AutoCad 3D :: Change 2D Spiral Column Into 3D Solid?
Oct 1, 2011I attached a draw of a spiral column that I 'd like to make into a 3D solid.
View 9 Replies
ADVERTISEMENT
AutoCAD 2013 :: How To Change Name From Column To New Column
Oct 21, 2013my drawing file , have block name 'column' but i want to change name from column to new column.
View 2 Replies View RelatedAutoCAD Inventor :: Ipart - Standard Parameter Column Change Depending On Custom Parameter Column
Jan 3, 2013I am trying to publish to the CC a guide rail. The vendor of the rail gives me the option of entering the desired length of the rail. After that he gives me the option to choose between the length that I entered and a shorter and longer standard length witch can be delivered faster.
I want to do the same thing with my published part, but I cannot make a key parameter to change depending on the entered custom parameter. I want the user to make the next steps when inserting from the CC: 1- select the size of the rail; 2-select the type of the rail; 3- enter the desired length of the rail; 4- choose between the desired length and the 2 recommended lengths (I need these 3 lengths to be shown)
Is this possible?
AutoCAD Inventor :: Make Solid / Change Parameter Of Solid
Nov 18, 2012I am making a design on inventor 2013 for a colleague who does not know how to use the inventor.
I want to make the solid and then set something up that allows the user to change a few of the parameters of the solid in a very user friendly way (i.e. a box that says "cylinder radius" and has an input box so the user can enter a value).
AutoCAD Civil 3D :: Change Column Names Not A Cell
Oct 9, 2013Is this possible if i can change the column names, not a cell. For instance: Name of the column is "Full Description" to become something else? Or add a new column with my own description?
View 1 Replies View RelatedAutoCAD Inventor :: Change File Name Column In IPart Table?
Jul 25, 2013We are using Inventor and Vault pro 2013.
I have an iPart in which I want to change the File Name Column from "Member" to "Part Number". These columns are not the same and makes the filenames for the members different when generated.
The challenge is that I already have about 100 members generated and used in different assemblies. I want these to be replaced by the new files and be deleted.
If I change the File Name Column I will get 100 new files (ipart members) that is not used anywhere. The only way I know of to replace the 100 "old" members is to do this in Vault - one by one..
AutoCAD Civil 3D :: Change Number Of Section Views Per Row / Column
Aug 20, 2010How do I change the number of section views per row/column when using the create multiple section views command? It's defaulting to 8 per row.
View 9 Replies View RelatedAutoCAD Inventor :: Copy All Information From QTY Column To PartQty Column
Oct 17, 2013In Bill of material i have custom PartQty column and is beside QTY column. I need all informations from QTY column to PartQty column to copy. Possible with iLogic? I'm selecting now manualy copy and paste but it would be nice to have automatic.
View 9 Replies View RelatedAutoCAD Inventor :: Duplicate Row Or Column Heading Values Detected - Change The Redundant
Mar 27, 2012I am trying to create different bend tables for different thickness material. If I have two radii that are the same for different thicknesses it gives me an error message on the second one that it is a duplicate column heading value. The values of the bend table are dependent on the thickness of the material. Why can't I have several different thicknesses with the same radii?
View 1 Replies View RelatedRevit :: Change Line Thickness Of Structural Column?
Jul 25, 2013I'd like to change the line thickness of these structural columns, but changing the view graphics doesn't override.
View 3 Replies View RelatedRevit :: Slanted Column Meets Beam / Column Joints
Feb 7, 2012I have a problem inserting the slanted columns when I use the "Beam/Column joints" commando. When I insert the slanted column, the beams are divided.
It should look like picture 1, but it always ends up as image 2. How can I solve this?
AutoCad 3D :: Change Colour Of Face On 3D Solid?
Apr 24, 2012is there away to change the colour of a face on a 3d solid?
i just want the top face a different colour to the rest if that makes any sence
im working in AutoCAD 2012
AutoCad 3D :: How To Change The Angle Of Unioned Solid
Dec 21, 2011I made a region of a wedge and I thought I made it the right angle. It turns out - it's not.
I've attached a similar file that exhibits the same problem. Except with regard to the specific requirement for the angle, the attached file pretty much representative of my problem, as it exists in the actual file. It's the angle going back to the wall that needs to be changed.
It's unioned. and feel free to imagine the angle is not correct. How would you change it.
AutoCad :: Change Linetype From Solid To Hidden
Jan 6, 2014I'm very new to AutoCAD but now I'm using LT 2014.
I'm trying to change my linetype from solid to hidden, and I've checked the properties, changed the linetype on my toolbar above, ensured the scale is set to 1, and zoomed in to make sure the scale is correct. I've unlocked all the layers, and checked all my different spaces to see if maybe there was a glitch that just wasn't showing the change in linetype. Nothing!
The properties for my linetype show me that the line is a dotted (hidden) line, but the line itself doesn't show as hidden.
AutoCAD Architecture :: Change Solid Textmask To Normal
Nov 9, 2011I have used textmask on text and the textmask is solid, how can I change this from solid to normal textmask .
View 3 Replies View RelatedAutoCAD 2010 :: Can't Change Radius Of Solid Body
Mar 19, 2012i can't change the radius of a solid body.
example :i made a radius with the command "fillet edges",radius=50 mm.
the next day i decided to cahnge to radius= 30 mm.
i presssed the "ctrl" bottom, clicked the radius surface to change ,but in the properties tab was written "solid face",with no radius change option.
finnaly i delleted the radius face,and made a new solid edge radius.....
is this the only way?
(solidhist variable is set to 1 ).
