AutoCad 3D :: How To Change The Angle Of Unioned Solid
Dec 21, 2011
I made a region of a wedge and I thought I made it the right angle. It turns out - it's not.
I've attached a similar file that exhibits the same problem. Except with regard to the specific requirement for the angle, the attached file pretty much representative of my problem, as it exists in the actual file. It's the angle going back to the wall that needs to be changed.
It's unioned. and feel free to imagine the angle is not correct. How would you change it.
View 8 Replies
ADVERTISEMENT
Oct 15, 2008
Im drawing in isometric view and want to change the default drawing angle from 30 degrees to another angle.
View 9 Replies
View Related
Apr 22, 2012
In attachment file i have basic figure what i would like to achieve. if i have some sort of 3d solid and i would like to cut on part of it in angle. What should i do? And on third figure, how can i make such cuts in 3d solid?
View 2 Replies
View Related
Aug 10, 2012
I have a drawing that I unioned some of the object (a 3D pipe network), and now I want them individually again.
Instead of doing the slice command at every point, is there a way to explode them or un-union them all at once?
View 1 Replies
View Related
Nov 18, 2012
I am making a design on inventor 2013 for a colleague who does not know how to use the inventor.
I want to make the solid and then set something up that allows the user to change a few of the parameters of the solid in a very user friendly way (i.e. a box that says "cylinder radius" and has an input box so the user can enter a value).
View 9 Replies
View Related
Jul 23, 2012
I drafted some point features with 0 degrees angle in one computer. When i check in another computer in same drawing for that features those are showing with 5.579 degrees angle. I expected that some system variable maybe change in that computer. which variable i need to change? If this is not related to system variable how to change this angle.
View 5 Replies
View Related
Oct 2, 2013
How do I change the default value of the angle that is between <> in the command UCS
"specify rotation angle about X axis <180.00>:"
from 180.00 to 90.00
View 5 Replies
View Related
Jan 13, 2012
Is this possible to change isometric snap angle? which is by default set to 30 degree.
View 7 Replies
View Related
Jan 5, 2013
I got a problem with editing angle constraint in assemblies. I tried edit property of constraint but it didn't move model. Simply changing Angle attribute of constraint item don't work.
Only way I achieved movemenet is
if(oOccurrence.Constraints[i].Name.Equals(name))
{
AngleConstraint a = (AngleConstraint)oOccurrence.Constraints[i];
Object oEntity1 = a.EntityOne;
Object oEntity2 = a.EntityTwo;
String sVal = "" + angle + " deg";
[Code]...
but this is really slow, as much as changing throught parameter:
if (assemblyDoc.ComponentDefinition.Parameters[i].Name == "d655")
{
Inventor.Parameter invParam = assemblyDoc.ComponentDefinition.Parameters[i];
invParam.Value = Math.PI * angle/180;
inventorApplication.ActiveDocument.Update();
}
View 1 Replies
View Related
Jan 12, 2012
I am drawing an isometric drawing. In order to draw a dimension line, the tutor says I have to change the obliquing angle to s0 for left plane and -30 for right plane.
I could find anything in: Modify Dimension Style
Where should I change this angle?
View 9 Replies
View Related
Feb 8, 2013
I am constructing a skateboard truck and would like to know how to change the angle of the circle face in the first picture to be at the same angle of the face in the second picture. The highlighted areas have been coloured gold. I have attached the ipt file below.
View 6 Replies
View Related
Jan 19, 2012
I have a plan with lots and lot numbering. I made the lot number text annotative and matching view orientation. But when it rotates in the view it rotates about the left justification point instead of middle as inserted into drawing. So I inserted lot numbert text into drawing and changed text to non-annotative, but now i can not change the text rotation angle unless i use rotate command on each individual piece of text (was trying to pick all text and change in properties box). Using feature lines to assist in grading design so not sure if this is an autocad problem or a civil 3d 2012 problem. I can rotate dtext made or inserted in drawing.
View 3 Replies
View Related
Mar 13, 2013
How do I change the crosshair so it is at an isometric angle for drawing?
View 4 Replies
View Related
Sep 28, 2009
I want it to be "Angle Right" instead of "Azimuth".
View 6 Replies
View Related
Sep 25, 2012
I would like to build an expression that I can use in a label at a structure in a profile view to show the horizontal angle change on the alignment at the structure.
Of course, in the available structure expressions, we do not have the alignment delta angle at that point even though I have a referenced alignment in my pipe network.
Our subdivision code has minimum drop across manhole for different ranges of horizontal angle change.
I want to create a label that shows the minimum drop required at a manhole off it's referenced alignment and I would like to see it on the profile view, because that is where the drop value is relevant.
View 2 Replies
View Related
Jun 11, 2013
How do I model (or calculate) the fewest welds/fittings required to change angle and elevation in a pipe run, as shown in Option1 below.
