At home I have 3ds Max 2013 and at my class I am currently taking, they have 3ds Max 2012. When I tried to upload my 3ds Max 2013 file using 2012 I got; "File Load Failure (*file path*).
I now understand that I can save the file as a 2012 (from the 2013 version) but is there anyway to convert the file while at the class? I will not have access to my 2013 file for a while, and this file is homework..
I've just switched to autocad 2012, and when I'm opening dwg files it takes up to 2-3 minutes to open and save them. Autocad 2007 opens and saves the same files in mere seconds without problems.
View 9 Replies View RelatedI have a large scan project (Scene 5.0's new file structure) that contains a few registered workspaces (*.fws) and I would like to import at least one into AutoCAD 2013. I followed the workflow of going to Insert>Point Cloud>Create Point Cloud, and I selected the *.fws that I wanted to import (or rather have indexed into a *.PCG).
As soon as I hit 'Create' I get an error that says 'FAILURE! Fail to open scan file" and nothing happens. I can import *.fls, but they are not registered.
Does FARO not support AutoCAD 2013?
Can you save files for 2012 in 2013? I have the ability to upgrade to 2013 while others at my company are not able to, since they were not put on the subscription service. If I upgrade will they still be able to open my files or can I back save to a previous version? I know I can save it as different file type, like .iges or .step, then use feature recognition. But I need them to have full editability to sketches and features.
View 9 Replies View RelatedCan I open 2012 .dwg files in 2013 and have all the settings styles and all the 3D data? 2013 Civil 3D
View 3 Replies View Relatederror messages that say I can't use various functions because the file has objects from a newer version. I have ACA 2012 and the file is from ACA 2013.
Isn't there a way to convert or eliminate these 'objects' so I can use these files 'normally' in 2012 ACA?
how to import Mechanical Desktop 2009 files into Inventor 2012
View 1 Replies View RelatedI was trying to figure out the best way of loading an external WPF executable assembly into Autocad. The scenario is simple though to explain.
The user enters a command in Autocad. The command invokes a WPF application, which loads a particular WPF Window. The command also need to pass a parameter to the WPF application when it requests the WPF Window to load. When the user is done with the Window, he closes it like any modal window that appear in Autocad. What are the possible ways to have such an interaction in AutoCAD using .Net and C# and WPF
I can't get iLogic to load on my laptop. If I select Tools - Add ins then iLogic shows as load automatically but currently unloaded. If I check loaded, close the dialogue, open it again, then it has gone back to unloaded.
On my desktop, if I check unloaded then iLogic goes away, but if I select loaded it comes back. Similarly, I can turn on/off any of the add-ins such as the Design Accelerator, BIM Exchange, etc at will.
On my laptop, I can load/unload anything except iLogic, which won't load.
Both machines are Dells, running NVIDIA graphics under XP x64. Inventor Pro Product Design Suite was installed on both machines at about the same time from the same installation files. The only difference is that my laptop has Service Pack 1 installed, the desktop machine doesn't.
I was working on setup up several camera animations in a file. I saved the file, and put the settings in for all 4 cameras to render. I started Batch Render running, it saved, began rendering the first frame and then Maya crashed. It was able to save a .mb version as it was closing. I have since been unable to get either file to open correctly.
If I try to directly open the files, they load 100%, the status bar immediately switches to "Writing <username>.20110503.<time>.ma" and the Crash Reporter appears before the viewport can even update and show the model.
If I try importing either file into a new document, it will load completely, and a dialog window pops up with: Could not save file"/var/folders/FL/FLo7J2o4H4OV9SDiREDU4U+++TI/-Tmp-/thompirson.20110503.1216.ma".
If you click OK, Maya crashes without the Crash Reporter opening.
My work helpdesk has recently installed AutoCad 2012 and my co worker and I noticed that at the start up its loads very slowly and often when we double click on a DWG to open (without Autocad being already open) it crashes.
View 2 Replies View RelatedOn starting autocad, before anything else appears an error box pops up saying "Unable to load Profile file, some profile information saved in the last session may not be restored". Click to accept the message and autocad starts normally with the exception that the ribbon doesn't show -at all. The user then switches to the classic workspace and back again and the ribbon will appear as expected.
The user, I believe, has local admin rights. I've tried uninstalling and reinstalling to no avail. My next step, is a last resort, which will involve uninstalling, then using some kinda registry cleaner to erase any trace of autocad on the laptop, then reinstalling - this is a bit severe, and will require the co-operation of my own IT dept, which can be like pulling teeth. I'm wondering if there's any other, less time consuming solution to this irritating problem?
ACad, MEP, 3DS Max
Windows 7x64
X5482 @3.2Ghz 8Gb Ram
Quadro FX1700
How to load the content library for 2012?
View 2 Replies View RelatedWorking with inventor pro 2012, whenever I try to run a macro, the program freezes. It happens when I press the tools/macros buttonand it can take 30 sec or more before the macros dialog release and active or I can try to run windows job list which seems to release the jam too.It also happens when I try to run my macro with shortcut key or customized button. It freezes before the macro even loads. If I open the macros editor and run the macro from there (run sub) then there is no delay at all!
