AutoCAD Inventor :: Shell Feature Causing System To Freeze?
Jun 1, 2012
Having problem with a particular file crash/freeze/not respond whenever using the shell feature on Inventor LT 2013? I am operating with Windows 7. I have the AutoCAD Inventor LT 2013 Suite. Just bought the computer two weeks ago and just installed Inventor about two weeks ago also.
In any case, it seems the file of this model is corrupted, as I have never had a problem using the Shell feature before this and shelling other objects even while the corrupted part is open works fine. However, if the "visibilty" of the part in question is checked and i click on the shell button, the program immediately freezes. I am not sure how to work around this and I really do not want to start the entire part modeling over from scratch.
Working with... Autodesk: AutoCAD Inventor LT Suite 2013 | OS: Windows 7 | GC: ATI 6670 | Mem: 8 gigs RAM | Proc: Intel core i5 | Monitor: Acer V213HL
View 9 Replies
ADVERTISEMENT
Sep 17, 2013
Using the shell feature. I have used a bit in the past and its always done what I want. This go around what I want is to shell without removing any outside walls, which it does no matter I seem to try. I can easily add a new outter wall back in, but if I can shell without removing an outter wall it would be just that much cleaner in my tree.
View 5 Replies
View Related
Feb 21, 2012
I am trying to shell out the underside handle of the feature. I have attached my part file along with the assignment briefing file. It is the second part on the page, i.e. the Garlic Press Handle.
View 2 Replies
View Related
Oct 10, 2012
I'm not exactly sure how to verbalize this task, but I'd like to shell a solid by selecting 2 opposing faces amd maintain a center wall. Can this be done using only the shell feature?
Notice the solid below is hollow.
View 8 Replies
View Related
Aug 28, 2012
It has to do with the organizer. I use my desktop for dropping photos too temporarily then delete them. My organizer is always left viewing that at the bottom of the X4 UI. When I delete those photos it still shows their placeholder when I hope X4 again and it freezes. As if its trying to find them and can't so it just stops. I can obviously work around that... somehow I'm sure. But anyway to stop it form doing that? ( I tested it by putting back all the photos it was trying to find. Opened right up without any hesitation.)
Windows 7 , 12GB Ram
Brand new PSP X4 install
View 2 Replies
View Related
Feb 27, 2014
Today I got an error message when trying to export a photo. It has never happened before. Win32 API error 2, system cannot find specified file when calling Shell Execute ExW from AG Workspace. shell execute
View 2 Replies
View Related
Feb 27, 2012
I need to shell out a Loft in the attached IV 2012 part file.The Loft i tried also as a new solid but the shell also cuts into the cylinder ( revolution 1 ) . I only want the 2 sides and bottom of the Loft to be Shelled, not the cylinder. What do i need to change to get the shell to work?
View 4 Replies
View Related
Jan 24, 2012
Is it possible to fill a shell with sand? The end use of my design will have sand - like in a childs plasitc basketball hoop/stand assembly and I would like to try to approximate the center of gravity and other useful info.
ACAD 2010
ACADE 2008
AIS 2009
View 9 Replies
View Related
Jan 10, 2014
Whats the importance of "Shell Connector Tolerance"in the create new simulation dialog box. Any example or some kind of illustration to explain this.
C1
Inventor Professional 2013
Vault Collaboration 2013
View 1 Replies
View Related
Apr 22, 2012
When trying to shell a part i get the error: the attempted shell operation was unable to solve for a vertex....etc. i have attached the problem part file, of which the drawing is a fairly complicated frame (a chassis concept for a 3 wheeled race car i am designing)
How the part was made:It was created in an assembly using the frame generator tool and then converted to part file using the shrinkwrap feature. When using the shrinkwrap command, i selected: single solid body merging out seams between planar faces, All hole patching, break link, and remove all internal voids. and then when trying to shell i get the error message when selecting a wall thickness of 2mm.
i cant understand why the shell feature does not work as i have successfully shelled a very similar part file (with only slight differences in geometry from the file attached in the same way as what i am trying to do with this part). i can provide this part file upon request or the assembly file from which either was created. i need to shell the component in this way so that i can run accurate FEA (stress analysis) for crash simulations on it
I am using inventor 2013 (64bit OS)
View 2 Replies
View Related
Dec 22, 2012
I am trying to make a shell of a mesh feature after I have upscaled it.
