I just bought PSP X3 and am unable to install it. The autorun window opens, but I can rarely make it past the licencing agreement, sometimes to the serial number entry, before everything comes to a complete standstill and I have to restart my computer. I've tried installing it under a different user with no luck.
View 3 Replies
I just downloaded hte free trial of x5 everytime i try to run a script psp x5 it freezes i am running windows 7 64 bit
View 7 Replies View RelatedI had hoped to go from CS4 to Paintshop Pro 4 to process my photos. PSP4 is not working as it should. I begin the edit, get almost through and PSP freezes. My pc has plenty of RAM and storage space. CS4 has never done this. I open up to 10 RAW files at once in CS4 with no problems. I have searched Corel and the web for a clue as to what is going on. I want to leave Adobe and am currently looking for a software replacement. I have used PSP in the past. I stopped using it with the X3 release due to the error messages it gave me and went with Adobe.
View 4 Replies View RelatedPSP X4 opens in the Edit page. When I select the "Manage" tab, the program freezes and I need to use the Task Manager to shut the program down.
I contacted Corel and they told me to reinstall the program. I have done so but the problem still persists. I have the service pack 2 installed.
Windows 7 Home Premium
Dell 64 bit, 3.2 GHz
memory 12gb
Intel i5
I have Paint Shop Pro X5 installed with SP1 on a Windows 8 Enterprise machine. This is not a beta or developer preview of windows 8, it is the final product downloaded from Microsoft Volume Licensing (they do not post betas there).
The installation of X5 was smooth, and the program itself seems to load fine.The first time it ran, it detected an update needed (SP1) which I agreed and applied it.
Next time I ran the program, whenever I click on FILE/OPEN, it does not bring me the windows to browse thru my directories looking for a picture. It freezes completely at that moment until I kill the application with the task manager (as soon as I select OPEN, the program goes into NOT RESPONDING).If I right-click a picture on my disk and select OPEN WITH COREL PAINTSHOP PRO X5, the program works fine and I can work with that picture.
PSP X3 is usually very stable but occasionally when I use the Preset Shape Tool to overlay an arrow onto my image, it freezes permanently. Waiting it out in the hope of self recovery doesn't work. I'm running X3 on a Windows 7 Ultimate Dell Studio 17 laptop, 32 bits, 4 GB RAM.
View 3 Replies View RelatedI have been using PSP x3 for awhile with no issues, but about a month ago, it simply stopped working. I open the program via shortcut, and the logo blinks onscreen, but the program never opens. No explanation, no trace.
I have attempted to uninstall and re-install, but each attempt to uninstall completely freezes the PC dead and I end up having to physically turn the PC off. I'm detecting no infection on the PC.
I'm using X4 and tried Local Tone Mapping for the first time. Any time I try to use it the program freezes and I have to use Task Manager to close it and re-start. It does it on any image I've tried. does it only work on specific file types? Haven't had any other problems with the program.
View 2 Replies View RelatedI had a lot of trouble installing SP1 for Paintshop Pro X6. To resolve the problem, I uninstalled PSP and downloaded a trial verson.
It finally installed, but when I clicked to log-into the registered membership (upper right hand corner), only a dialogue box would appear with "OK" in it. Nothing else.
When I tried to reinstall PaintShop Pro X6, the installation completed properly, but when I tried to run the program, only an "X" appeared in my taskbar.
I have tried removing PSPx6 and re-installing several times. But I have not been able to resolve this. I have been unable to use the program.
My Paintshop Pro X4 was working great, until I registered it today, then all hell broke loose. It crashes and also I cannot get the "Computer" tab to open, only the "Desktop" tab will work correctly. Tried restarting it, same results. I use Win XP Pro SP3 and computer does not have virus, nor malware. Hard drive is 500G. Graphics card is updated and more than adequate.
View 2 Replies View RelatedGet as far as the EULA then just stops.
View 11 Replies View RelatedSo I install windows 7 64bit on a new machine. Install drivers.
First program to install is Paint Shop Prox X3..I install the 5 service packs (that's all there is, right?)And start it.... and it doesn't work.
I see the splash screen (on top of everything *grrr*) and it gets to "Initializing Command Manager" - from browsing the forum i get the idea that its just bad programming and there is nothing to be done?
A friend bought X4 from a retail shop..She says she has installed the SP1 update It hasn't worked...this is what she has said...I don't get that workspace at the bottom mine stops at Dual Monitor
View 10 Replies View RelatedI have tried several times to install PaintShop Pro X4 firstly from the download and now from the CD. Every time I end up with a message saying that I already have a copy of the program installed.
View 3 Replies View RelatedI have a Lexmart Pro 705 printer. The problem also occurred with a canon printer. This also happens with both my Laptop ,and desktop computers.
I will edit a picture so that it looks great on my computer screen , then when I print it on good Kodak paper ,it will be several shades darker. The old photoshop programs had a preference so that you adjusted to the printer. I know there has to be a trick to this.
This will not install. It cannot find PSPPro.msi and neither can I using search. I do have Service pack 2 installed. Everytime I open the program it wants me to update. I am using Windows 8.
View 1 Replies View RelatedJust purchased and downloaded the upgrade to X6. During install, the license information is presented, but after clicking the "agree" checkbox and slecting "NEXT", nothing happens. No error message, the NEXT button remains bold as if it has not been selected. Repeated download with same results with 2nd download. Turned off real-time virus checking, same result.CorelPainterLite (free with X6 upgrade) fails in the same manner.
Dell XPS-8500 with i7-3770 CPU, 12GB Ram, Windows 7 Home Premium 64-bit.
