Using the shell feature. I have used a bit in the past and its always done what I want. This go around what I want is to shell without removing any outside walls, which it does no matter I seem to try. I can easily add a new outter wall back in, but if I can shell without removing an outter wall it would be just that much cleaner in my tree.
View 5 RepliesHow can i shell out the part with 2mm thickness walls?
View 1 Replies View RelatedI am trying to shell out the underside handle of the feature. I have attached my part file along with the assignment briefing file. It is the second part on the page, i.e. the Garlic Press Handle.
View 2 Replies View RelatedI'm not exactly sure how to verbalize this task, but I'd like to shell a solid by selecting 2 opposing faces amd maintain a center wall. Can this be done using only the shell feature?
Notice the solid below is hollow.
Having problem with a particular file crash/freeze/not respond whenever using the shell feature on Inventor LT 2013? I am operating with Windows 7. I have the AutoCAD Inventor LT 2013 Suite. Just bought the computer two weeks ago and just installed Inventor about two weeks ago also.
In any case, it seems the file of this model is corrupted, as I have never had a problem using the Shell feature before this and shelling other objects even while the corrupted part is open works fine. However, if the "visibilty" of the part in question is checked and i click on the shell button, the program immediately freezes. I am not sure how to work around this and I really do not want to start the entire part modeling over from scratch.
Working with... Autodesk: AutoCAD Inventor LT Suite 2013 | OS: Windows 7 | GC: ATI 6670 | Mem: 8 gigs RAM | Proc: Intel core i5 | Monitor: Acer V213HL
How I can disable Corel PaintShop Pro X5's Windows Explorer shell extensions?
View 2 Replies View RelatedI work with a colleague who is running AutoCAD MAP. When he makes a block or saves a drawing, at the origin is a 3D, downward pointing arrow which in 2D plan view obscures anything around the origin. I open his blocks or drawings in ACAD2012 or 2013 with the same issue. In plan view, the 3d arrow appears as a circle with radial lines running out from the center. If I save the drawing in my ACAD that feature is still there.
I've attached a png screenshot of what I'm talking about.
Is there any way to get rid of that feature, which is apparently coming from his MAP version of ACAD? I've looked for settings on his machine and on mine. I have played with the Workspace setting. I've looked in Options for anything. Maybe there is a system variable. How to control the visibility of this 3D arrow in ACAD?
I need to shell out a Loft in the attached IV 2012 part file.The Loft i tried also as a new solid but the shell also cuts into the cylinder ( revolution 1 ) . I only want the 2 sides and bottom of the Loft to be Shelled, not the cylinder. What do i need to change to get the shell to work?
View 4 Replies View RelatedIs it possible to fill a shell with sand? The end use of my design will have sand - like in a childs plasitc basketball hoop/stand assembly and I would like to try to approximate the center of gravity and other useful info.
ACAD 2010
ACADE 2008
AIS 2009
Whats the importance of "Shell Connector Tolerance"in the create new simulation dialog box. Any example or some kind of illustration to explain this.
C1
Inventor Professional 2013
Vault Collaboration 2013
When trying to shell a part i get the error: the attempted shell operation was unable to solve for a vertex....etc. i have attached the problem part file, of which the drawing is a fairly complicated frame (a chassis concept for a 3 wheeled race car i am designing)
How the part was made:It was created in an assembly using the frame generator tool and then converted to part file using the shrinkwrap feature. When using the shrinkwrap command, i selected: single solid body merging out seams between planar faces, All hole patching, break link, and remove all internal voids. and then when trying to shell i get the error message when selecting a wall thickness of 2mm.
i cant understand why the shell feature does not work as i have successfully shelled a very similar part file (with only slight differences in geometry from the file attached in the same way as what i am trying to do with this part). i can provide this part file upon request or the assembly file from which either was created. i need to shell the component in this way so that i can run accurate FEA (stress analysis) for crash simulations on it
I am using inventor 2013 (64bit OS)
I am trying to make a shell of a mesh feature after I have upscaled it.
I do not think the regular shell technique will work as my mesh feature has hundreds of surfaces. So, I decided to open the file with my part in it and then derive the same part but a little bigger using the derive button. I would then subtract out the smaller, original, one to make a shell of the bigger, derived one.
Unfortunately, when I use this method to upscale, the 2 objects are not concentric so I cannot make the uniform shell that I want to.
I have attached the file of my mesh feature in case you want to see it. not that you will have to convert the object you see on my file into a base feature before doing anything with it. I did not because it would have made the file to big to attach.
I have a funnel with a curved top. I'm trying to project an inset of the border onto the curved surface and use the shell command to create a hollow funnel with an overhanging lip. I have projected the inset successfully, but cannot select the resulting smaller face, just the whole original face.
