im drawing by using spline and cannot extrude into solid after I change the height along z axis..how can i make it into solid? here my drawing.. i try using loft but also give surface loft
View 3 Replies
I inserted an an Angle block from PE Symbols into my Drawing, but it is only 2 dimensional.
I have forgotten how to change the block to a solid, and then to extrude it to a given length.
I'm trying to change a routine i just wrote that draws 3d pipes. I wanted to make it so that when a user selects the beginning point and ending point of the pipe, the LISP changes the ucs to that vector, draws the circle at the beginning point and extrudes it to the second point.
It actually works great except when the ucs changes, so do my user points because of teh origin change. Is there a better way I might get this to do what I wnat it to?
(setq ip (getpoint "
Pick First Point:"))(setq ep (getpoint "
Pick Second Point:"))(command ".ucs" "za" ip ep)(setvar "osmode" 0)(command ".circle" ip "d" od)(command ".extrude" (entlast) "" (distance ip ep))(command ".ucs" "w")(setvar "osmode" oldsnap))
I've had a problem for a while now trying to extrude a 3d polyline into a 3d solid. The polyline is on different planes which is one cause of why it won't work. Instead of extruding into a solid it only does the sides making it a mesh rather than a solid. If its on one plane I know it will work.
View 2 Replies View RelatedCan you lock the extrude mode to solid?
View 9 Replies View RelatedWhen I create a sketch then extrude it to a solid model, how can I modify the sketch afterwards?
View 7 Replies View RelatedHow to permanently change the settings of the EXTRUDE command so my polylines, by default, will become a solid instead of a surface object?
View 5 Replies View RelatedIs it possible to automatically project the x-axis, z-axis or z-axis onto the sketch plane?
I.e. every time you open a new sketch the corresponding lateral and vertical axis will be projected onto the sketch.
I am making a design on inventor 2013 for a colleague who does not know how to use the inventor.
I want to make the solid and then set something up that allows the user to change a few of the parameters of the solid in a very user friendly way (i.e. a box that says "cylinder radius" and has an input box so the user can enter a value).
i'm applying an extrude modifier to a simple spline shape, and i am accustomed to the extrude modifier generating a solid 3d object in the shape of the spline, if the spline is a closed shape.
however, in this case, the extrude modifier is generating just a 3d outline based on the spline's shape...
i can't figure out why i'm not getting a solid 3d object since the spline is closed (i checked all the vertices).
file is attached (the spline in question is named "upper side section")
daniel_k_sancturary_one07_1.zip
Is there a setting for extruding polygons so it doesnt leave the original polygon.
When i extrude a polygon into a 3D solid, it extrudes fine but it also keeps the original polygon which means i have to delete it?
I am trying to change the height of the points. "pntelev layer" all at one time. The drawing was giving to me by our surveyor, and I am having a hard time finding a command to edit multiple points at the same time.
I can select one point and utilize block editor to change the height, but is there a way to select multiple points and edit all of them at one time?
I am using AutoCad 2012 and I believe that is one of my issues, b/c in the past when using Civil3D I had a points tab, and that is where we went to edit things like this.
I attached a .dwg
I have recently upgraded from LT06 to LT09.Why am I having trouble changing the text height on my dimension? I used to be able to double click on a specific dimension and change the text height to anything I wanted and than using the "match properties" icon change all the others.
View 9 Replies View Relatedhow to change the MText Height property in vb.net, i used the below code, Dim mytext As New MText mytext.Contents = txt mytext.height = 130 mytext.Location = Pt mytext.Attachment = AttachmentPoint.MiddleCenter But it is showing an error that Height is an invalid method.
View 2 Replies View RelatedI have a dynamic block of some door hinges. Depending on the height of the door, depends on the type & quantity of hinges used. I was wondering if it is possible to have a block that detects height? If I insert the hinge block onto my drawing, and snap the base point of the block to the bottom left of the desired door, stretch the pick point to the top, I would like it to automatically change from 2x small hinges (for doors under 312mm high), to 2x large hinges (for doors under 1000mm), and finally to 3x large hinges (for doors over 1000mm)?
I have attached a PDF for visual reference to what I'm talking about.
My text style height is set to 1/8, however my leader text height is 3/16. How do I change the leader text height? T
View 6 Replies View RelatedIn previous versions when you hovered over an invisible axis in the browser you could see the whole line in the model. Now you just get the end points displaying as yellow circles and it can be quite difficult to see where the line is. What's the point of this change? Is there a way to get the old behaviour back?
View 1 Replies View RelatedIs it possible to change the row height in a Line and Curve Table.
Civil 3D 2012
I mean the dimensions in sketches in a model part, not the drawing dimensions which are controlled by styles .
View 1 Replies View RelatedFor starters, I am using AutoCAD 2013.
I am having trouble with changing the text height of attributes in a block. I know that I can normally use BATTMAN and ATTSYNC to change the text height, but those are not working in my case.
