AutoCAD Inventor :: Developing Spiral Flower Step?
Dec 12, 2011need to develop the Inventor part based on the autocad drawing. Its a spiral flower step for kids playground.
View 5 Replies
ADVERTISEMENT
Photoshop :: Creating Flower Pot And Flower From Portraits / Faces
Mar 27, 2012I am working on a project in which I need to take over 300 faces and transform them into a white flowerpot with a flower in it.
View 4 Replies View RelatedAutoCAD Inventor :: Developing Parametric Spreadsheets To Drive Modelling
Aug 7, 2013We are a transport engineering firm in Queensland and I would like to develop a spreadsheet that can formulate cross member distances and recalculate to add or remove cross members.
The basis of this is the overall size of the body we are building.
For example: The maximum width of a body in Australia is 2.5metres overall. Our cross members would be 6 mm shorter than the overall width of the body to allow for 3mm end caps to cover the open ends of the cross members. So the length of the cross member is width minus 6, or , parametrically the length is (overall width - (endcap thickness x2))
The body length is the tricky one. We have a maximum spacing on the cross members. This will vary from size of body to size of body. EG the spacing on the small 2 tonne body will be different to the spacing on the 12 tonne body etc. So lets say we want to have maximum spacing of 450mm and a minimu spacing of 300mm between centrelines of the cross members. The overall length of the body will also determine the number of cross members required.
On top of this there is the front and rear coaming to take into consideration.
So the formula would be ((overall length - front coaming - rear coaming) divided by cross member spacing)) then a check to see if the last space is what and then can we change the cross member size to take up that space without going over the maximum space. We would also need to take into account the width of the cross member section as well in this calculation.
EG if we have 150mm left at the end we could increase the cross member centres slightly to take up this additional space without going over the maximum space allowable.
AutoCAD .NET :: Undo Transactions Step-by-step Within Command Method
Sep 26, 2013I have a Command Method which has a loop that opens and commits transactions until the user is finished with it and exits.
I would like each transaction to be undone separately but the undo command undoes the CommandMethod (along with all the transactions that occurred while in the loop)
Do I need to use the COM StartUndoMark and EndUndoMark to get this working?
AutoCAD Inventor :: How To Flatten A Spiral
Jul 18, 2013I'm trying to flatten a section of sheet metal so i can get a cut lenth for my fab shop. Please see attached drawing. I want to use these dimensions, and then flatten the part so my fab shop can trace it and cut the sections, bend them and weld together, but when i use the flatten command, nothing happens..
View 7 Replies View RelatedAutoCAD Inventor :: Variable Spiral Thickness
Oct 20, 2011Is there a way to use the coil command to make a spiral out of a rectangle where the thickness of the rectangle starts at one value and ends at another? This would be a spiral torsion spring with decreasing thickness approaching the center.
View 5 Replies View RelatedAutoCAD Inventor :: Spiral Pattern For A Feature?
Nov 21, 2012I have a tube which I'm adding a pocket to the outside by removing some material. I then need to array that around the tube. However I need to offset each pocket along the length of the tube. I've attached the tube with one pocket (v2013) and a picture showing the pattern if the surface of the tube was unwraped.
View 2 Replies View RelatedAutoCAD Inventor :: How To Make Spiral Array
Jan 21, 2012how to make spiral array? I am to model ballscrew and would like to put ball in. To do so I would need something like spiral array.
View 8 Replies View RelatedAutoCAD Inventor :: How To Draw A Spiral Garden Hose
Jun 11, 2012How would you draw a spiral garden hose? If you don't know what i mean by spiral garden hose Google it. How would you draw the hose.
And would it be possible to make it flexible?
AutoCAD Inventor :: 2D Equation Curve For A Parabolic Spiral
Jun 22, 2013what the 2D or 3D equation curve for a parabolic spiral, otherwise known as a Fermat's spiral would be? I have found this info but do not know how to apply it:
Fermat equation
Therefore in terms of the affine plane its equation is
The Fermat curve is non-singular and has genus
I have also found this: $r^{2}=a^{2} heta $
Please see image attached.
AutoCAD Inventor :: Developing Casting Models Into Machining Models
Oct 6, 2011We are looking for a workflow example of developing casting models into machining models.