A similar problem that I tried while attempting to figure this out was shelling a sphere. 2d sketch -> 3d sketch project onto surface, and try applying shell to the resulting "face". However I can only select the whole face when trying to shell.
This shape will not shell out with a 3mm thickness.....i suspect i may have not modelled correctly....how would you model this shape part so as it can be shelled out?
View 8 Replies View RelatedIs there a way to use the Split Solid tool to partially split a circle and have multiple solids after.
Ex) I would like to cut the tank at the 180 and 270 deg marks. Using the split tool still cuts through 0 and 90. I tried drawing a line from a top view that started from center going through 180, but it still goes through 0 as well.
I've attached an example shell of where I would like to have 6 solids after.
I would like to be able to the share external geometry of a fully assembled mechanical model without surrendering any part or assembly data. Is there a way to turn this assembly into an external surface "shell"…?
View 1 Replies View RelatedHow to create a oval shape.The attached file shows the shape i need.How do i make the shape and then shell out 2mm.
View 2 Replies View RelatedSee Shell 2 .. it shells out but how do i have the Shell to the curved face on Revolution 1.I want the Shell to cut through Extrusion 1 and to the Revolution 1 curved face.
View 9 Replies View RelatedI have an assignment to draw a bathroom. I have walls that are spaced 3 5/8 inches apart and the drawing shows insulation batting between them. When I use the batting insulation linetype and run a line between the walls the batting symbol extends beyond the 3 5/8 inch walls. how do I get it to fit between?
View 9 Replies View RelatedI have a blade housing that requires a continuos radius around the profile. It is not a full radius. When I shell the blade, it looks like the raidius wants to continue. I was told I had to use two fillets and the particial radius will not work. However, the continuous radious in the customers requirement. Is there a way to shell this part correctly?
View 2 Replies View RelatedThe problem: a complex curvy part will shell 0.5 mm but not 3mm - some of the surfaces fall inside the others.
A work around : Offset each surace (individually - not quilt) then stich & sculpt.
A program: To offset an enclosed surface, individual face by face, internally. Then manually stich to identify any errors & patch accordingly.
Note these parts have 100's of faces so the code would be useful - not sure how to always offset the surface to the inside of the volume.
I'm trying to create a model of a Golf club head. I need it to be hollow but I am unable to do this using the shell operation or by creating a surface and thickening the faces. I created the geometry by lofting a series of sketches. I think the nature of the geometry may be causing the problem.
View 1 Replies View RelatedI am having trouble shelling a part I have designed. Every time I try, with no matter what thickness, I get the following message:
"The attempted shell operation had non-manifold inputs. Try with manifold inputs."
how can i draw this plan without knowing the angles for each wall? when i draw , the last wall is incorrect can autocad adjust the angles of walls for me after typing the length of the walls ?
DEST2109.jpg
I created a new wall type that includes Stud, Sheathing, and Rigid Insulation. I need to show the existing CMU walls cutting through the new Stud walls. Can this be done?
View 3 Replies View RelatedI'm trying to create a solid using the inside geometry of a shell in Inventor 2011. is there a simple way of doing this? i have attached the part i'm working on and need a solid that represents the free space inside the shell.
View 2 Replies View RelatedI have drawn an assembly of parts and now wish to line up the small hole in the large shell to the projecting pipe,i thought it would be a simple task of using mates (insert aligned) but this does not let me pick on the boundary of the small hole.
View 3 Replies View RelatedFor a while now, I've been trying to shell a split game controller that will create the bottom part of the casing. However, every time I try to shell, a problem occurs "Modelling failure in ASM. Redefine inputs".
I've tried to find the source of the problem through supressing features, and when it finally does shell, the casing creates another problem that will not allow me to loft to get the proper appearance.
I want to turn my in-place mass walls (sloped or helical) to structural walls but i don't know how to do it. I'm able to do the walls but when i switch it to the analytical view the wall doesn't appear because it's not structural. It's there a way to do in-place mass structural walls.
View 1 Replies View RelatedI have been working with some GIS data in the form of SHP files in autocad map 3D 2011. On one of my layers I have started getting "Feature was not saved in the target feature source" when I try to check in my data. In total there are 308 errors in the data table, all of which were features I deleted. They all have a featID of null and I cannot remove them from the data table. I need to fix these errors without going back and starting over.
View 4 Replies View RelatedI am running Autodesk Map3D 2012 and I need to label my feature points no matter if they overlap or not.The Map3D documention refers to a check box that will allow what I believe I need- but I cannot find the checkbox in the style editor. Here's a clip from the Autocad documentation:
To allow labels to obscure points on the selected layer..In the Display Manager , select the point layer. Click the Style button.In the Style Editor, click Allow Other Labels To Obscure Feature Symbols On This Layer.