies
View Related
May 23, 2012
I cannot find my point settings.
View 7 Replies
View Related
Feb 1, 2012
Is there a way to use the stretch command like this?First I select the object. type stretch, when i make my selection window the stretch points of only that object get selected and not of other polylines which are inside my selection box.
View 4 Replies
View Related
Jul 2, 2012
We loaded up C3D 2013 a month or so ago. I exported my user profile (Options>Profiles>Export) from C3D 2012 and loaded it into 2013. Now the profile will not stay loaded. I have to reload it every time I startup C3D. It also doesn't hold my view cube settings or my panes.
View 4 Replies
View Related
Jan 6, 2012
I am upgrading to 2012 from 2008. Will all of my custom settings/ linetypes/ blocks, etc. automatically transfer over?
View 1 Replies
View Related
Jan 16, 2013
I built a new computer, Windows 8, 64 bit.
Installed Acad LT 2011 64 bit.
Did an export of custom settings from a Windows 7 64 bit LT 2011 installation, imported those to the new Windows 8 LT 2011 installation. This was done using the Start>Programs menu. (I ditched the "Metro" stuff.)
The setup looks mostly the same, but when I go to use it, the icons don't match the commands. I have toolbars down the left and right sides with many icons. The icon for Hatch runs the Polygon command. The Move icon runs the Offset command. Lots of them are screwed up.
The ribbon commands along the top seem to be OK.
View 2 Replies
View Related
Oct 31, 2012
My company have some custom menus and some some lisps that are related to it.
to install the menus in r14 first we opel tools/options/Files then we add the custom folders under the Support File Search path then we load the menu and open the Display screen menu and after all the commands can used under the screen menu.
this also work under acad 2000 but cannot find a solution under 2010
View 1 Replies
View Related
Dec 10, 2013
I'm running LT 2014 at Win7 x64 and have a problem with Xerox WF 6604 custom size paper settings.
Simply say when I change custom printer size at the printer's driver settings and confirm all dialogs nothing happend and LT use default settings. No dialog about new or temporary PC3 appear so looks that ACAD doesnt know about change at the printer driver?
This problem isn't continual but, for example, I printed something from the same dwg twice, but when third one change was set the very problem will appear and ACAD doesn't register changes.
View 9 Replies
View Related
Nov 2, 2007
I have a line path and I want to apply a brush stroke to it. I know how to do this and i was wondering if there is a way to apply a gradient colour to the stroke at the same time. it is a curved line so a gradient mask doesn't achieve what I need. i want the line to consistently change colour as you go along it even round curves.
View 5 Replies
View Related
Dec 30, 2012
I installed 2013 and went straight to the customize settings to tone down the grid intensity. It's always the first thing I do. The colour changes but if I restart max the setting reverts to the installed default. Strange thing is, I also change the viewport active border colour, but that setting is being remembered fine.
I can't remember ever having problems installing max, but first the 2013 installer caused all sorts of problems with .NET, and now this.
View 4 Replies
View Related
Aug 28, 2012
What I am trying to do is to have a flat vector brush in black that I can change to whatever colour I want later just be selecting the colour from the colour bar while I am working.
So. When I edit the brush I go to the fill Properties tab and select 'Local colours replace - all brush colours' and save. The trouble is that it does not seem to save this setting. When I edit the brush again it reverts to 'local colours replace - named colours' I get the same problem if I 'save as new'.
View 5 Replies
View Related
Aug 30, 2013
Is this a bug? I can't save a custom export preset. I set it up, hit save, give it a name then don't see it in the list.
View 2 Replies
View Related
May 24, 2012
I have both a Sony NEX 5 and a Sony NEX 7. I want to establish custom default settings specific to each camera and for each ISO setting I use in Lr. I know Lr has the capability to make default settings for specific camera bodies according to serial number. Sony did not include body serial numbers in the Exif files for the NEX camera line. Since I only have 1 each NEX 5 and 7, will my copy of Lr create separate custom default setting for my specific cameras so long as I don't add additional NEX 5/7 cameras to my Lr setup?
View 1 Replies
View Related
Sep 10, 2013
I just got a new system installed corel draw fresh, loaded all my gms's , imported workspace , great all work as before all my menus are nice and active...,
However my custom gradients have disappeared..., it took me a while to set up certain gradients and I removed lots of the useless default ones that were there preset in the previously installed corel draw.
I accessed my old hard drive and found the gradient preset file however when I copied and replaced with the old gradient file the gradient data is not there....
location C:Program FilesCorelCorelDRAW Graphics Suite X6DrawPresetsStyles - FountainFills.cdss
is there another location where my old gradients would be saved?
View 2 Replies
View Related
Sep 21, 2012
I cannot remove old settings/measurements from Lightroom 4.1 crop custom settings panel. I thought it was supposed to remove old ones as new were added this is not happening.the panel is full and I cannot remove to add new.
View 1 Replies
View Related
Oct 16, 2013
I have a client, who use Lightroom.After software update, all his pre-defined custom brush settings are disappeared. It is possible to reload the old settings from somewhere?
View 2 Replies
View Related
May 29, 2011
When starting acad with Startup set to 0 or when launching from a drawing on file, I do not have any problems, however, when Startup is set to 1, not only does the startup menu appear as a blank pop -up, but the AutoCAD splash screen just hangs without the program launching.
Could it be due to the fact that I am running a 64 bit System?
View 2 Replies
View Related
Jul 18, 2012
I'm changing computers and need to transfer over my custom document output settings in Bridge but don't know how to locate them. I have several types of custom documents.
Using CS5 Windows on a Windows 7 computer.
View 2 Replies
View Related
