I'm using LT 2011, and have made the following macros to move a piece of text onto the same Y value as another piece of text, but keep the X value as is:
^C^C_move;;.x;0;_ins;
^C^C_change;;.x;0;_ins;;;;;
The first macro works fine but the second brings up the message 'Point or option keyword required'.
I use point filters allot when measuring distances. I noticed today using Full CAD 2010 that when i measured a distance (Say 2m) using a "Y" point filter, between two objects not directly below one another the answer i got was wrong. It seemed to give me the distance of where my crosshairs where at the time of finishing the command.
I have tried this on another full system of CAD 2010 and a light version. Problem occurs on all.
I know that if you just measure between the points CAD will give you the (-Y) answer in the command line, but using point filters is an old habbit hard to kick.
I downloaded and installed GIMP 2.8.8 in Windows XP. The Filters menu option shows only Repeat last, Re-show last and Reset all filters.Nothing else in there. Where are the filters?
View 1 Replies View RelatedI have made some macros and now with the 2012 version of Inventor it is very very slowly to open the dialog box to choose a macro. I have the windows cursor during 30 second in each time I want to select a macro.
When I have made a shortcut for one of my macros it goes good and quikly.
All of a sudden, my action macros aren't working. I'm getting "Unknown command" errors. I've checked my options, everything's pointing to the right folder, and the macro files are in the right folder. Why would I be getting this error?
View 4 Replies View RelatedI have hardly ever used filters for any of my work as I have preferred using Xara's native tools and effects to get what I wanted. But recently, I was inspired by some animation work which used backgrounds painted in Photoshop. They used a lot of textures which enhanced the look of the animation and so I thought I'd try to simulate it within Xara.
It works very well and I can export it as a PSD retaining the layers and Alpha channel. But here come my questions.
1. How can I remove the two Alien Skin demo plugins as I already have the full versions.
2. Why don't the native Photoshop plugins--Artistic, Sketch, etc.--seem to work?
In CS3 you could change something to make all filters act like smart filters, even though they won't. I found this worked very well, now I have CS4 and would like to do the same but can't remember what to do to make it work.
View 6 Replies View RelatedI just downloaded a bunch of filters and I dragged them into the filters directory under plugins, but when I open photoshop, none of the filters are there.
View 4 Replies View RelatedMacros in inventor drawing are not activating or it is not automatically generating vba codes.
when creating macros and i assign dimensions to objects but the macros are not generating any codes.
Something strange happened recently where in order for my Right-Click Menu commands to work properly, and the double click ddedit to work, I had to take the "^C^C" out of the macro. All my related variables are set correctly, PICKFIRST, DBLCLKEDIT, etc...
What is happening is, I would get a selection set, right-click, copy with base point. Normally because the selection set is there, once a base point is selected, the command ends. In this case, after specifying the basepoint, I am asked to select objects again... This goes for ALL right click menu commands. Command line input is NOT affected.
Toolbar macros I've been using for several versions now are not working in LT 2013?
Here an example of one of the macros:
^C^C_select;_auto;\_copy;_p;;@;@;_move;_p;;\_rotate;_p;;@;\_redraw:
Inventor 2010:
when i create a note in an assembly (accidentally, we never use them), all my macros refuse to run from the buttons in the "User Commands" panel.
Why? Bug? What's happening to cause this? Can we programmatically remove or disable the "Create Note" option from the right-click menu?
If I set a keyboard shortcut for a macro, it will function properly until the session is closed. When Inventor is opened again, the shortcut will not be on the keyboard customization list. So far, all shortcuts for regular Inventor functions, and even Add-Ins, will stay present when the session is closed and opened. I've been able to reproduce this on a co-worker's computer, so I don't believe it is an issue related to my system.
Edit: Forgot to add, using Inventor 2012
Working with inventor pro 2012, whenever I try to run a macro, the program freezes. It happens when I press the tools/macros buttonand it can take 30 sec or more before the macros dialog release and active or I can try to run windows job list which seems to release the jam too.It also happens when I try to run my macro with shortcut key or customized button. It freezes before the macro even loads. If I open the macros editor and run the macro from there (run sub) then there is no delay at all!
Autodesk Inventor 2012 SP1 64-bit, win 7
Short of converting to an add-in is there any way to place macro's into toolbars where you can set the Text of the button to something other than the macro name?
I mean, while to those who write them, there's nothing wrong (really) with a command button titled Invoke_This_Fuction or InvokeFunction, it looks quite odd to everyone else.