Typically our castings are made from different materials (Fig-1) and then machining (Fig-2) are created from these castings.
Is creating the casting as an iPart (with different materials) and then deriving the machining from the casting the proper method?
Doing it this way seems to force us into making a machining for each casting material instead of just one machining that is an iPart. How should this be set-up for BOM purposes and for use with Vault (Base Version)?
AutoCAD Inventor :: Drawing Logarithmic Spiral / Projecting On A Sphere
Sep 19, 2011I need a path on a sphere like on the image I attached (sphere_spiral) for the result similar to image called "gomb". The only problem, metric spiral or coil / 3d helical curve path won't work because it doesn't end the result I need, because the lines are converging each other. So, I figured out I need a logarithmic spiral 2D sketch or maybe a sinusoidal path.
I need a path from the sphere's top center point to the bottom center point, projected to its surface with equal distance of lines.
AutoCAD Inventor :: Flatten Failure Of Sheet Metal Spiral
Dec 27, 2013why this spiral will not flatten properly.
View 2 Replies View RelatedAutoCAD Inventor :: Draw Spiral Bevel Gears System
Mar 30, 2012I'm trying to draw a spiral bevel gears system KLINGELNBERG , but the results do not match the actual measurements of the piece.
ex. measure of the real outside diameter of the gear = 356mm
DATA :
number of teeth pinion = 9
number of teeth gear = 44
module = 5
shaft angle = 90 °
face width = 59mm
helix angle = 35 °
pressure angle = 20 °
AutoCAD Inventor :: Creating Flat Pattern Of A Coil / Spiral Shape?
Sep 25, 2012Is there a way to unfold a coil shape to get the flat pattern? When I try to unfold the attached part I get an error message (see attached error_msg.jpg). We have been using AutoPOL to unfold these kind of shapes (which works fine). But since we have a very old version which we really need to upgrade, I was wondering if nowadays Inventor could handle coil unfolds.
If this will not work with the current IV2013 release, will this then be implemented in a future release? Are there any alternatives or should I just go for the AutoPOL upgrade?
IV2013 Pro SP1
AutoCAD Inventor :: Making Spiral Shaped Pattern Of Parts Around Axle
Feb 28, 2013It is all about making a spiral shaped pattern of parts around an axle.
what I found in a topic is:
1.Make pattern of workpoints in part file.
2.Make pattern of components in assembly file to follow part pattern.
1st part is easy and done with coil and pattern within the ipt
2nd part does not let me select the workpoints as feature pattern.
Photoshop Elements :: Step By Step Process For Doing Layer Masks?
Feb 22, 2013I have somehow reversed the process of changing a sky in my photo so that when I get to the point of painting in the sky from the 2nd photo, it is painting with white (not black) that brings out the background I want on the original photo. Where have I gone wrong? Is there anywhere I can go to find a detailed step-by-step process for doing Layer Masks?
View 1 Replies View RelatedAutoCAD Inventor :: Export IAM To STEP / STP Or IGES
Sep 5, 2012How do i export a .iam to STEP or STP or IGES without the three being expordted? i dont want the costumers to be able to see the anything in the three but 1 file (base1 or something).
What i do today is, i make a new part and derive the .iam file and then export it to step but this is getting hard to do when you have many .iam files.
AutoCAD Inventor :: Templates For Step Translation
Oct 27, 2011We have a minor issue with STEP translations. We keep our templates on the network, and they have a lot of customized settings. Everything is fine until we try to translate a STEP file, then Inventor wants to use the templates on the "C" drive (the ones that came with the software).
Is there a setting I can use to make Inventor use the templates on the network? I've got my "Files" setting in the "Options" pointing to the templates on the network, but Inventor still uses the ones on the "C" drive.
AutoCAD Inventor :: Can STEP Files Still Be Used In Assembly
Sep 3, 2012Basically, my school has the 2012 version of Inventor while I have 2013, and I was wondering if I can still use STEP files in an assembly, and also in my drawing sheets.
View 9 Replies View RelatedAutoCAD Inventor :: Step File Converted To IPT
Aug 16, 2013Following is possible using AutoDesk Inventor Apprentice (C++ Project)?