Win XP computer.
Previously ran PSP 9 and PSP X1. All was FINE with thumbnails in Windows Explorer.
Purchased and installed PSP X5
It seem to be doing some hatchet job on pspimage files that I've had stored for several YEARS on this computer. These are files I have NOT opened in X5.
They are showing up as icons for PSP X5 although they were created with earlier versions of the program.
I NEVER authorized any type of conversion. Why would I?
And how do I get the view back without having to install any other program since the view was FINE before installing X5?
I head over to the icon in the top-right corner, "Corel guide". Then I go to the tab "Do more".From here I can download frames, patterns, preset shapes etc. However, I cannot find the downloaded content after installing. I have restarted PSP afterwards, but to no avail. I would try to uninstall and reinstall the packages, but I can't find a way how to do it.
I am using Windows 8 64bit, and the latest update for PSPx5.
I purchased PSP-X4 Ultimate in a box. I was able to install the program itself onto my netbook but neither the Ultimate Pack nor the ProX4-KPT download could install because the popups are so big the buttons to click are inaccessible.
I tried changing the resolution and some other generic workarounds I found in a net search, to no avail.
The program itself was a little difficult to install for the same reason, but there was just barely enough of the buttons accessible to successfully click on them.
I have CS5 installed on a desktop computer that crashed and I can't get it working to deactivate CS5. I am going to purchase a new desktop and would like to install CS5 on the new computer, but it was already installed on two computers (desktop and laptop) so no activations are left. I have the Disk and serial number.
View 1 Replies View RelatedWhen starting photoshop it freezes my computer everytime. I have to go into the task manager to regain control?I'm using win 7 pro and the cload version of photoshop
View 3 Replies View RelatedI inserted a picture in a square using powerclip; I also used some lens effects inside the frame; then when I wanted to edit, the program froze my pc completely, not just Corel but also windows.
I am running a 64-bit windows 7, Inter Core i7, 6 Gb RAM.
My whole computer freezes when i try saving a file in photoshop.So i reboot my computer. Now what the hell! I opened the file and it is only 1 black layer now!It took me days working on it.It is for a client. The file size still states 300mbs,when using Photoshop to open it, i still see a small thumbnail preview of it.but i just can't get all the layers back! Any solutions on this?
View 2 Replies View RelatedMy computer has started freezing (busy spinning wheel) between each command or button click that I do on AutoCAD. The lag time started at 5 sec between each command, which was annoying, but now has increased on complex drawings to up to 45 seconds between anything I touch. I work with 3D models and it's has gotten to the point where I cannot get any work out. I've turned off and on paging, turned off network connections, turned off properties and nothing seems to work.
View 3 Replies View RelatedI just started to have trouble with Lightroom 4 on my MacBook. The program freezes when I try to choose a file on my computer or try to select a folder location. When I try to choose where to export my pics, I have to reboot the program every time.
I have tried shutting down my computer and everything.
I have a new box version of PantShop Photo Pro X3. Using the CD to install, I am getting a 1935 error message.
View 8 Replies View RelatedI'm having problems opening photoshop CS3 after a clean install. I have deactivated my CS3 product on my old computer, that run on windows XP. With my DVD installed on my new computer that runs on windows 7. After the installation, I tried to open photoshop to activate. When the program stats to open and freezes almost instantly. I have to open the task manager to close the program that appears not responding.
My new computer is a Workstation, S5000XVN Intel motherboard, 24 Gb of Ram, NVidea Quadro 2000.
Because the new Building Suite Design programs won't run on windows vista, I've been upgrading some of our older computers to windows 7. Most are working fine but having problems with one computer.
Specs of this computer (it's pretty old I know)
Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz (4 CPUs), ~2.5GHz
Asus P5K SE/EPU
NVIDIA Quadro FX 570
8gb ram
So I formatted this computer and installed windows 7 64x pro, installed all the software etc. This computer is also part of a domain. Problem now is opening some AutoCAD files on the server, edit the file then hit the x in the corner to close it, we hit yes to save it then the whole computer just freezes. It doesn't happen with all files, just some and I can't work out what the problem is. ALSO when copying some CAD files from one project folder on the server to another project folder on the server it freezes. No problems copying files to the local computer/desktop, just server-server. The graphics card driver is up to date etc.
I just became a part of the Student Community here, and downloaded Inventor Pro. I actually had some problems right off the bat: some kb971153 file was missing, so I had to find a hotfix from MS and install it before it would let me install Inventor.
Anyway, I opened up Inventor, and found that within seconds of loading up a new .ipt file, my computer would freeze. I can confirm that ctrl+alt+del, mashing several other buttons in frustration, and thinking of creative ways to use four-letter words to describe the situation don't work. As far as I can tell, .dwg files work just fine, it's just the .ipt ones that are kick my blood pressure up a notch.
If I remember correctly, the hotfix had to do with individual licensing or something, so it shouldn't be the cause right? Everything else on the computer works just fine; if I downloaded the wrong fix or something, I figure I'd see some problems with the computer overall. So I'm lost. Maybe it has to do with the stuff the .ipt file is trying to load or access but, either way, it's causing me to have to turn my computer via power button, something I'd rather avoid.
My computer freezes when I create a mate in any assembly, at the first attempt to create a mate, I select both faces, and just when I click to make the mate, the part moves, and after the part moves, my computer just freezes, totally, nothing to du but turn it off by forcing it with the power button, this happend with Inventor 2011 and now with Inventor 2012 student version.
I have an ASUS Notebook G73jh Series with ATI Mobility Radeon HD 5870 1GB GDDR5 graphics card
