AutoCAD Civil 3D :: Structure Expression To Test For Horizontal Angle Change
Sep 25, 2012
I would like to build an expression that I can use in a label at a structure in a profile view to show the horizontal angle change on the alignment at the structure.
Of course, in the available structure expressions, we do not have the alignment delta angle at that point even though I have a referenced alignment in my pipe network.
Our subdivision code has minimum drop across manhole for different ranges of horizontal angle change.
I want to create a label that shows the minimum drop required at a manhole off it's referenced alignment and I would like to see it on the profile view, because that is where the drop value is relevant.
View 2 Replies
ADVERTISEMENT
Sep 6, 2013
I am trying to make a single point label style that will return a blank line in the label if no data is provided.
The way i have it coded now my label for a structure with only two inverts comes out looking like this:
STCB 500 Rim=300.00
12" CONC N IE=295.00
12" CONC S IE=296.00
IE=300.00
IE=300.00
I would like the number of lines returned to match the actual number of inverts in the structure and leave out the place holders.:
STCB 500 Rim=300.00
12" CONC N IE=295.00
12" CONC S IE=296.00
I can work around this by having a label style for each number of pipes, but i would also like this code to be inseted into a table style and in that case i don't know of any way to assign multiple styles to one table.
My current code looks like this:
RIM=<[Point Elevation(Uft|P2|RN|AP|GC|UN|Sn|OF)]>
<[1 SIZE(CP)]> <[1 TYPE(CP)]> <[1 DIR(CP)]> <[IE TEXT(CP)]><[1 INV(Uft|P2|RN|AP|GC|UN|Sn|OF)]>
<[2 SIZE(CP)]> <[2 TYPE(CP)]> <[2 DIR(CP)]> <[IE TEXT(CP)]><[2 INV(Uft|P2|RN|AP|GC|UN|Sn|OF)]>
<[3 SIZE(CP)]> <[3 TYPE(CP)]> <[3 DIR(CP)]> <[IE TEXT(CP)]><[3 INV(Uft|P2|RN|AP|GC|UN|Sn|OF)]>
<[4 SIZE(CP)]> <[4 TYPE(CP)]> <[4 DIR(CP)]> <[IE TEXT(CP)]><[4 INV(Uft|P2|RN|AP|GC|UN|Sn|OF)]>
LADDER <[LADDER(CP)]>
The problem is that 1 INV-4 INV are being defined by an expression that reads like
{Point Elevation}-{1 MD}
so when no data is intered for my UDP "1 MD" it returns the point elevation. I want an equation that says if rpoitn elevation -measure down=point elevation then no data is shown.
View 5 Replies
View Related
Aug 9, 2013
I'd like to label profile elevations at horizontal geometry points. I accomplished this with a profile reference. Essentially labeling bottom of curb at pc, pt, mid, and pi, and would like to get and expression to add the top of curb, but under hor. geo style expressions you cannot pickup pgl data and PGL style expression are not loaded in the hgp data.
Note: Its all Resistentialism, so keep calm and carry on 64 Bit Win7 OS.
View 3 Replies
View Related
Mar 21, 2012
get 2012 to make an expression for curve delta angles come in DMS and not decimal degrees? Why do I need this? Well C3D does not have a delta angle label for curve pipe and our client requires it on the drawings.
View 9 Replies
View Related
Dec 13, 2013
I'm trying to create a custom expression in a structure table that will list the "size" of the structure, wheter it be a circular or rectangular structure. My column simply states size and I want it to label 5' for a circular or 4'x4' for a rectangular (or whatever the specific sizes are). The thought was to create an IF function, but Structure Shape was not available to use in expressions (among other problems). Short of using the description field (tedious) as a workaround?
In this example - CB-104 is a rectangular structure and CB-106 is a circular. I'd like the CB-104 size to read 4'x4'.
Civil 3D 2014 SP1
View 5 Replies
View Related
Aug 3, 2013
I am create the stron network. I want structure profile elevation. How to create expression in structure reference alignment profile elevation.
View 9 Replies
View Related
Aug 2, 2013
How to specify the deflection angle while plotting the horizontal alignment? I’m wondering if there is a way to provide the deflection angle while plotting the horizontal alignment (based on the tangent-tangent with curve method).
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, RevitWindows 7 (Ultimate 64 bits),Firefox 20.0,Kaspersky 2013.
