AutoCAD Inventor :: Computer Freezes In Assembly Mates?
Oct 27, 2011
My computer freezes when I create a mate in any assembly, at the first attempt to create a mate, I select both faces, and just when I click to make the mate, the part moves, and after the part moves, my computer just freezes, totally, nothing to du but turn it off by forcing it with the power button, this happend with Inventor 2011 and now with Inventor 2012 student version.
I have an ASUS Notebook G73jh Series with ATI Mobility Radeon HD 5870 1GB GDDR5 graphics card
View 4 Replies
ADVERTISEMENT
Jun 23, 2011
I just became a part of the Student Community here, and downloaded Inventor Pro. I actually had some problems right off the bat: some kb971153 file was missing, so I had to find a hotfix from MS and install it before it would let me install Inventor.
Anyway, I opened up Inventor, and found that within seconds of loading up a new .ipt file, my computer would freeze. I can confirm that ctrl+alt+del, mashing several other buttons in frustration, and thinking of creative ways to use four-letter words to describe the situation don't work. As far as I can tell, .dwg files work just fine, it's just the .ipt ones that are kick my blood pressure up a notch.
If I remember correctly, the hotfix had to do with individual licensing or something, so it shouldn't be the cause right? Everything else on the computer works just fine; if I downloaded the wrong fix or something, I figure I'd see some problems with the computer overall. So I'm lost. Maybe it has to do with the stuff the .ipt file is trying to load or access but, either way, it's causing me to have to turn my computer via power button, something I'd rather avoid.
View 9 Replies
View Related
Aug 1, 2013
Used Solidworks at my old job, now starting to use Inventor.
One feature I remember, was 'copy with mates' within an assembly. See [URL] .... for info
I could grab a component (which had mates) and quickly copy it and place it by selecting relevant surfaces, lines, planes etc and it would be inserted as a second instance, fixed in appropriate place.
My problem in Inventor, is that I insert a repeat of a component, but I have to re define each mate individually.
Any work around to apply multiple instances of components which are constrained within an assembly.
View 4 Replies
View Related
Oct 3, 2012
My computer has started freezing (busy spinning wheel) between each command or button click that I do on AutoCAD. The lag time started at 5 sec between each command, which was annoying, but now has increased on complex drawings to up to 45 seconds between anything I touch. I work with 3D models and it's has gotten to the point where I cannot get any work out. I've turned off and on paging, turned off network connections, turned off properties and nothing seems to work.
View 3 Replies
View Related
May 14, 2013
Because the new Building Suite Design programs won't run on windows vista, I've been upgrading some of our older computers to windows 7. Most are working fine but having problems with one computer.
Specs of this computer (it's pretty old I know)
Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz (4 CPUs), ~2.5GHz
Asus P5K SE/EPU
NVIDIA Quadro FX 570
8gb ram
So I formatted this computer and installed windows 7 64x pro, installed all the software etc. This computer is also part of a domain. Problem now is opening some AutoCAD files on the server, edit the file then hit the x in the corner to close it, we hit yes to save it then the whole computer just freezes. It doesn't happen with all files, just some and I can't work out what the problem is. ALSO when copying some CAD files from one project folder on the server to another project folder on the server it freezes. No problems copying files to the local computer/desktop, just server-server. The graphics card driver is up to date etc.
View 2 Replies
View Related
Dec 10, 2013
If autocad is running when I unlock my computer it will freeze. It still lets me close out and save my work, but I am unable to do anything else in the program. Sometimes it will crash my video driver recover then allow me to continue working.
View 8 Replies
View Related
Oct 24, 2012
When starting photoshop it freezes my computer everytime. I have to go into the task manager to regain control?I'm using win 7 pro and the cload version of photoshop
View 3 Replies
View Related
Jul 20, 2012
I inserted a picture in a square using powerclip; I also used some lens effects inside the frame; then when I wanted to edit, the program froze my pc completely, not just Corel but also windows.
I am running a 64-bit windows 7, Inter Core i7, 6 Gb RAM.
View 1 Replies
View Related
Jan 24, 2012
I just bought PSP X3 and am unable to install it. The autorun window opens, but I can rarely make it past the licencing agreement, sometimes to the serial number entry, before everything comes to a complete standstill and I have to restart my computer. I've tried installing it under a different user with no luck.
View 3 Replies
View Related
May 29, 2009
My whole computer freezes when i try saving a file in photoshop.So i reboot my computer. Now what the hell! I opened the file and it is only 1 black layer now!It took me days working on it.It is for a client. The file size still states 300mbs,when using Photoshop to open it, i still see a small thumbnail preview of it.but i just can't get all the layers back! Any solutions on this?
