I am changing from AutoCAD 2011 to 2012. I created a custom tab in AutoCAD 2011 with custom panels that had all the buttons I use most often. Despite saving the workspace and the profile as I was told, it hasn't shown up in 2012.
How can I get my custom tab to show up in the 2012 ribbon, without recreating it from scratch?
I've created a new sheet set with some existing drawing files. These files have several layout tabs in each drawing. The Sheet Set Manager (SSM) seems to import the layout tabs in random order, not in the order they appear on the drawing, nor in alphabetical or numerical order. In addition, the SSM imports and numbers all of my drawings in reverse order. Any system variable setting, or some other property setting somewhere that will change this back to ascending order?
View 7 Replies View RelatedJust digging into 2012 and I can't seem to locate a custom toolbar UI. I have a set of customizations that I distribute to my group thru a shared drive and we are used to them all being in one place, in every environment. It appears that in order to do this I have to customize the ribbon tabs for each environment individually and manually? That can't be the case though, very counterproductive, there must be another way.
View 9 Replies View RelatedJust digging into 2012 and I can't seem to locate a custom toolbar UI. I have a set of customizations that I distribute to my group thru a shared drive and we are used to them all being in one place, in every environment. It appears that in order to do this I have to customize the ribbon tabs for each environment individually and manually?? That can't be the case though, very counterproductive, there must be another way.
Inventor 2012 Pro 64bit
Vault Manufacturing 2010 Admin (2012 soon)
Windows 7 Pro 64bit
Quad Core processor 2.26 Ghz
16 GB DDR3 RAM
1.5 GB Nvidia Quadro FX 4800
2 – 320 GB SATA drives
When I open The Lightroom, I do see the Tabs such as: Library Develop and other Tabs on the Top of page.
When I click on Import and I choose a folder I do see all the pictures of that folder in the middle of the page,,But The Tabs such as Library ,Develop, and other Tabs disappear. I am watching a Video Tutorial and I think I am doing some thing wrong.
I know how to insert title block in a layout tab. i want the title block to be the same block in all the tabs i am using. if i have 10 tabs i would like each layout tab to have the same title block. i will also need properties to where i change the date on the cover sheet, all layout tabs will be changed at the same time.
this also needs to be 1 file and not a base file and xref.
i know this works because i am working in autocad where it is implemented. this was done by an individual before i started at this job.
I would like to be able to consolidate my layout tabs. I have a drawing of a factory that is of some size and the plant is continually growing. I like having all of my information in one place as the drawings (one .dwg file) change. AutoCAD is not capable of doing so? I'm not willing to break up into separate dwg files either.
View 4 Replies View RelatedI created a new work space and under my new workspace shows only the Express Tools. How do I load all the others? If I go into any of the default workspaces all the tabs shows.
View 1 Replies View RelatedI want to rename some ribbon tabs. For example in C3D I have an insert tab, but also a map insert tab, but they are both named "Insert". I would like to be able to rename one of them Map Insert instead of just Insert.
View 3 Replies View RelatedWe are a firm using ACAD 2011 w/ a custom toolbar that has an Auto Purge "tool" it currently deletes duplicated layers, reg ops, duped scales etc. we are wondering what else it can do (or any other tools that may be of use) or how can we get it to do more for us, like restrict referencing files from "unwanted" locations and any other tools that are essential to reducing the size of a drawing so its now so slow
View 3 Replies View RelatedMy Ribbon is blank and says, "The Ribbon does not have any tabs or panels currently loaded."
I have tried "reseting" my CUI acad.cuix file and restoring it and it won't work -- I heard that was the golden ticket to my problem; however, my ribbon still says it doesn't have tabs or panels loaded...I've tried restarting AutoCad and then reseting my main cuix file as well.
Pertaining to the title. I somehow did something which has caused my model/layout tabs to disappear! How do do I get them back?
View 2 Replies View RelatedHave installed 3 Autodesk Exchange add-ins and they each create their own ribbon tab named "Add-Ins". Is there an easy way to combine them into the same ribbon tab?
[URL]
Why autocad always starts up with 2 layout tabs available on the drawing. In the template that I have created only one layout tab is available and if I create a new drawing according to that template after startup, only one layout tab is available. The template that I have created is set as the basic template for autocad, so it starts up using this template.
Now I want autocad to startup with only one layout tab available.
I am having trouble trying to change the View Scale in the the layout tab. Someone before me changed it to be 1:0.808 and now when i print my drawings they are all smaller than what is shown on the screen. how do i go about changing this number so its 1:1?