View 2 Replies
View Related
Jul 31, 2013
How the deflection angle can be shown in the horizontal alignment curve? I’m wondering if there is a way to automatically show the deflection angle of the horizontal alignment curve (attached)?
View 3 Replies
View Related
Aug 3, 2013
Angle-distance method to stake out the horizontal alignment by total station,Assuming that the total station with reflector is the tool that it is intended to lay out the circular curve after being designed then the only way to do so is to construct a table that contains angle-distance values.
I’m wondering if the C3D can provide this table (attached)
View 9 Replies
View Related
Aug 22, 2013
I assume nobody has been able to create a parametric part used for storm pipe networks that can have the pipes attached to a point within the structure other than the insertion, or have the elevation read from a point other than the insertion.
With that in mind, we are trying to develop a tool that would allow us to pick a strucutre, and set its "rim" elevation to a point on a proposed surface that is not at the insertion of the strucure. I am decent with lisp, but have not attempted to gather info from random points on civil ojects.
View 9 Replies
View Related
May 21, 2012
I have about 100 manhole structures with a 0.5' sump. I want them all to 0.0'. Is there a way to change the sump on more than one structure at a time?
The only way I have found to change the sump depth is one at a time through the structure properties.
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
View 2 Replies
View Related
May 21, 2012
Trying to change the position of the "elevation" labels on the horizontal axis. They come default as being inside the profile and i want them shown on the outside of the profile box.
View 3 Replies
View Related
Sep 25, 2013
How to set change the radius to degrees in horizontal geometry band set profile.
View 2 Replies
View Related
Nov 4, 2011
We use C3D 2012 (metric only) - We are attempting to customize our list of structures for Sanitary Sewers. The structure list shows sizes we do not use and we would like to modify them. However, when we try to select the "Inner Diameter" it displays a list of sizes that we can not seem to modify or add to.
I have looked at some of the XML files to try and modify or add new sizes (example: AeccStructConcentricCylinder_Metric.xml) , but they do not seem to be recognized even after I restart the program.
Here is what the file looks like:
<ColumnConstList desc="Inner Structure Diameter" dataType="float" unit="mm" name="SID" id="CCL1" visible="1" context="StructInnerDiameter" index="0">
<Item id="i0">1200.0000</Item>
<Item id="i1">1350.0000</Item>
<Item id="i2">1500.0000</Item>
<Item id="i3">1800.0000</Item>
<Item id="i4">2050.0000</Item>
<Item id="i5">2300.0000</Item>
<Item id="i6">2550.0000</Item>
I tried modifying the last line replacing 2550 with 3600.
I also tried adding a line <Item id="i7">3600.0000</Item>
I saved the XML file and restarted the program with nothing changing that I can see.
Looking for correct file(s) to edit so I can modify the LISTS that come up in the piping modules.
View 2 Replies
View Related
Feb 12, 2008
One good thing about null structures is the way they display in 3D. They cover that gap in the pipe segments. Can I steal that shape?
I am currently using a simple cylinder for water pipe "joints" and turning it off like most people do I think.
View 4 Replies
View Related
Jan 19, 2012
I have a plan with lots and lot numbering. I made the lot number text annotative and matching view orientation. But when it rotates in the view it rotates about the left justification point instead of middle as inserted into drawing. So I inserted lot numbert text into drawing and changed text to non-annotative, but now i can not change the text rotation angle unless i use rotate command on each individual piece of text (was trying to pick all text and change in properties box). Using feature lines to assist in grading design so not sure if this is an autocad problem or a civil 3d 2012 problem. I can rotate dtext made or inserted in drawing.
View 3 Replies
View Related
Apr 30, 2012
I have drawn a pipe network with multiple concentric sturctures. I need to make them all eccentric now. Is there an easy quick way to do this, or do I have to redraw all of them. When I go to the properties, I cannot find an option that allows me to change this.
View 2 Replies
View Related
Sep 28, 2009
I want it to be "Angle Right" instead of "Azimuth".
View 6 Replies
View Related
Oct 15, 2008
Im drawing in isometric view and want to change the default drawing angle from 30 degrees to another angle.
View 9 Replies
View Related
Aug 8, 2013
I'm setting up styles and trying to play spot-the-difference; I can't see any difference between these three settings.
View 9 Replies
View Related
Nov 28, 2013
I have a link starting from P1.Is there a way to check if the link is intersecting EG or not?
