AutoCAD Inventor :: How To Draw A Spiral Garden Hose
Jun 11, 2012How would you draw a spiral garden hose? If you don't know what i mean by spiral garden hose Google it. How would you draw the hose.
And would it be possible to make it flexible?
ADVERTISEMENT
AutoCAD Inventor :: Draw Spiral Bevel Gears System
Mar 30, 2012I'm trying to draw a spiral bevel gears system KLINGELNBERG , but the results do not match the actual measurements of the piece.
ex. measure of the real outside diameter of the gear = 356mm
DATA :
number of teeth pinion = 9
number of teeth gear = 44
module = 5
shaft angle = 90 °
face width = 59mm
helix angle = 35 °
pressure angle = 20 °
AutoCAD Inventor :: How To Get Two Different Sizes Of Hose
Dec 4, 2012I'm putting flexible hoses in an assembly and need to use a few different sizes. So I create run1 and set the hose to be 1/2" hose. Then I create a run2 and change the hose size to 1/4" but it also changes the size of the hose in run1. Is this supposed to happen? How can I get two different sizes of hose?
I've just been going down to the sweep feature which makes the hose and adding dimensions to the ID and OD so I can control the size. This is a pain and doesn't seem like what should need to be done. Is there a way to have different hose runs be different sized hose?
AutoCAD Inventor :: Hose Fitting Authoring
Jan 10, 2012I downloaded a hose fitting ipt file from the Parker website and did the Tube and Pipe Authoring thing to put it into the content center as a new family in a new read/write library. When I browse for it to use as the Start Fitting on my hose, the new family does not appear in the list. What is my problem?
The new library is checked in my Projects configuration. I have been monkeying with the NS column of the family and can't seem to get it back to its original format now.
AutoCAD Inventor :: Convoluted Flexible Tube / Hose
Dec 4, 2005I need to model up a convoluted flexible hose as a component part for use in an assembly. What is the best approach to creating this with a realistic and natural look?
View 9 Replies View RelatedAutoCAD Inventor :: Making Custom Sized Flexible Hose
Jul 30, 2013I need to make a 1/8" diameter flexible hose, but the sizes listed for the Parker Hydraulic Hose only go down to 1/4". The closest solution I could find is here:
[URL]........
Here is what I did:
In my assembly, click "Place From Content Center"
Find "Parker Hydraulic Hose"
When I right click on it, the only selection is "Add to Favorites"
Double click on "Parker Hydraulic Hose"
Go to "Table View" tab
Right click on a row, but there is no "Input" selection.
AutoCAD Inventor :: How To Reconnect Hose To Fitting In Tube And Pipe
Nov 11, 2011I had a hydraulic hose connected to an elbow fitting and now it has been changed a straight fitting.
What is the proper way to do this so that it is still adaptive?
And how can I reconnect the hose to the new fitting and have it adaptive?
AutoCAD Inventor :: Increasing Hydraulic Hose Size Beyond Standard 2" (max)
Feb 1, 2013How can i increase the size of the hose beyond 2" max that Pipe&Run allows it to be? I need the hose more for a visual rather then its acual function. I'm guessing i gonna have to change its paremeters right? if so, how do i and what needs changed?
View 1 Replies View RelatedAutoCAD Inventor :: How To Flatten A Spiral
Jul 18, 2013I'm trying to flatten a section of sheet metal so i can get a cut lenth for my fab shop. Please see attached drawing. I want to use these dimensions, and then flatten the part so my fab shop can trace it and cut the sections, bend them and weld together, but when i use the flatten command, nothing happens..
View 7 Replies View RelatedAutoCAD Inventor :: Variable Spiral Thickness
Oct 20, 2011Is there a way to use the coil command to make a spiral out of a rectangle where the thickness of the rectangle starts at one value and ends at another? This would be a spiral torsion spring with decreasing thickness approaching the center.
View 5 Replies View RelatedAutoCAD Inventor :: Spiral Pattern For A Feature?
Nov 21, 2012I have a tube which I'm adding a pocket to the outside by removing some material. I then need to array that around the tube. However I need to offset each pocket along the length of the tube. I've attached the tube with one pocket (v2013) and a picture showing the pattern if the surface of the tube was unwraped.
View 2 Replies View RelatedAutoCAD Inventor :: How To Make Spiral Array
Jan 21, 2012how to make spiral array? I am to model ballscrew and would like to put ball in. To do so I would need something like spiral array.
View 8 Replies View RelatedAutoCAD Inventor :: 2D Equation Curve For A Parabolic Spiral
Jun 22, 2013what the 2D or 3D equation curve for a parabolic spiral, otherwise known as a Fermat's spiral would be? I have found this info but do not know how to apply it:
Fermat equation
Therefore in terms of the affine plane its equation is
The Fermat curve is non-singular and has genus
I have also found this: $r^{2}=a^{2} heta $
Please see image attached.
AutoCAD Inventor :: Developing Spiral Flower Step?
Dec 12, 2011need to develop the Inventor part based on the autocad drawing. Its a spiral flower step for kids playground.
View 5 Replies View RelatedAutoCAD Inventor :: Drawing Logarithmic Spiral / Projecting On A Sphere
Sep 19, 2011I need a path on a sphere like on the image I attached (sphere_spiral) for the result similar to image called "gomb". The only problem, metric spiral or coil / 3d helical curve path won't work because it doesn't end the result I need, because the lines are converging each other. So, I figured out I need a logarithmic spiral 2D sketch or maybe a sinusoidal path.
