Convert file in STEP format do Inventor? I need to have box but it imports only as surfaces. When I want to stitch these surfaces an error appears that says that I have crossed surfaces.
View 8 RepliesI have to send one of my assemblies to a customer who has Solidworks I believe, so I thought I would just save the assembly as a step file, but when I try to do this it crashes my system probably due to the fact that I have quite a bit of embossing on one particular panel. Any other options?
View 4 Replies View RelatedI am working with Inventor Professional 2012 eduactional institution version here at school. I am trying to conver a DWG of a 747 to a IGES or STEP file, but when I go to do so the option export "cad format" is faded out and I cannot choose it. Is this b/c it is an educational version, or am I missing something?
View 6 Replies View RelatedI have a problem with some step files I recieved from a vendor for an assembly. Basically what is happening is I download the step file. Then bring it into Mechanical Desktop. When brought into Mechanical desktop, it is downloaded in metric where my entire assembly is in standard/english format. What I did when I had Inventor 2011 is bring the step file into inventor, go to document settings and switch the unit to inch from mm. Then save the step file and when I brought it into Mechanical desktop it was in the correct unit and scale.
Now with 2012 Inventor, when I bring the step file in, it is automatically in english/standard format. So I save the step file out and try to open it in Mechanical desktop only to have the file back into mm and 25.4x the actual size it should be.
how to save the step file out like in 2011 to make sure the unit is saved in the correct format. This is extremely aggrevating and waste of time. I would have had the part reverse engineered by now if i quit trying to use the vendors standard step files.
This problem doesn't only happen with a certain vendor's drawings either, it goes for all step files I have recieved since getting Inventor2012.
I have a folder with a couple of files that i need to save a copy as STEP format, right now they are in CATIA, is it possible to save them all at once? or I will have to open one by one and save it?
View 1 Replies View RelatedI would convert my files .max to a standard CAD format .step or .model
View 1 Replies View RelatedI have a Command Method which has a loop that opens and commits transactions until the user is finished with it and exits.
I would like each transaction to be undone separately but the undo command undoes the CommandMethod (along with all the transactions that occurred while in the loop)
Do I need to use the COM StartUndoMark and EndUndoMark to get this working?
I had recently upgraded to LR 4 and 4.1.Later my (5 year old) computer quit working for various reasons and I replaced it with a new one.In order to get LR running again, I reinstalled it and hooked up with my catalog with the old preview folders .Now, I realize that the default location for the catalog and previews is a Lightroom 4 folder and now a previews.db.
How can I get my working catalog converted to the LR 4 format and location.I do not remember LR 4 or 4.1 asking me if I wanted to convert and asking me where the old catalog was.Or, do I import the old catalog as <a catalog> ?
What is the best export/import format for sending 3D files. I need some neutral format files, possibly Solidworks but I am not sure. Also any export settings to make sure I get decent quality files.
Nothing like getting a surface model when you want solid model.
IV2014 sp1.2 PDSU / Sim Mech 2014 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 331.82
SpacePilot Pro 3.17.1, 6.17.7, 4.11
I have somehow reversed the process of changing a sky in my photo so that when I get to the point of painting in the sky from the 2nd photo, it is painting with white (not black) that brings out the background I want on the original photo. Where have I gone wrong? Is there anywhere I can go to find a detailed step-by-step process for doing Layer Masks?
View 1 Replies View RelatedIs there a way of converting a Photoshop file into a workable word file?
I dont want the photoshop file in word as a picture I have done that but I cannot work on the file in Word which I want to do.
I have got a number of photoshop files which i cannot use because i dont have Photoshop. So i downloaded the trail version of Photoshop (MacOSX) to convert them to something that i can use with other programs. What file format can i export them to?
I need a format that keeps all the information about the layers and all the other stuff - So i guess this is called workable file. What format does exist in Photoshop so that i can export it for later use with any other (means NON-Adobe) programm? URL....
How do I go about converting my CDX5 file to EPS8 format so that I can start submitting some of my work as vector stock to canstockphoto website?
View 2 Replies View RelatedI'm taking the time to edit some of my nicer/older outdoor photos that were taken in jpeg format in Photoshop CS3 and then on to printing with an Epson 3800. I've been told that files I want to print I should make sure that I'm set to an RGB color space (1998), get icc profiles for paper, have photoshop manage colors, etc.
This is all going great! However, I've recently read online that to truly show the full potential of one's photos, those jpeg's should be converted to a TIFF file format...especially when printing (I'm now taking everything in RAW format, but I still have to take care of some of these nicer jpeg's).
Have done several prints comparing same photo in jpeg & tiff and tiff definately is higher quality. Now..my questions concern some of the settings in CS3 when I chose 'Save As' - 'Format' = tiff. Code:
How do i export a .iam to STEP or STP or IGES without the three being expordted? i dont want the costumers to be able to see the anything in the three but 1 file (base1 or something).
What i do today is, i make a new part and derive the .iam file and then export it to step but this is getting hard to do when you have many .iam files.
We have a minor issue with STEP translations. We keep our templates on the network, and they have a lot of customized settings. Everything is fine until we try to translate a STEP file, then Inventor wants to use the templates on the "C" drive (the ones that came with the software).