View 9 Replies View RelatedI just changed jobs to a company that uses MEP2012. It seems as though it is not possible to revert to Acad classic with this version. So, I am trying to mimic classic as much as possible.
One of the challenges I have found is finding the paper space tabs and model tab? it used to be directly above the command line, is there a command to turn it on?
issues switching layout tabs by clicking on the tabs?
Occasionally, clicking the Model or other layout tab results in no action, as if I'm not clicking on it.
All other controls (within and external to C3D) function normally so it's not a mouse hardware issue.
It will usually correct itself if I "restore down" the main application window, then maximize it again.
The -layout command is a workaround too.
AutoLISP for Combining Layout tabs into single PDF file?
View 1 Replies View Relatedhow I can disable the preview image for model and layout tabs?This happens when I put the cursor over these tabs.
View 6 Replies View RelatedI recently purchased a new desktop computer and wanted to migrate my custom settings from my older laptop using the export utility. I successfully exported the zip file but when importing to the new computer, I get this message: "This file is not an AutoCad LT2012 - English Migration Package".
I have repeated the export to several different media (flash drive, cloud folders) with the same result when attempting to import the file.
Is there a way to export multiple layout tabs to create individual CAD files at one time? I have a CAD file with 80 layout tabs. All the Drafting work was done on Paper Space of the Layout Tabs. Client wants 80 separate CAD files.
I tried right clicking on the layout tab but it will ONLY allow me to export one tab at a time.
I'm importing custom iproperties from an excel document into inventor using the code I've written below. I've figured out how to bring up a dialog box to select the excel file I need, but I'm completely stumped when it comes to selecting the sheet within the file. As it is now, I'm specifying the sheet in the code itself (Str. C). My goal is after selecting the excel file from the dialog box, have ilogic list all the sheets within the excel file, then be able to select which sheet I need using a radio box, list box or some sort of prompted entry.
DimfdAsOpenFileDialog=NewOpenFileDialog()
DimstrFileNameAsStringfd.Title="Open File Dialog"fd.InitialDirectory="C:"
fd.Filter="All files (*.*)|*.*|All files (*.*)|*.*"
fd.FilterIndex=2
fd.RestoreDirectory=True
[code]....
My company have some custom menus and some some lisps that are related to it.
to install the menus in r14 first we opel tools/options/Files then we add the custom folders under the Support File Search path then we load the menu and open the Display screen menu and after all the commands can used under the screen menu.
this also work under acad 2000 but cannot find a solution under 2010
I am trying to batch plot to PDF's from a drawing file that has multiple tabs in it. I would like each tab to be a separate PDF file. We are utilizing Acrobat X to write the PDF's. AutoCAD places all of the tabs into one file whether I tell a Multi-sheet file or a Single-sheet file.
View 6 Replies View RelatedHow can I stop LR from changing my custom White Balance on importing RAW Infra Red files?
View 1 Replies View Relatedif it's possible to import a list of coordinates into a drawing so that it places points in the drawing at the specified locations?
View 2 Replies View RelatedI'm new (again) to using AutoCAD and am a GIS user. I just wanted to know if there was a way to import an ESRI shapefile (.shp extension) into AutoCAD 2011. This is the only version I have and don't really have any extensions with it. Can I do this or do I need different software?
View 8 Replies View Relatedi Have the dwg drawing in which a table is made by simling joining the lines & putting the text in those line.Can that data in actual be converted into the table?
View 1 Replies View RelatedI am trying to import Solidworks 2010 *.sldasm files, but I can not view them. The system sees the file, but nothing is displayed
View 4 Replies View RelatedI'm experiencing a strange behavior when i import a DXF with a plugin for AutoCAD 2012, but only when i'm on Win7 64bits.
The plugin normally (in WinXP) would load the .dxf file, then if it has a reference for an ortophoto picture, it places the picture on the right place and "visible" (you'll get what i mean by this later).
On the other hand, on win7 64bits when i import the dxf file using the plugin, it only shows the frame of the picture, but no picture inside!
cadgis_1
But, if i close the file i just opened and open the .dxf using Autocad "default" open, on the layout the picture is showing just like it was supposed to...
Autocad_layout
So, now i've opened the .dxf using Autocad, let's try again to open it using the plugin and.... voilá! The picture is displayed, bright and shinny! A miracle i must say!
cadgis_2
And if i open it again using the "default" open from Autocad, not only it displays the picture on Layout but also on the Model!
Autocad_Model
I'll attach the dxf with the external .tiff file.
DXF File
Tiff File
I wasn't able to upload the picture, so i've placed in a zip file and attached it to the post.
Is there a method to import Layers from existing DWG file to another? I want to import all layers with their names.
View 3 Replies View Related