I want to be able to select (using the File Open dialog box) a "Step" file that I have downloaded from my supplier, then convert it to an IPT file (NOT AN ASSEMBLY!!!), automatically.
AutoCAD Inventor :: Convert STEP Model To IPT
Nov 19, 2012I followed up their way as URL....but still I cannot get correct solid model when I try to convert attached STEP model to IPT. I just can get surface model, but I do not solid one.
View 3 Replies View RelatedAutoCAD Inventor :: Converting Step Format
Apr 11, 2013Convert file in STEP format do Inventor? I need to have box but it imports only as surfaces. When I want to stitch these surfaces an error appears that says that I have crossed surfaces.
View 8 Replies View RelatedAutoCAD Inventor :: Making STEP From Max File
Mar 4, 2013For a client we maked a model in 3dsmax. But now they have to produce it in the factory. They need a STEP file. I added the file in Inventor. But its not a solid 3d body. But I have never worked with this program. How to make the STEP file? URL...
View 3 Replies View RelatedAutoCAD Inventor :: Exporting STEP With Threads?
Oct 6, 2011I have made threads with the standard thread tool (that doesn't seem to make 3D threads but instead pictures of threads) into solid and once I export the STEP file and open it in Solidworks the threads are missing. I have to export the drawing to STEP for machinist that uses Solidworks. How can I include the threads into STEP file?
View 3 Replies View RelatedAutoCAD Inventor :: Step File Import
Nov 6, 2012Im importing .stp files and only want to imort the surfaces, but some files have to have the solid imported as well. Why the file is like this?
View 4 Replies View RelatedAutoCAD Inventor :: Exporting To Step Files?
Nov 5, 2013I can use the program and quite happily create components, sub assemblys, and master assemblys.Our company still doesn't have ANY 3D FILES. I have been tasked with eventually creating a full range of end product drawings as Step files. They are wanting BIMS. I see this a step to far atm.....
With the products that manufacture inhouse (industrial / comercial boilers) I have produced each individual component within the boiler to eventually aid to manufacture and bombs to intergrate with SAP.
With doing this every boiler I have done in inventor all the components are there and easily accessable. Am I right in thinking it needs to be exported as a step file to lock everything within the master assembly.
When I have exported it to a step file, when it comes to importing it into an assembly file the components are still accessable when expanded in the menu at the side. Is this because im opening it on my computer or have I done something wrong.....
AutoCAD Inventor :: Convert DWF File To STEP?
Jan 8, 2013We had a CAD designer create a 3D drawing for us. I am pretty sure he did it in Inventor. We only have Inventor LT here. I am so lost its not even funny and my boss is breathing down my back to get this done. How in the heck do I convert the .dw file to a .step or .iges file!?
View 1 Replies View RelatedAutoCAD Inventor :: 2013 - Export DWG To STEP?
Sep 4, 2013I am trying to export a dwg to STEP in inventor 2013.
The exprort to STEP tab is greyed out and can't be clicked on.
Photoshop :: Step Backward And Step Forward
Dec 18, 2008I have CTR-Z mapped to step backward.
Using two different shortcuts for "undo" (one step back) and "Step Backward" (Multiple steps back) makes no sense to me. As such, I rarely use the regular undo, and do not have it mapped.
The case:
When I switch to a new layer, do a brush stroke and undo it, photoshop treats my undo as a switch back to the layer I came from. This happens a LOT, and not just to me, but to a lot of designers I know (I'm a GUI designer at a game company). Some of them have even formed a habit of "erasing" a bit in an empty part of the layer, just in case the'd later want to undo. That's bad.
My proposed solution:
-First undo my stroke, Leave my selected layer alone.
-On a NEXT press of "Step backward" change my current layer to the one I came from.
AutoCAD Inventor :: Importing Step Files Into Assemblies
Feb 5, 2013I am trying to import a step assembly file in 2013. Under the options settings I no longer have or see the ability to,
(Import Multiple Solids Parts as Assembly) This was an option to check.
This seems to be a big issue as we always import the assemblies, then ground them. And this gives us the option of moving or deleting certain components, as well as opening individual components in their own part environment.