My whole computer freezes when i try saving a file in photoshop.So i reboot my computer. Now what the hell! I opened the file and it is only 1 black layer now!It took me days working on it.It is for a client. The file size still states 300mbs,when using Photoshop to open it, i still see a small thumbnail preview of it.but i just can't get all the layers back! Any solutions on this?
View 2 RepliesWhy does my PSE11 make my entire computer freeze when I try to save an image I've jsut edited?
View 2 Replies View RelatedWhen starting photoshop it freezes my computer everytime. I have to go into the task manager to regain control?I'm using win 7 pro and the cload version of photoshop
View 3 Replies View RelatedI'm having problems opening photoshop CS3 after a clean install. I have deactivated my CS3 product on my old computer, that run on windows XP. With my DVD installed on my new computer that runs on windows 7. After the installation, I tried to open photoshop to activate. When the program stats to open and freezes almost instantly. I have to open the task manager to close the program that appears not responding.
My new computer is a Workstation, S5000XVN Intel motherboard, 24 Gb of Ram, NVidea Quadro 2000.
I inserted a picture in a square using powerclip; I also used some lens effects inside the frame; then when I wanted to edit, the program froze my pc completely, not just Corel but also windows.
I am running a 64-bit windows 7, Inter Core i7, 6 Gb RAM.
I just bought PSP X3 and am unable to install it. The autorun window opens, but I can rarely make it past the licencing agreement, sometimes to the serial number entry, before everything comes to a complete standstill and I have to restart my computer. I've tried installing it under a different user with no luck.
View 3 Replies View RelatedMy computer has started freezing (busy spinning wheel) between each command or button click that I do on AutoCAD. The lag time started at 5 sec between each command, which was annoying, but now has increased on complex drawings to up to 45 seconds between anything I touch. I work with 3D models and it's has gotten to the point where I cannot get any work out. I've turned off and on paging, turned off network connections, turned off properties and nothing seems to work.
View 3 Replies View RelatedI just started to have trouble with Lightroom 4 on my MacBook. The program freezes when I try to choose a file on my computer or try to select a folder location. When I try to choose where to export my pics, I have to reboot the program every time.
I have tried shutting down my computer and everything.
Because the new Building Suite Design programs won't run on windows vista, I've been upgrading some of our older computers to windows 7. Most are working fine but having problems with one computer.
Specs of this computer (it's pretty old I know)
Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz (4 CPUs), ~2.5GHz
Asus P5K SE/EPU
NVIDIA Quadro FX 570
8gb ram
So I formatted this computer and installed windows 7 64x pro, installed all the software etc. This computer is also part of a domain. Problem now is opening some AutoCAD files on the server, edit the file then hit the x in the corner to close it, we hit yes to save it then the whole computer just freezes. It doesn't happen with all files, just some and I can't work out what the problem is. ALSO when copying some CAD files from one project folder on the server to another project folder on the server it freezes. No problems copying files to the local computer/desktop, just server-server. The graphics card driver is up to date etc.
I just became a part of the Student Community here, and downloaded Inventor Pro. I actually had some problems right off the bat: some kb971153 file was missing, so I had to find a hotfix from MS and install it before it would let me install Inventor.
Anyway, I opened up Inventor, and found that within seconds of loading up a new .ipt file, my computer would freeze. I can confirm that ctrl+alt+del, mashing several other buttons in frustration, and thinking of creative ways to use four-letter words to describe the situation don't work. As far as I can tell, .dwg files work just fine, it's just the .ipt ones that are kick my blood pressure up a notch.
If I remember correctly, the hotfix had to do with individual licensing or something, so it shouldn't be the cause right? Everything else on the computer works just fine; if I downloaded the wrong fix or something, I figure I'd see some problems with the computer overall. So I'm lost. Maybe it has to do with the stuff the .ipt file is trying to load or access but, either way, it's causing me to have to turn my computer via power button, something I'd rather avoid.
My computer freezes when I create a mate in any assembly, at the first attempt to create a mate, I select both faces, and just when I click to make the mate, the part moves, and after the part moves, my computer just freezes, totally, nothing to du but turn it off by forcing it with the power button, this happend with Inventor 2011 and now with Inventor 2012 student version.
I have an ASUS Notebook G73jh Series with ATI Mobility Radeon HD 5870 1GB GDDR5 graphics card
If autocad is running when I unlock my computer it will freeze. It still lets me close out and save my work, but I am unable to do anything else in the program. Sometimes it will crash my video driver recover then allow me to continue working.
View 8 Replies View RelatedFirst of all a little bit about the hardware/software:
- Windows 7 Enterprise 32 bit
- ACAD2011 with 1.1
- Nvidia GeForce 8400 GS (not a supported graphic card from what I know)
- Intel i5-750
Since we got that out of the way let's get to it.
A week ago I was told that a lot of times the PC's freeze when you try to "Save", "Save as" or "Open" a file (we open/save on a network drive). If that happens we have to restart the PC and hope it doesn't happen again, but since this happens quite a lot (over the course of four days about 27 times on 7 PC's) I tried to fix this.