I am using a point parameter and STRETCH action to enable my attributes to be moved, while the main object stays in place. When the attributes are not tied to the point parameter and I use BATTMAN in the block editor, the block will insert with any changes to attribute text height. When they are tied to the parameter and I use BATTMAN in the block editor, the block will insert with the attributes at the text height that they were created at. The only way I can change the text height is to use BATTMAN in model space.
I can work with this, but it would be easier to use BATTMAN in the block editor since my attributes are aligned vertically and changing the text size ruins the spacing between them. It would be much easier to both change the text size and respace in the block editor.
Is it possible to change the text height of a drawing view label through VBA?
I have tried to change it by creating a new text style manually with the text height I require and then through VBA set the view label to use that style.
The View label takes on the new style but does not change the text height.
I have tried to use 'StyleOverride FontSize=' but I have text that is multi lined and using this command converts all my text onto one line.
Is it possible to change the text height of a drawing view label through VBA?
Below is my code so far,
Sub HoleDetailSheetLabels()
' Declare the Application object
Dim oApp As Inventor.Application
' Obtain the Inventor Application object.
' This assumes Inventor is already running.
'Set oApp = GetObject(, "Inventor.Application")
[code]...
Trying to change the position of the "elevation" labels on the horizontal axis. They come default as being inside the profile and i want them shown on the outside of the profile box.
View 3 Replies View RelatedWhen you make a custom table in VB.net, adding in the Row Height property in the custom table create line only changes the data cell row heights, not the title cells or the header cell. How do yo do set the title/header cell row heights ?
Dim oRowHeights_FS(11) As DoubleoRowHeights_FS(0) = 0.6oRowHeights_FS(1) = 0.6oRowHeights_FS(2) = 0.6oRowHeights_FS(3) = 0.6oRowHeights_FS(4) = 0.6oRowHeights_FS(5) = 0.6oRowHeights_FS(6) = 0.6oRowHeights_FS(7) = 0.6oRowHeights_FS(8) = 0.6oRowHeights_FS(9) = 0.6oRowHeights_FS(10) = 0.6oRowHeights_FS(11) = 0.6Dim position_FrameShear As Point2d = _invApp.TransientGeometry.CreatePoint2d((oInvSheet.Border.RangeBox.MinPoint.X + 16), (oInvSheet.Border.RangeBox.MaxPoint.Y))Dim oCustomTable_FrameShear As CustomTableoCustomTable_FrameShear = oInvSheet.CustomTables.Add(vValue_FrameType & " " & vValue_Hand & " Frame Shear List", position_FrameShear, 6, 12, oTitles_FrameShear, oContents_FrameShear, oColumnWidths_FrameShear, oRowHeights_FS)
i try to make an animation. I create a cylinder and i want to rotate it by longitudinal axis. i click 'components', select the cylinder and after i click 'position' to select the axis that axis system appears in the right side of the cylinder not in the middle. If i continue whit this settings the cylinder will rotate by a circle not by his longitudinal axis. How can i move that axis sistem in the middle of the cylinder? I can drag it but can't place it exactly in the middle.
View 1 Replies View RelatedIs there any way I can extract the rotation of a block relative to the yz axis and xy axis. I can extract the insertion point and xy rotation but not the yz and xz.
View 9 Replies View RelatedI have googled about changing the height of individual tracks and couldn't find much. Is it adjustable? If not, is this planned for the future?
View 1 Replies View RelatedI'm learning 3ds max design 2013 and i noticed this behavior. I dont know if it's normal or a bug but from the screenshot you can see that: when selecting the front view, the Y axis goes upwards, but when i select the perspective view the Z axis goes up. Why?
View 2 Replies View RelatedI have a brush that is square. Is it possible to change just the width or just the height and if so, how?
View 2 Replies View RelatedWhy there is no infill when there is a hight elevation change? the path is a "building pad", and I'm pretty sure normally it's filled with dirt....Did I do something with the site setting?
View 4 Replies View RelatedHow We can to change the default height Ceiling plane In Project Browser.
For example, the Default is 2600mm.
I want to Over 2800mm set.
Not in Time Drawing Ceiling.
I'm building a PEMB frame family partly to teach myself and because none of the ones I could find online match the ones I'm working with. It's been a bumpy road but I've gotten the family to the point where there are parameters and elements for the flange, web, baseplate & girts.
Where I've run into a problem are the bracing flanges. The flange at the top of the column was simple enough since it's always horizontal but the beam braces are all 90 deg to the top chord. Any refrence plane or reference line drawn from the intersection of the bottom & column chords to the top chord does not move with the other chords when the family types are changed. I applied a 90 deg angular dimension constraint between the top chord and the bracing flange but when I change the pitch of the top chord by increasing the Ridge Height Revit gives me a warning message that the constraint is no longer satisfied instead of rotating the flange!
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