Autodesk Inventor 2012 SP1 64-bit, win 7
What the inventor addin load sequence is. I want first load addin and then load another addin what i create it.
View 1 Replies View RelatedWorking with inventor pro 2012, whenever I try to run a macro, the program freezes. It happens when I press the tools/macros button and it can take 30 sec or more before the macros dialog release and active or I can try to run windows job list which seems to release the jam too. It also happens when I try to run my macro with shortcut key or customized button. It freezes before the macro even loads and it is very frustrating. If I open the macros editor and run the macro from there (run sub) then there is no delay at all!
Autodesk Inventor 2012 SP1 64-bit, win 7
I'm a school teacher in the PLTW program that uses Inventor extensively in my classroom. Our district operates under a 125 seat license. The issue I've run into is on my personal computer (Windows Vista, x64) and is therefore outside the realm of the usual IT guy's duties. The Inventor software was installed on my laptop by the PLTW training staff during my summer session. I *think* it is a stand alone install of the program.
What happens is after I launch Autodesk Inventor, I can see the splash screen, and the inventor.exe task appears in the task manager, however after a few seconds, the splash screen disappears and the program does not launch. There is no error message.
This is confusing since until quite recently I am sure that Inventor was working hunky dory. Also, all the other Autodesk programs seems to function normally (Fusion, Design and Review)
I've tried a repair and reinstall, but the problem still persists. Also, I updated the install with SP 1, but this had no effect either.
I have recently updated my display drivers (ATI Radeon), however, I tried reverting back to the older drivers and still the problem persists, so I don't think it is graphics driver related
2012 showcase starts to load and then shuts down.
View 3 Replies View RelatedI have a fairly new DELL PC that meets all the minimum system requirements. I am running Window 7 and I can't get Autocad 2013 demo to run. It says install successful but when I try to run it it just hangs up and says "First run Initializing" and never loading. This is the first program that won't run I've ever had with this new computer.
View 5 Replies View RelatedI just upgraded to a 5D and LR4.. when I import the files load as CR2 files, not DNG files. When the files import it takes 4 files to find them. It also will not recognize the file names in the library. How do I fix this to import like it did in LR 3??
View 2 Replies View RelatedSo I was working in AutoCAD at work and this Error Message showed up. I don't know how to load my drawing because everytime this error message comes up AutoCAD shuts down.
View 1 Replies View RelatedI can't load some xrefs in 2013 that I can with 2012. Identical new machines within the last week.
I get an invalid message for some not all. Is it the 2013 jinx?
I just installed AutoCAD 2014, but it's not pulling my custom .pgp file, even though the folder that file is in is first in my support path.
System specifications: AutoCAD 2014 64-bit SP1, Windows 7 64-bit SP1, Intel Core i7-2600K, AMD FirePro V4900
16GB RAM, Crucial M4 SSD, 3 Dell Monitors (2 30" 2560x1600 & 1 20" 1200x1600)
I have an addin that needs to load when the autocad loads or when user type the command. It works fine with autocad 2012 but does not work with 2013. The addin dll is located in %appdata%autodeskApplicationPlugins. If I use Netload command to load the dll in 2013 and it works fine. But I need that addin to load either when user type the command or when autocad start up. I have checked the [URL]
View 9 Replies View RelatedI just down loaded the new autocad 2014 yesterday and I have no ribbon. If I go to tools - palettes - ribbon, an area where the ribbon should be opens up with the message "the ribbon does not have any tabs or panels currently loaded".
How do I load the tabs and panels?
I downloaded importskp plugin and installed for Autocad2013, but could not load it.
I tried to restart Autocad, and also appautoload command but couldn't solve the problem.
I have tried to load a custom line type from Autocad 2013 to Inventor 2013, through Edit Laver-->Line type -->Other --> Load, but it doesn't appear in the drop-down list. I have read that previous Inventor releases coudn't work with autocad custom or complex line types. Is it still like that?
View 3 Replies View RelatedI have a project in my PC, and build it to file ".dll". It is working fine in my machine with "netload" command (to load it).
But in another PC "Netload" command can not load it . How i can load Dll file on other PC?
Out of action on CS2 for over a week now. I 'rolled back' to an April restore point. Still no success but different messages.
Programme loads then: Could not load default gradients because the file could not be found.' Then same with, Patterns, Contours, Styles, Custom Shapes and tool presets. Finishes up with Could not initialize Photoshop because a required text resource file is missing.
After restoring to an earlier date duplicates of some of the folders have been made.
WXP SP2 CS2 1GB RAM.
I just loaded AutoCAD 2013 and have loaded Express tools but can't access the tools.
I get a message when I open dwgs "**Express Tools** - Unable to load acetutil.arx"
In fact I can't load any .arx files.
when I try to use the VIEWBASE command to create views from my 3D solids, I always get the message "inventor server failed to load" and the command stops. I am using AutoCAD 2014 with SP1 installed on windows 8 .
In a similar message in the 2010/2011/2012 discussion group: URL....
it is suggested to reinstall the software, but this is not working for me.I have already tried to 'repair', 'reinstall' and completely remove all the software and then reinstalling it, but nothing seems to fix this problem.
Are there any other programs I need to have installed to get this command to work?