AutoCad 3D :: Cannot Extrude Into Solid After Change Height Along Z Axis
Nov 7, 2013im drawing by using spline and cannot extrude into solid after I change the height along z axis..how can i make it into solid? here my drawing.. i try using loft but also give surface loft
View 3 Replies View RelatedAutoCad 2D :: How To Change Default Hatch From ANSI31 To Solid
Jul 26, 2011I was just wondering if there was a way to change the default hatch from ANSI31 to Solid or something else?
View 5 Replies View RelatedAutoCad 3D :: Change Block To Solid And Extrude It To Given Length
Apr 13, 2012I inserted an an Angle block from PE Symbols into my Drawing, but it is only 2 dimensional.
I have forgotten how to change the block to a solid, and then to extrude it to a given length.
AutoCAD 2013 :: Variable To Change The Way A Solid Is Selected While In Wireframe?
Aug 4, 2013I've recently installed AutoCAD 2014 and noticed when I try to select objects behind a solid (in wireframe) it will select the face of the solid and I am not able to select any objects behind that solid. In the past, while in wireframe, I wasn't able to select a solid unless an edge was selected. Now if I click on a face it will select that item, which is not allowing me to select anything behind it. Is there a variable to change the way a solid is selected while in wireframe?
View 3 Replies View RelatedAutoCAD Inventor :: Where To Change The Settings Back To Solid Colours
Mar 20, 2013When I place the cursor over a part in an assembly it now turns bright red and semi-transparent, where to change the settings back to solid colours?
View 4 Replies View RelatedAutoCAD VB :: Change Hatch Pattern From Solid Into ANSI31 With Selection Set?
Oct 25, 2012I have several objects in a drawing. These objects are placed on a layer: "Layerhatch". These objects all have a hatch pattern: "solid". Now I want with vba that the pattern of this objects change from "solid"into "ANSI31". (For example with a button).
I have tried this with a adadselectionset but it doesn't work.
Private Sub CommandButton1_Click() Dim tSelSet As AcadSelectionSet Set tSelSet = getSelSetByLayer("Layerhatch") If tSelSet Is Nothing Then MsgBox ("No Selectionset") ElseIf tSelSet.Count = 0 Then MsgBox ("No objects found on Layer "Layerhatch") Else
[Code]....
AutoCAD 2010 :: Change Edge Color For 3D Solid Object?
May 24, 2012I've been trying to change the edge color for a 3D solid object but not able to.
I've tried using the function in Autocad but it just wont work.
AutoCAD Visual LISP / AutoLISP :: Change All Selected Hatches To Solid?
Apr 1, 2012I need to convert a lot of different hatches to solid hatches.
I haven´t found a way to do it in Autocad 2012.
script that cycles to all selected hatches and change the properties to solid?
AutoCAD 2013 :: Change Display Of Linetypes To Show As Solid Instead Of As Two Lines
Jul 6, 2012I can't remember the option how to change the display of linetypes to show as solid instead of as two lines. I think this may be something to do with the 'solidfill' option.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
AutoCAD Civil 3D :: Change Grid Lines From Solid To Dotted Line In Section View?
Sep 5, 2013How do I change the grid lines from solid to a dotted line in the Section View?
View 3 Replies View RelatedPhotoshop :: Change The Solid Black Color
Nov 29, 2007How can i change the solid black color to photoshop color?
View 5 Replies View RelatedPaint.NET :: Change Solid Colour To Gradient
Dec 4, 2013I need to alter the colour of the attached image to a gradient fill from blue to green (hex 283E90 to 9FCF6F)
The problem is every time I do this the image loses its sharpness (using magic wand, highlighting the area and filling a gradient and other similar techniques)
Photoshop :: How To Change Checked Clothes To Solid Color?
Jul 12, 2004I took a picture of my 3 year old daughter on the beach this past weekend, and since I didn't want to spend the money on a fancy white dress, I thought I would use an existing one, and then photoshop it to white. Well, the only dress we had with us on the trip was a pink/shite checkered dress, not a solid color. I'm having one heck of a time doing this.
I've tried both the color change, and the hue/saturation tools, and although I'm able to change the dress from pinkish to white, I am unable to get rid of the checkerboard pattern.
AutoCAD Visual LISP / AutoLISP :: Select Non-solid Entities On Solid Layer
Mar 19, 2012We have this need to have all of the solids in a drawing to be placed in the "solid" layer.
Sometimes folks are drafting lines to develop these solids, and keeping the lines on the "solid" layer, rather than moving them to another layer, or deleting them altogether.
I could get folks to run this command before leaving the drawing.
I'm thinking something along the lines of:
Select all entities that are on the solids layer that are not solids.
If nil, great, do nothing.
If entities are selected, let me do something with them.
I'm hoping the following can be modified ever so slightly.
(setq non_solid (ssget "X" (list (cons 0 "3DSOLID")(cons 8 "solid"))))
AutoCAD Inventor :: Split A Single Solid Body Into 2 Solid Bodies?
Sep 19, 2012I'm trying to split a single solid body into 2 solid bodies. The problem is that the body I'm trying to split consists of two separate pieces. I can split a body when it is a single piece no problem, but I'm having the problem when the two pieces are not joined at all.
When I try and split it on the origin plane it gives this error:
"Creating parting line failed. Could not build this Split"
When I try and split it on a work plane lying on one of the pieces it gives this error:
"Creating parting line failed. Modeling failure in ASM. Redefine inputs."
Or, another variation on this erorr:
"Creating parting line failed. Split feature could not create two bodies. Change the Split Tool so that split feature can create two bodies."
