AutoCAD 2013 :: Variable To Change The Way A Solid Is Selected While In Wireframe?
Aug 4, 2013
I've recently installed AutoCAD 2014 and noticed when I try to select objects behind a solid (in wireframe) it will select the face of the solid and I am not able to select any objects behind that solid. In the past, while in wireframe, I wasn't able to select a solid unless an edge was selected. Now if I click on a face it will select that item, which is not allowing me to select anything behind it. Is there a variable to change the way a solid is selected while in wireframe?
I'm trying to create a solid body from a non uniform 3d frame Actually I bought this model and it turned out to be hollow inside. How to make it a complete single solid body? [This model is a part of human bone]
I am in need of creating a solid drawing from my wireframe drawing in model space. I have never done any 3d modeling in autocad before it took me a few days just to get the wireframe of a staircase done! I have tried to render this object in viewport but it disappears after I click on it or move around, therefore I cannot see it in my paper layout. How do I make a rendered object stay? Also I want to plot this on 22x34in and 11x17in paper, how would I go about getting a high quality rendered image. I am using autocad 2010.
In 3dsMax 2014 I have noticed that when you select an object it will display it's wireframe. You use to be able to cycle through the F3 and F4 combinations to show/hide this wireframe however it does not appear to work in 3dsMax 2014.
Is there another way (besides the F3 + F4 hotkeys) to disable this wireframe on the selected object?
Software: Autodesk 3dsMax 2014 - Service Pack 3 (64-Bit)
Ok so in previous version if you have an object selected, and hit F4, ( to urn on and off Wireframe display). you could have and object selected, without wireframe showing, or showing if you prefer.
This option seems to have been removed, or moved in 2014.
I can't remember the option how to change the display of linetypes to show as solid instead of as two lines. I think this may be something to do with the 'solidfill' option.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition Windows 7 HP Z400, Intel Xeon W3550 3.07GHz 12.0GB RAM, ATI FirePro V4800 (FireGL)
What is the variable that controls the order in which objects are selected? In other words, I want to be able to always select the last object created by default when objects are overlapping without using object cycling.
I'd like to export AutoCAD file from a model built in 3Ds Max to get some engimeering drawings(as below) But the dwg file export from 3Ds Max is always with the wireframe(as the last one)
I recently installed the SketchUp plugin in the hope that I would be able to easily and effectively transfer SketchUp models into AutoCAD and subsequently into Revit.
However, upon importing the SketchUp model, extra wireframe is added to the flat surfaces from vertex to vertex. This does not affect the CAD model as such as it appears that these lines are necessary for CAD to create the surfaces.
Though when imported into Revit from CAD, these surfaces are unable to be processed and the model becomes incomplete, also failing to identify the windows and doors that had been previously identified as the model had been taken from Revit, through CAD and to SketchUp with no problems and then all the way back again.
What is the next step of importing it back to Revit as I am unsure how to retain its levels (i.e Floor plans).
I have finally created the shell of the complex surface that you see. This is only a section of the part because I cannot show the whole thing for proprietary reasons. I formed solid surfaces using the network command. The propblem is that it will not convert to a solid because the surface seams are not "water tight." When the network command created the solid surfaces, the surface seams do not exactly match the lines so there are gaps in all the seams. I have tried blending, patching, etc. and nothing works. how to convert this to a solid without losing the outlines and the shape?
I am making a design on inventor 2013 for a colleague who does not know how to use the inventor.
I want to make the solid and then set something up that allows the user to change a few of the parameters of the solid in a very user friendly way (i.e. a box that says "cylinder radius" and has an input box so the user can enter a value).
Is it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.
i am having a hatching issue, it seems no matter what hatch pattern i use and what hatch scale, alot of the hatch looks solid instead of the pattern i want, for example i am using currently ANSI37 @ Annotative with a scale of .20 and on the same paperspace page one plan with the hatch shows the cross hatching and the other one below looks solid (see attached) now i can go and say change the hatch scale and it reverts to the cross hatching, but then when i zoom out it goes back to "solid" is it a graphical issue?