Civil 3D 2014 x64
Windows 7 64-bit
16GB RAM
View 2 Replies
View Related
Aug 23, 2012
How can I evaluate and expresion to the nearest tenth?
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
Note: Its all Resistentialism, so keep calm and carry on
64 Bit Win7 OS
View 9 Replies
View Related
Feb 2, 2012
I am trying to create an expression in SAC and am having trouble getting it to work the way I want. The goal is to have the subassembly figure out what slope to use. If I do not have super elevation, I want it to use the grade for the in the input.output parameters. If I do have super elevation, I want it to use the super settings. So far I have this
IF((Side=Left)AND(SE.HasLeftSO),SE.LeftSO,CType(ShoulderSlope,Double))
This works if I am only creating a left side. However, I want it to decide which side super elevation settings by the input parameter side.
View 5 Replies
View Related
Mar 15, 2012
One of the main things I do is label elevations from an alignment and a profile, in plan view.
I have a style that does this, and it gets to the point where it asks to pick the profile.
If the profiles are data ref's, i can pick from a list, but if the alignment is xreffed, you must do a graphical pick.
This is super inconvenient, as my profile views are in a different base than my alignments, and they are way off to the side.
So I must xref the profile base in, and split my viws so I can pick them without excessive zooming.
Did Autodesk neglect the fact that if they make objects available via xref, they also need to make child objects available?
If I choose to use a dref as the data source, I must make a dref to the alignment and each profile I want available.
Three steps per street at a minimum.
This is also super inconvenient.
I'm struggling to find a decent workflow on this. Both approaches seem painful.
I had always thought the xreffed objects would provide the profiles, and only found they do not just now [URL]...
View 1 Replies
View Related
Oct 25, 2013
I need to edit a personnal expression in VBA ("COMPA")
I join an attachment to show you what i want to edit.
The problem is that i don't find where i can modify this expression in VBA in the database.
View 1 Replies
View Related
Jan 15, 2013
I'm trying to use an expression for text height and everytime I enter the name of the expression I get "Invalid Input". Is there a trick to doing this?
I even changed a style that "HAD" allowed me to use an expression, to a number then tried to reenter the same expression name that was there and get "Invalid Input".
Civil 3D SP2.1
64 bit
windows 7
View 6 Replies
View Related
Jul 3, 2013
I am trying to create a label for fire hydrants in plan view that shows the flange elevation. I want the elevation to be 0.4' above the adjacent road profile. I added a reference text component to my label style that shows the profile elevation. Where would I find the expression for the profile elevation reference text?
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
View 2 Replies
View Related
Nov 26, 2012
Here is my expression:
IF((FMOD({Raw Station}+5,15))!=0,-1,({Profile Elevation}-100*FLOOR({Profile Elevation}/100)))
I have also tried it without a pair of brackets:
IF((FMOD({Raw Station}+5,15))!=0,-1,{Profile Elevation}-100*FLOOR({Profile Elevation}/100))
and I have tried it using {Station Value} instead of {Raw Station}
Here's what it's meant to do (because it's a long one):
If the station value + 5 is not divisible by 15, return -1
If the station value + 5 is divisible by 15, return the profile elevation,
if the profile elevation is in the 100 range, subtract 100
if the profile elevation is in the 200 range, subtract 200...etc
Here is my conundrum: If I use the expression in a profile label, it works fine. But if I use it in an alignment label as reference text, it returns -1 for every value.
View 9 Replies
View Related
Jul 22, 2013
I was wondering if it is possible to use an expression in a general note label? The type of label I am using is a general note label that displays our finish grade profile elevation in plan view. What I am trying to do is add a value to that label for the TC elevation and G at the ROW. I noticed in the settings tab of the tool space, surfaces has an expression button that has what I want but I am not seeing that under General/Label Styels/Note. Is it possible to right my own expression? We are using Civil 3D 2008 with Windows XP.
View 3 Replies
View Related
Oct 8, 2012
We Need an expression to round Pipe Slopes to the nearest 0.5% slope. We were working with:
ROUND(({Pipe Slope}/0.5))*0.5
but it only returns 0.00.
View 9 Replies
View Related
Jun 4, 2013
have a diesel expression that would read a layout tab? for example if i have a layout tab names 244180101 I would need it to read the last 2 digits in the layout tab.
AutoCAD Civil 3D 2014
HP Z620 Workstation 64-bit
Duel Intel Xeon E5-2620 @ 2.00 GHz
Ram: 48 GB
View 9 Replies
View Related