Is there a setting I can use to make Inventor use the templates on the network? I've got my "Files" setting in the "Options" pointing to the templates on the network, but Inventor still uses the ones on the "C" drive.
Basically, my school has the 2012 version of Inventor while I have 2013, and I was wondering if I can still use STEP files in an assembly, and also in my drawing sheets.
View 9 Replies View RelatedFollowing is possible using AutoDesk Inventor Apprentice (C++ Project)?
I want to be able to select (using the File Open dialog box) a "Step" file that I have downloaded from my supplier, then convert it to an IPT file (NOT AN ASSEMBLY!!!), automatically.
I followed up their way as URL....but still I cannot get correct solid model when I try to convert attached STEP model to IPT. I just can get surface model, but I do not solid one.
View 3 Replies View RelatedFor a client we maked a model in 3dsmax. But now they have to produce it in the factory. They need a STEP file. I added the file in Inventor. But its not a solid 3d body. But I have never worked with this program. How to make the STEP file? URL...
View 3 Replies View RelatedI have made threads with the standard thread tool (that doesn't seem to make 3D threads but instead pictures of threads) into solid and once I export the STEP file and open it in Solidworks the threads are missing. I have to export the drawing to STEP for machinist that uses Solidworks. How can I include the threads into STEP file?
View 3 Replies View RelatedIm importing .stp files and only want to imort the surfaces, but some files have to have the solid imported as well. Why the file is like this?
View 4 Replies View RelatedI can use the program and quite happily create components, sub assemblys, and master assemblys.Our company still doesn't have ANY 3D FILES. I have been tasked with eventually creating a full range of end product drawings as Step files. They are wanting BIMS. I see this a step to far atm.....
With the products that manufacture inhouse (industrial / comercial boilers) I have produced each individual component within the boiler to eventually aid to manufacture and bombs to intergrate with SAP.
With doing this every boiler I have done in inventor all the components are there and easily accessable. Am I right in thinking it needs to be exported as a step file to lock everything within the master assembly.
When I have exported it to a step file, when it comes to importing it into an assembly file the components are still accessable when expanded in the menu at the side. Is this because im opening it on my computer or have I done something wrong.....
We had a CAD designer create a 3D drawing for us. I am pretty sure he did it in Inventor. We only have Inventor LT here. I am so lost its not even funny and my boss is breathing down my back to get this done. How in the heck do I convert the .dw file to a .step or .iges file!?
View 1 Replies View RelatedI am trying to export a dwg to STEP in inventor 2013.
The exprort to STEP tab is greyed out and can't be clicked on.
I have CTR-Z mapped to step backward.
Using two different shortcuts for "undo" (one step back) and "Step Backward" (Multiple steps back) makes no sense to me. As such, I rarely use the regular undo, and do not have it mapped.
The case:
When I switch to a new layer, do a brush stroke and undo it, photoshop treats my undo as a switch back to the layer I came from. This happens a LOT, and not just to me, but to a lot of designers I know (I'm a GUI designer at a game company). Some of them have even formed a habit of "erasing" a bit in an empty part of the layer, just in case the'd later want to undo. That's bad.
My proposed solution:
-First undo my stroke, Leave my selected layer alone.
-On a NEXT press of "Step backward" change my current layer to the one I came from.
I am trying to import a step assembly file in 2013. Under the options settings I no longer have or see the ability to,
(Import Multiple Solids Parts as Assembly) This was an option to check.
This seems to be a big issue as we always import the assemblies, then ground them. And this gives us the option of moving or deleting certain components, as well as opening individual components in their own part environment.
I am trying to draft an assembly - when i want to hide some components I go to the tree and right click on the part/assembly and select Visibility.
There is a square next to visibility on the right click menu (like a 'stop' button) and nothing changes when i select it.
When I right click on the tree a second time, a tick appears (like in modelling/assembly view) and when selected it disappears.
I want to turn items off in one click -
I got this part from a customer and when i try to say cut off one end of it (because it is a casting and i need to put a few machined features on it) it will not let me? I am using the datum planes to sketch on so it shows you the part sideways or longways. i tried both different planes. it seems if you try doing it looking into the part it lets you but not from these planes.
I have attached the step file.
Scott
win 7 64 bit sp1
cpu intel xeon E5-2687W0@3.106
eight core
two solid state hard drives
32 gig of ram
Autodesk product design
suite premuim 2014 64bit
Nvida quadro 4000
Space Pilot ver. 1.6.2 2010
slphantom (NNTP handle: scottl)
I am having trouble opening a step file. I actually opened it a couple of days ago fine but now when i try it tries to load for a few minutes then just crashes. I have tried other step files and they open fine.
The file is 260MB not sure if it will attach here.
Autodesk Inventor Professional 2013 SP2
I'm currently creating a procedure to manage a standard part library.
For that, I'm trying to import downloaded STEP files from suppliers online libraries, and some of these STEP files contain assemblies.
I can open them as wanted in Inventor (1 .IAM and .IPT files), problem is I can't edit .IPT names. I can only rename them in Windows, but I would like to rename in Inventor before saving for the first time.
I would like to have something like that, with "Assembly" the assembly name:
Assembly.IAM
Assembly_1.IPT
Assembly_2.IPT
Assembly_3.IPT
...
How can I do that without renaming in Windows?
I attached the STEP file I'm using, downloaded form McMaster.