I do not think the regular shell technique will work as my mesh feature has hundreds of surfaces. So, I decided to open the file with my part in it and then derive the same part but a little bigger using the derive button. I would then subtract out the smaller, original, one to make a shell of the bigger, derived one.
Unfortunately, when I use this method to upscale, the 2 objects are not concentric so I cannot make the uniform shell that I want to.
I have attached the file of my mesh feature in case you want to see it. not that you will have to convert the object you see on my file into a base feature before doing anything with it. I did not because it would have made the file to big to attach.
View 4 Replies
View Related
Aug 22, 2013
I have a funnel with a curved top. I'm trying to project an inset of the border onto the curved surface and use the shell command to create a hollow funnel with an overhanging lip. I have projected the inset successfully, but cannot select the resulting smaller face, just the whole original face.
A similar problem that I tried while attempting to figure this out was shelling a sphere. 2d sketch -> 3d sketch project onto surface, and try applying shell to the resulting "face". However I can only select the whole face when trying to shell.
View 7 Replies
View Related
Dec 12, 2013
This shape will not shell out with a 3mm thickness.....i suspect i may have not modelled correctly....how would you model this shape part so as it can be shelled out?
View 8 Replies
View Related
Nov 16, 2012
How can i shell out the part with 2mm thickness walls?
View 1 Replies
View Related
Jun 1, 2012
Is there a way to use the Split Solid tool to partially split a circle and have multiple solids after.
Ex) I would like to cut the tank at the 180 and 270 deg marks. Using the split tool still cuts through 0 and 90. I tried drawing a line from a top view that started from center going through 180, but it still goes through 0 as well.
I've attached an example shell of where I would like to have 6 solids after.
View 5 Replies
View Related
Oct 5, 2012
I would like to be able to the share external geometry of a fully assembled mechanical model without surrendering any part or assembly data. Is there a way to turn this assembly into an external surface "shell"…?
View 1 Replies
View Related
Nov 10, 2011
How to create a oval shape.The attached file shows the shape i need.How do i make the shape and then shell out 2mm.
View 2 Replies
View Related
Apr 5, 2013
See Shell 2 .. it shells out but how do i have the Shell to the curved face on Revolution 1.I want the Shell to cut through Extrusion 1 and to the Revolution 1 curved face.
View 9 Replies
View Related
Mar 26, 2012
I have a blade housing that requires a continuos radius around the profile. It is not a full radius. When I shell the blade, it looks like the raidius wants to continue. I was told I had to use two fillets and the particial radius will not work. However, the continuous radious in the customers requirement. Is there a way to shell this part correctly?
View 2 Replies
View Related
Jul 24, 2012
The problem: a complex curvy part will shell 0.5 mm but not 3mm - some of the surfaces fall inside the others.
A work around : Offset each surace (individually - not quilt) then stich & sculpt.
A program: To offset an enclosed surface, individual face by face, internally. Then manually stich to identify any errors & patch accordingly.
Note these parts have 100's of faces so the code would be useful - not sure how to always offset the surface to the inside of the volume.
View 2 Replies
View Related
Apr 18, 2012
I'm trying to create a model of a Golf club head. I need it to be hollow but I am unable to do this using the shell operation or by creating a surface and thickening the faces. I created the geometry by lofting a series of sketches. I think the nature of the geometry may be causing the problem.
View 1 Replies
View Related
Jul 31, 2013
I am having trouble shelling a part I have designed. Every time I try, with no matter what thickness, I get the following message:
"The attempted shell operation had non-manifold inputs. Try with manifold inputs."