I need a path from the sphere's top center point to the bottom center point, projected to its surface with equal distance of lines.
AutoCAD Inventor :: Flatten Failure Of Sheet Metal Spiral
Dec 27, 2013why this spiral will not flatten properly.
View 2 Replies View RelatedAutoCAD Inventor :: Creating Flat Pattern Of A Coil / Spiral Shape?
Sep 25, 2012Is there a way to unfold a coil shape to get the flat pattern? When I try to unfold the attached part I get an error message (see attached error_msg.jpg). We have been using AutoPOL to unfold these kind of shapes (which works fine). But since we have a very old version which we really need to upgrade, I was wondering if nowadays Inventor could handle coil unfolds.
If this will not work with the current IV2013 release, will this then be implemented in a future release? Are there any alternatives or should I just go for the AutoPOL upgrade?
IV2013 Pro SP1
AutoCAD Inventor :: Making Spiral Shaped Pattern Of Parts Around Axle
Feb 28, 2013It is all about making a spiral shaped pattern of parts around an axle.
what I found in a topic is:
1.Make pattern of workpoints in part file.
2.Make pattern of components in assembly file to follow part pattern.
1st part is easy and done with coil and pattern within the ipt
2nd part does not let me select the workpoints as feature pattern.
CorelDRAW X4 :: Garden Design Using Set Of Objects
Jun 2, 2011Producing a set of objects that can be used to design a garden? Having just bought some land to extend my garden, I'd like to visualize various layouts and plantings - I would love to be able to design it all in CorelDraw ( pre-drawn plants, trees, fencing, etc) -
View 2 Replies View RelatedPhotoshop :: Olive Garden Logo
Dec 12, 2005It's clear that the shadows are done in post... but, do you think this was created procedually in photoshop, or just painted.. straight up?
View 9 Replies View RelatedAutoCAD 2010 :: How To Create Flexible Hose
Aug 4, 2012I am trying to create a flexiable hose, i dont want it to move or anything. I have tried to sweep a circle along the path, but my pline is not on a coplanar line so that makes it difficult. tried using extrude. tried using a helix but can't get the right angles.
View 9 Replies View RelatedAutoCAD 2010 :: Hose With Fixed Length
Mar 8, 2012If it is possible to set a fixed length to a "Hose" hanging from one point to another? So that when hang-off point's are adjusted (any direction) the hose act pursuant to the fixed length.
View 9 Replies View RelatedRevit :: Sidewalk / Garden Paths In Arch
Jan 24, 2012I just did a competition that required a garden. Lacking time to fully research Revit options, I ended up creating a topo and cutting paths into it by using building pads for the paths, requiring a lot of tinkering with the topo elevations. This was far from ideal because I wanted to alter things later, but it was just too labor intensive to do that and I ran out of time.
Any (cheap!) program that would work well for this? Something that could export a file that could be linked into Revit?
It would be very nice if a version of "building pad" could be created by Autodesk that would work as a sidewalk/path and that could also have a slope.
Another problem with this was that I had to position all the topo points along the path wall borders at a low elevation because the topo "bled" into the walls as it sloped up from them. Another great thing would be if Revit sidewalk pads could have borders that also "cut" topo.
AutoCad :: Creating A Spiral Slide
Oct 19, 2011You see, one of the slides needs to be a spiral type. It has to be 175 (units-in my case cm) tall and 60 (units) ride so the bigger kids can slide down no problem.
My problem is making the 2D (and thus 3D) image. I'm not to sure how to go about this. I've tried doing the HELIX command but it's seemingly impossible to match up the two spirals to create the constant width and even create the slide.
AutoCad 3D :: How To Make Array In Spiral
Oct 19, 2011How to make an array in a spiral?
Without first arraying down, then polar, then deleting the extras?
AutoCad 3D :: How To Create 3D Spiral Shape
Aug 4, 2012Why I can not sweep this circle along this shape
the error is: unable to sweep 1 selected object
Actually I'm trying to create a 3D spiral shape
AutoCad 3D :: Drawing Spiral Staircase
May 10, 2012I m trying to draw some stairs but really struggling in even finding a place to start. Basically I have a large cylinder which an access platform, I need to put some stairs to it as per the as fitted drawing which is lacking in info to say the least. I know the diameter of the tank, and the length of the stairs as the leave the platfor to the ground. I also know the floor elevation height, just not got a clue where to start.
Forgot to mention the angine of the spiral staircase in 40degrees.
AutoCad 3D :: How To Slice Spiral Stair As Per Section
Sep 29, 2013slice the spiral stair as per the section.
test.dwg
AutoCad 3D :: Change 2D Spiral Column Into 3D Solid?
Oct 1, 2011I attached a draw of a spiral column that I 'd like to make into a 3D solid.
View 9 Replies View RelatedAutoCad 3D :: Make 3D Spiral Stair Stringer
Jan 21, 2008How do i make a spiral stair stringer in 3d? what commands do i use?
View 9 Replies View RelatedAutoCAD Inventor :: Computer Freeze When Trying To Draw Something?
Sep 4, 2012i managed to download and install autodesk inventor 2013, licensing is ok, i can start the program and look at some tutorial videos, but as soon as i try to draw anything the program freezes and my whole computer seizes, i tried to install the update but program still freezes, what can be the reason for this?
my computer is in the lower range performance wise, intel core 2 duo processor(1.83GHz) 3GB DDR2 ram but autocad 2010 ran fine on the same computer