I installed the patch, updated the drivers for the graphic card and reinstalled NET Framework 4. The problem didn't occur as often but it still happened sometimes.
Photoshop CS3 has to be closed via task manager because it freezes when I try to save my work. Deleted the prefs.
View 11 Replies View RelatedI am in PS 7 (Yeah my knuckles drag a little but I can't afford to upgrade)
Everything works great until I try to save the image, then it freezes but not completely.
I can still move around but all of the menu items are dead and nothing works.
I have re installed 6 times and still the same.
Photoshop is unusable for me. I was running CS6 but it kept freezing when I tried to open a file. I uninstalled and installed CC -- same problem. I checked the preferences to see if there was a setting for an Adobe file dialog and it froze again.
I suspect it has something to do with Mountain Lion 10.8.4 but I don't have this problem in other Adobe apps. Ran Disk Utility, verified permissions, verified disk -- everything checks out. Not sure what to do.
I have the minimum requirements on my system, I have reinstalled (twice) with the proper rebooting afterwards, etc.,
View 1 Replies View RelatedSince I have a new laptop with Windows 8, I couldn't get Photoshop CS6 anymore, so I downloaded PS CC. It's working great the last days, but since yesterday PS freezes or closes every time I try to save a .gif in save for web and devices.
View 1 Replies View RelatedWhen I save or save as and EPS, the window that I'm working on, the pallets, and all the toolbars freeze. I am still able to access the Menus at the top, and if I turn some of the pallets on and off, it unfreezes.
I'm running OSX 10.4 on a Mac Pro with 5GB RAM.
I just started using Illustrator CS 5.1 on a new laptop running Windows 7. (I have used it for over a year on an older computer running Windows XP with no problem). For the first month or so on Windows 7 it worked ok (saving was somewhat slow) but suddenly it freezes every time I save - sometimes it will eventually save - after 5-7 minutes - yes, I timed it...
View 1 Replies View RelatedMy illustrator won't let me save in pdf, it allows me to print in pdf but the option window for saving in pdf doesn't appear and the program freezes, last week it was working fine. I already tried deleting the settings folder and i don't work with multiple monitors so i couldn't have misplaced de window. I tried uninstalling and reinstalling but it didn't work.
View 2 Replies View Relatedwe have a new lab in our district with Autocad 2010 64-bit version installed on HP Compaq 8022 Elite SFF computers. There is 4 GB memory on the computers and a Quadro 400 graphics card. Autocad and Windows 7 64-bit have both been updated to the latest versions. The Autocad application locks up almost every time someone chooses the new document icon, or when they try to 'save as'. Sometimes when they choose to open a new document first, close that dialogue box, then try to choose the new document icon it works ok. But, for the most part, the application is unuesable. Some possible solutions we found online that don't work are to not use the Aero themes (we don't) and to not use Norton AV (we don't).
View 9 Replies View RelatedHow can I save a picture package to my computer?
View 2 Replies View RelatedI can save a .ai file but not a .eps file it starts but freezes and does not respond
View 7 Replies View RelatedAm unable to save a picture package to my computer. Once viewed and printed in the print screen the photo package cannot be saved.
View 1 Replies View RelatedHow do i save group photos into a folder on my computer?
View 1 Replies View RelatedI want to know if I can get a compacted guide into quickly and effectively save all my autocad settings in a computer to be used elsewhere.
My personal settings include:
1. alias
2. autolisp that are loaded in the cui
3. an escape autolisp that is part of the right click context edit menu
4. re-arrangement of short cut menu (i.e addition of dimension linear, dimension aligned, plot)
5. new menu with new macros
6. option profiles
7. plot styles
8. hatches
9. libraries of block
10. palette
11. workspace
I know the list is long and can be longer and most of the time as I switch from one computer to another, there is the same repetitive task of copying, resettings and so on. Are there any effective way to transform an autocad post with all my settings at once, that effectively save all the settings and the files and the blocks and templates and effectively load all of them onto a new working post.
Somewhere it looks impossible, at least in its totality but who knows this may be possible.
I have CS5 installed on a desktop computer that crashed and I can't get it working to deactivate CS5. I am going to purchase a new desktop and would like to install CS5 on the new computer, but it was already installed on two computers (desktop and laptop) so no activations are left. I have the Disk and serial number.
View 1 Replies View RelatedI started a new computer with LR5, and it runs fine. But, when I imported my pics from a previous computer running LR4, all the pics loaded into the new LR without any tags or processing. How can I get that info without having ot reprocess thousands of pictures?
View 1 Replies View RelatedPhotoshop CS3 freezes after making an adjustment layer using levels. A description of where the picture is located on the computer (usually only seen as a mouse over) appears and is also frozen.
I am unable to save the file and have to end the program and lose everything if it is not already saved. I have Windows XP with service Pack III. I do not have this problem with CS2. I would appreciate any ideas.
My photoshop CS2 frequently freezes when I do simple commands such as altering hue/brightness and double clicking on a slice with the slice selection tool.
View 10 Replies View Related