View 2 Replies
View Related
Oct 18, 2011
what could be causing all of my add-ins to spontaneously unload themselves? For the second time in a week, I opened Inventor to have all of my add ins unloaded, and the "Load at Startup" and "Loaded/Unloaded" checkboxes are unchecked. I am not doing this and I am the only user on this machine. System stats and version below.
[URL]
View 4 Replies
View Related
Jan 17, 2012
I'm trying to create a solid using the inside geometry of a shell in Inventor 2011. is there a simple way of doing this? i have attached the part i'm working on and need a solid that represents the free space inside the shell.
View 2 Replies
View Related
Jul 9, 2012
The issue I have with Inventor 2010 is when i dimension a rectangle to be 44 in wide and 79 in height it becomes a slated rectangle. This event occurs on the work version of Inventor 2010. I have an educational version of Inventor 2010 at home and when I tried this same dimension rectangle at home it didn't have this issue. Is there a setting I need to turn off to fix this.
View 1 Replies
View Related
Apr 22, 2009
I'm creating a macro to run on creation of a new assembly from a particular template. I created a macro named autonew in the template's VBA project file. It works great except for one thing: if the user presses "Cancel" on my form, I want to not only unload the form but also close the file. For this case I've used:
ThisApplication.ActiveDocument.Close True
I've created a test template assembly with only this line in autonew, and it crashes Inventor. The same line of code an a non-autonew module within the template file's VBA project closes the document without error or crashing. I assume this is a bug and not as designed.
Is this a bad way to accomplish the task of closing a newly created assembly? Even if this isn't the preferred approach, I don't think this should cause a crash.
I'm running Inventor 2009 SP1.
I'm running 64 bit on XP64
View 5 Replies
View Related
Oct 4, 2013
I have drawn an assembly of parts and now wish to line up the small hole in the large shell to the projecting pipe,i thought it would be a simple task of using mates (insert aligned) but this does not let me pick on the boundary of the small hole.
View 3 Replies
View Related
Apr 12, 2012
For a while now, I've been trying to shell a split game controller that will create the bottom part of the casing. However, every time I try to shell, a problem occurs "Modelling failure in ASM. Redefine inputs".
I've tried to find the source of the problem through supressing features, and when it finally does shell, the casing creates another problem that will not allow me to loft to get the proper appearance.
View 2 Replies
View Related
Sep 4, 2012
i managed to download and install autodesk inventor 2013, licensing is ok, i can start the program and look at some tutorial videos, but as soon as i try to draw anything the program freezes and my whole computer seizes, i tried to install the update but program still freezes, what can be the reason for this?
my computer is in the lower range performance wise, intel core 2 duo processor(1.83GHz) 3GB DDR2 ram but autocad 2010 ran fine on the same computer
View 3 Replies
View Related
Oct 16, 2012
Working with inventor pro 2012, whenever I try to run a macro, the program freezes. It happens when I press the tools/macros buttonand it can take 30 sec or more before the macros dialog release and active or I can try to run windows job list which seems to release the jam too.It also happens when I try to run my macro with shortcut key or customized button. It freezes before the macro even loads. If I open the macros editor and run the macro from there (run sub) then there is no delay at all!
Autodesk Inventor 2012 SP1 64-bit, win 7
View 1 Replies
View Related
Oct 16, 2012
Working with inventor pro 2012, whenever I try to run a macro, the program freezes. It happens when I press the tools/macros button and it can take 30 sec or more before the macros dialog release and active or I can try to run windows job list which seems to release the jam too. It also happens when I try to run my macro with shortcut key or customized button. It freezes before the macro even loads and it is very frustrating. If I open the macros editor and run the macro from there (run sub) then there is no delay at all!
Autodesk Inventor 2012 SP1 64-bit, win 7
View 9 Replies
View Related