For this example the constants are: 8" standard steel pipe, one of the fittings is a standard butt weld 45 (12" radius), bend angle is 70 degrees, and the elevation change is 9". The custom fitting is cut from a standard 8" long radius 90.
Note: Option2 is just shown for reference, I'm only interested in solving Option1
Bend with Elevation change.gif
View 9 Replies
View Related
Jun 1, 2012
Just learning 2D CAD and trying to draw a cross section of a timber winder stairs as the strings change angle (I think) at the winder section. Looking at 3nr winding steps.
Setting out a standard stairs is okay, so I have the floor to floor height.
View 4 Replies
View Related
Nov 24, 2013
I am working in the 3ds Max 2014 tutorials. The specific tutorial is "Drawing Patterns for the Clothes". The subsection is "Use the Garment Maker and Cloth Modifiers to Prepare the Skirt". I am working on the area of the SEAMS to create the PLEATS. 3ds Max won't allow me to change the Crease Angle to 150 as it says in the tutorial. When I position the mouse over the box where the dimensions are, it turns into a hand shape. I can change any other dimension in the SEAMS rollout.
View 1 Replies
View Related
Apr 24, 2012
is there away to change the colour of a face on a 3d solid?
i just want the top face a different colour to the rest if that makes any sence
im working in AutoCAD 2012
View 3 Replies
View Related
Oct 1, 2011
I attached a draw of a spiral column that I 'd like to make into a 3D solid.
View 9 Replies
View Related
Jan 6, 2014
I'm very new to AutoCAD but now I'm using LT 2014.
I'm trying to change my linetype from solid to hidden, and I've checked the properties, changed the linetype on my toolbar above, ensured the scale is set to 1, and zoomed in to make sure the scale is correct. I've unlocked all the layers, and checked all my different spaces to see if maybe there was a glitch that just wasn't showing the change in linetype. Nothing!
The properties for my linetype show me that the line is a dotted (hidden) line, but the line itself doesn't show as hidden.
View 9 Replies
View Related
Oct 5, 2011
Is there a quick way to rotate an object to match an angle without knowing what the angle is? I am using AutoCAD 2011 now. I was using 2007 and I had an add on command the would rotate an object using a base point and picking the two lines that make up the angle, and it would match the angle you wanted. I can not get that command to load in 2011.
View 4 Replies
View Related
Jul 25, 2012
I have a property line that is N 36d19'52" E but needs to be N 12d52'18" E. The obvious and calculated rotation angle would be 23d27'34" but when I rotate the line by the calculated angle it doesn't rotate to the right angle. It's off by 0d11'10"!? When I draw a line by bearing at N12d52'18" E and inquiry the angle between the property line and the drawn line the angle difference is in fact 23d27'34".
View 1 Replies
View Related
Feb 11, 2011
Let's say I am inserting a square block into a dwg and want to get it parallel to an existing angled line. Do I have to read the angle of the line and insert the block to that angle or is there a quicker way?
View 6 Replies
View Related
May 26, 2013
I have used a driven contraint in a sketch.
Can that also be done in an assembly?
In one assembly I want to make one angle half of a driven angle.
View 3 Replies
View Related
Nov 9, 2011
I have used textmask on text and the textmask is solid, how can I change this from solid to normal textmask .
View 3 Replies
View Related
Mar 19, 2012
i can't change the radius of a solid body.
example :i made a radius with the command "fillet edges",radius=50 mm.
the next day i decided to cahnge to radius= 30 mm.
i presssed the "ctrl" bottom, clicked the radius surface to change ,but in the properties tab was written "solid face",with no radius change option.
finnaly i delleted the radius face,and made a new solid edge radius.....
is this the only way?
(solidhist variable is set to 1 ).
View 5 Replies
View Related
Nov 7, 2013
im drawing by using spline and cannot extrude into solid after I change the height along z axis..how can i make it into solid? here my drawing.. i try using loft but also give surface loft
View 3 Replies
View Related
Jul 26, 2011
I was just wondering if there was a way to change the default hatch from ANSI31 to Solid or something else?
View 5 Replies
View Related
Apr 13, 2012
I inserted an an Angle block from PE Symbols into my Drawing, but it is only 2 dimensional.
I have forgotten how to change the block to a solid, and then to extrude it to a given length.
View 2 Replies
View Related
Jul 6, 2013
how to convert "real world" angles of elliptical arcs into those shown in a dxf file?
Say that I have drawn an elliptical arc with its start angle on 210 degrees and an end angle of 324 degrees. The values in a DXF file, for an elliptical arc, have something to do with the contant "PI" (3.14159). I know that a full circle is 2*Pi but how to do this with elliptical arcs!!
View 1 Replies
View Related