This is one of those "I don't know what I did, but I want to change it back" items.
I have a rigged, poly character, and when trying to change the view to wireframe, I changed the display resolution of the character. I think I maybe hit "3" instead of "4". But now the charactere is displayed with the low-poly cage surrounding the smoothed geometry, and I do not know how to switch the display back so I do not see the low poly cage any longer.
I have set may MENUBAR system variable value to 1, But whenever i exit from autocad 2013 this value changes automatically back to 0 and the pulldown menu disappears.
Also i have attached the screenshots of autocad after manually changing menubar varable with pulldown menu vissible and after exiting and starting autocad again to see the screen without pulldown menu and variable changed to 0 again.
I cannot get the menubar variable to stick. everytime I start autocad I have to re-enter the command to have the menubar back. I am sure this is something stupid I am over looking.
I have custom pull down menus that I use for hatching. The reason I use this method instead of the tool pallet or the regular hatch toolbar is that I have quick access to multiple commonly used hatch patterns already set up with scales and directions and can pick multiple objects at once.
The only problem is I loose the associativity when stretching an object. It's Associative if I use the hatch command or the tool pallet. I had no problem with this method when using AutoCAD 2010. Is there some system variable setting that has changed?
We are in the middle of implementing AutoCAD 2013 to replace 2010 so at the moment I am converting / modifying our own code to suit the AutoCAD 2013 API.
One of our routines collects data from drawings (drawings are not fysically opened in AutoCAD) using the system variables 'LimMin' and 'LimMax' in order to collect all objects drawing within the titleblock.
Only the objects in the titleblock area need to be processed and this gives the engineers also the opportunity to add extra information outside the titleblock. We have used this method in 2007 and 2010 releases of AutoCAD succesfully.
But with AutoCAD 2013 I have run into a snag. As said does this routine not fysically open the drawing in AutoCAD it merely adresses the 'autocad database' so to speak. It seems that 2013 selects the variables from an opened active drawing instead of the 'opened' drawing by the routine. What do I need to modify in the lines of codes stated above to get this rouine up and running?
The workaround for this moment is to skip the collection in the titleblock area al together and select all objects in the entire drawing which does not speed up things very much
My office is launching 2013 and the one issue that is really bothering me is the selection preview variable keeps getting reset <0> and I cannot figure out what is causing it?
I like to have the selection variable set to <3> and my selection cycling set <-2> so I can hold down shift and tap space bar to visually cycle through overlapping objects but this is very difficult to do when the selection preview variable resets to none <0>.
I think the new box popup in this release is very bothersome and would like to figure this glitch out.
I'm creating a bin model. I've hollowed it out, the thickness of the bin tapers from top to bottom. I have selected the edges at the bottom of the bin and just want to connect these to form a solid shape which can be the base of the bin. At the moment it's hollow all the way through.
When I select these edges, then select 'border' and 'cap', nothing happens. How do I make this selection into a simple circular base?
I was attempting to troubleshoot some performance issues I've been having using process monitor. I noticed that AutoCAD 2013 is constantly checking for an XREFSTATE System variable, that according to documentation is stored in the registry. however, process monitor is reporting this variable as not found. So that leads me to a couple questions:
why is it constantly checking the status of the variable
why is the variable not located within the path it is looking for.
I have blocks in a drawing that were made using the 'retain' method. WHen I go to insert the block I cannot see the block preview at the crosshair cursor. The block only becomes visible once I have clicked the left mouse key at the insertion point.
This means I can't rotate it either as I can't see it until I have clicked to place it.
Which system variable (And what setting) will allow me to see the block as I'm inserting it?
Is it possible to change the system variable "TEXTSIZE" with an autolisp routine? I have hundreds of drawings that have varying textsize settingings and I can't get it to let me change it, unless I go into "Style" and manually change the value to "0" before I run the routine, and there are simply too may drawings to do that everytime. So, is there a way to reset the textsize to 0 through Lisp?