View 2 Replies
View Related
Jan 31, 2014
I just started to have trouble with Lightroom 4 on my MacBook. The program freezes when I try to choose a file on my computer or try to select a folder location. When I try to choose where to export my pics, I have to reboot the program every time.
I have tried shutting down my computer and everything.
View 1 Replies
View Related
Jul 15, 2013
I'm having problems opening photoshop CS3 after a clean install. I have deactivated my CS3 product on my old computer, that run on windows XP. With my DVD installed on my new computer that runs on windows 7. After the installation, I tried to open photoshop to activate. When the program stats to open and freezes almost instantly. I have to open the task manager to close the program that appears not responding.
My new computer is a Workstation, S5000XVN Intel motherboard, 24 Gb of Ram, NVidea Quadro 2000.
View 3 Replies
View Related
Jan 8, 2013
Why does my PSE11 make my entire computer freeze when I try to save an image I've jsut edited?
View 2 Replies
View Related
Jun 6, 2012
I am using INV 2012 and I wan to to know a trick how to convert the weldment assembly back to regular assembly template.
View 1 Replies
View Related
Jul 10, 2012
I'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies
View Related
Sep 18, 2012
We have an iLogic assembly with to parts in it. Maybe to cylindrical parts. The iLogic rules should do the following.
1. Start a Rule after open document.
2. This Rule starts a Rule in the first cylindrical component.
3. This Rule ask the user for a diameter.
4. The assembly gives this new parameter value to the second component
5. Then the assembly calls another rule in the second component to change it with the new parameter
Everything is working fine when the following combinations are taking place:
1. I open up the assembly out of vault or from a local drive or an accessible server drive
2. I insert the assembly as sub assembly in another assembly from a local drive or an accessible server drive
It don't work with the following situation:
- I insert the assembly as sub assembly in another assembly out of vault
Then the user becomes the dialog "Choose a diameter" twice.
I don't know why, but I have the idea it has something to do with the functionality of inventor to insert a component more than once. If you insert a component in an assembly Inventor gives you the opportunity to add more than one occurence after each other.
change that behaviour? Maybe a switch to change that inventor "add more than one occurence" behaviour.
View 1 Replies
View Related
Feb 9, 2012
I have encountered a problem with the Tube and Pipe styles.
As you can see, I have a rack assembly with a custom tube and pipe style. A wire as a tube in orange, and a tube support in white. Both have their seperate colorations at a style in the tube and pipe styles editor
When placing the rack assembly into the main assembly, it reverts to the coppor coloration I changed from the original style.
Steps I've taken:
Exported the styles .xml and Imported the styles into the master tubeandpipe.iam
Imported the user created .xml styles into the main assembly file nothing seems to work
View 8 Replies
View Related
Apr 23, 2012
I am trying to find the interior volume of an assembly (when am I not?!?!) by subtracting the assembly from a block that surrounds the most of it. Somewhere the assembly has a "leak" and I have been trying to use the Cross Section Analysis to track down where the inside lump is connected to the outside lump to be subtracted. Is there a less time consuming way to dynamically drag a plane across and get cross sectional views?
Even better is there a simple way to animate the analysis plane moving across the block so I can hopefully just watch and pause it when I find a leak?
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
View 2 Replies
View Related
Oct 30, 2012
it is possible to make a constraint that utilized a parameter of a part within the assembly.
For example, if I wanted to use the thickness of a plate, which I defined in the part, could I call that parameter in a constraint?
View 1 Replies
View Related
Oct 31, 2011
My assembly has grown (about 50 parts) to where I need to consolodate some parts into subassemblies for reuse and alternate iterations of the basic design.
When I import the original parts into a new assembly, all of the constrains I created are not there of course.
I've tried creating a new empty part and then deriving a new part from the assembly, but I can't add, delete or edit any parts.
I looked at using Shrinkwrap, Substitutes, iParts, Multi-body Parts, and Multiple Solids but I remain confused.
In retrospect, maybe I should have created the subassemblies between the part and assembly stage but I didn't.
View 4 Replies
View Related
Nov 9, 2011
I want to be able to control the location/position of a component in an assembly. This is easy enough through the iProperties/Occurrence tab and then adjust the location of the X,Y, and Z offsets. Is this possible using iLogic? I have been unable to find a function to access via iLogic. Ultimately I am trying to translate a component about an axis not a pattern.
View 1 Replies
View Related
Nov 28, 2011
Can I select a bunch of parts in an assembly and say "save these pieces as a new assembly"?
It is just such a needed tool but I cant find an easy way to accomplish this.
View 2 Replies
View Related
Oct 3, 2013
I have a two part duct fire damper assembly. The IDW has the combined two part assembly, which I know how to turn the CoG on, so that it can be dimensioned. The problem is each piece will more than likely be hoisted separately so I would like to show the CoG for each piece, not the combined master assy.is there a way to do this?
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
View 5 Replies
View Related
Sep 3, 2013
I would like to see if there is a routine that allows my iLogic code to detect if my assembly contains another assembly within it. If my assebly contains assemblies then I don't want "MyRule" to run. Else if it does then I want "MyRule" to run.
View 4 Replies
View Related
Mar 21, 2013
My Assembly has two possible positions for my piston.
I would like to show both piston positions (top and bottom) in one drawing file; however, in different drawing views.
I have tried using LOD and Drawing View Representations, but it is my understanding that neither of these are meant to be used in this way.
View 2 Replies
View Related
Mar 28, 2012
I am having PDS Ultimate 2012 and working on inventor. when i open a file or open a new template ribbon freezes means menu bar doesn't work properly,if i change the ribbon appearance it doesn't update also i cannot switch between the menu bar tabs and if i turn on the visibility of the datum planes it doesn't show on the screen.But when i refresh the windows everything works sometimes. i have installed SP1 and even repaired inventor.
System Config:
OS Name Microsoft Windows 7 Professional
System Manufacturer LENOVO
System Model 20079
System Type x64-based PC
Processor Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2300 Mhz, 2 Core(s), 4 Logical Processor(s)
Name AMD Radeon HD 6370M
Adapter Type ATI display adapter (0x68E4), ATI Technologies Inc. compatible
Adapter Description AMD Radeon HD 6370M
Adapter RAM 1.00 GB
View 2 Replies
View Related
Nov 21, 2012
If you make alterations to a model, and then switch to vault menu, your model is red with an asterix (requires saving). If you click check in on this, you get the message that it needs saving, click ok. It appears that it has worked but all the buttons on the toolbar are frozen. if you click the big I all the ribbon greys out and you need to restart Inventor. The only button that still works is Suite Workflows.
I have SP1.1 installed as well as the vault hot fix.
View 5 Replies
View Related
Sep 20, 2013
the activation is failed because the serial number i've enterred is not valid. i install AutiCAD LT on tha same computer with new Operating System(Win7)
View 1 Replies
View Related
Feb 8, 2011
Anyway, I just updated to the Factory Design Suite Advanced package for 2011 which, of course, includes Inventor. I have downloaded and installed all updates, service packs and hotfixes I could find btw. What happens is I'll be working in Inventor on a solid model of ANY size (even a single part) and with absolutely no warning, the display window will freeze up and won't refresh. What's really weird though is that Inventor itself is not locked up. I can click on any of the buttons or any of the items shown in the browser as though the program's running normally. I can check the task manager and it shows Inventor to be running normally. The memory status bar in Inventor shows lots of available memory. I can even hover over the display window in the area where the view steering wheel is located and the icon will change appearance as though it's working normally. I can even save the file. If I close the file, it responds like normal and goes back to the default screen. If I try to open ANY file after that, however, the screen will not refresh or show me the file I opened, even though everything else works fine and the program isn't frozen. The only way to restore full function is to completely close and reopen Inventor (on average I have to do this about once an hour). Btw, I'm also working in a local directory stored on my hard drive, not a network.
My first inkling is that it's a graphics issue but I have played with all the display settings to no avail. I ran a diagnostic on the video card and Inventor says that I'm running an Autodesk Certified driver. All the specs are within reason I think.
My workstation specs:
Dell Precision M4500 laptop
Intel core i7 processor, 2.67 GHz
4 GB RAM
Windows XP Professional SP3, 32-bit, running in 3 GB mode
NVIDIA Quadro FX 1800M, 1 GB graphics card (just updated the driver too...no change)
230 GB hard drive, 136 GB free space
View 5 Replies
View Related
May 7, 2013
I have a top level assembly which has more than 5000 components.
It was saved previously in a particular LOD.
Now i want the same assembly to be uploaded to the vault in turn which i should be reactivating the master LOD.
The moment I click activate the master LOD, inventor freezes and stalls for couple of hours.
my machione has a very decent configuration with 32GB ram memory.
View 4 Replies
View Related
Oct 4, 2011
I just started using Inventor and it is very slow, freezes for a few seconds, and is non responsive. My AutoCAD Architecture 2012 works just fine.
View 6 Replies
View Related