If the only way is via add-in, that's fine (though a friendly display name should be an option). Just trying to find out before I spend a boatload of time only to figure out you can't
Also, do all add-ins 'have' to be installed? Or is there a way you can just drop a file in the correct path and it'll appear on next running of Inventor?
I have a users machine that is displaying some odd behaviour. Their Macros and VBA Editor buttons have stopped working. We have tried several things already but nothing appears to have any effect.
View 9 Replies View RelatedWe have a problem at work with buttons disappearing from the quick access toolbar.
I already looked around and it is being said that it is a bug, wich can be fixed with a service pack. I work in a big company, and they are refusing to do the service pack.
So the next best thing I can figure is to make a macro, wich will add all the macros I want to the quick access toolbar in assembly level, part level, sketch level and drawing level.
Working with inventor pro 2012, whenever I try to run a macro, the program freezes. It happens when I press the tools/macros button and it can take 30 sec or more before the macros dialog release and active or I can try to run windows job list which seems to release the jam too. It also happens when I try to run my macro with shortcut key or customized button. It freezes before the macro even loads and it is very frustrating. If I open the macros editor and run the macro from there (run sub) then there is no delay at all!
Autodesk Inventor 2012 SP1 64-bit, win 7
I am working on a dormitory project and need to provide a required light and ventilation schedule. I have figured out how to create a schedule for each level, but I want to isolate only the Dormitories and the Kitchenette (weed out all the other rooms such as corridor, elevator, storage, toilets, showers, stairs, trash, electrical, etc.).
I tried using seclusion filters, but there are too many items to exclude and cannot fit them all into the 4 filter categories. I am trying to just get the rooms that begin with 'D' and 'K'. I tried providing the variable 'Begins With' for D and in the next line 'Begins With' K, but then nothing shows up.
Is there a way to provide information to the filter that would allow it to show only rooms beginning with D AND K? I cannot seem to get it to work. I have been playing around with separation values within one filter category (i.e. 'Begins With' D, K) but apparently you cannot add multiple variables within one of the filter items.
I have created the following keyboard macro:
^C^C_.MOCORO \ C X R
It launches move-copy-rotate, allows me to pick 2 items (in my case a electrical symbol and its associated tag), copies the entities to the desired location then rotates. It works perfect, however after the rotate I need to repeat the process indefinitely starting before the "C".
I know that I can usu an asterisk at the beginning to loop the entire macro, however I don't want to re-select, just continue on with the MCR function using the already selected entities. Any GOTO function in macros?
I suspect that I might need LISP for this but I not familiar with writing that code.
How to create macros of a drawing and then hw can we change the drawing by editing the macro. E.g.. I have drawn a circle of 30 mm dia.. than need to crate macros for same and then by changing the dia of circle in macros I want to create new circle of 50 mm dia.
Another thing I wanted to ask is what is difference between visual lisp and visual basic. Which is easier??
I am using AutoCad 2012, with CADDUCT. On my runs of duct that go vertical, I like to stack my tag numbers beside the riser in order, so our installers can easily identify the order without a ton of section views. I am trying to figure out a macro that will do numerous things. Since my tags come out at different rotation angles, I would like to do the following commands.
Rotate object text "TAG #" to 0 degrees
move object text "TAG #" to "Snap from" & "snap insert" 6" below the tag above it
I want the numbers to align by their insert locations up and down the page, and exactly 6" on center vertically from one another. The tag numbers have a node justified to the center up and down of the text.
I'm thinking of my next out lines for Master Classes and I have been asked about doing a Max Script 101 class. So a raw beginner class into script for those that have never done it in any language. This would cover what Max Script is, how to run Macros and scripts, how the editor and listener work and then get into the basics of creating useful scripts. Variables, arrays, simple functions.
View 9 Replies View Relatedhow to create macros in gimp 2.8.
View 1 Replies View RelatedI've deleted my test macro from my .CDR file via Tools -> Visual Basic... But after closing Corel and opening that file again, it says that it "contains macros"
View 2 Replies View Relatedmacros are all disabled and i remembered there is a command to disable all the events but i could not figure out where exactly it is located and even i tried to reinstall the using modiy and repair twice times to install the software but still persists to activate the macros.
all the macros are grayed out and even Alt F11 also not working.
Have new pc want to move macros... Have exported workspace but Macros did not come...
View 1 Replies View RelatedAssigning shortcuts to macros? I did some but now the option to select macros has completely disappeared.
Correction - all my macros have disappeared. The macro manager is showing up empty. It's as if X6 can't see any macros at all. Delay Load is unchecked.
Just noticed the file name window is named "trial expired" - yet I can open a file.
Been meaning to make some more videos. Here's one I made today pertaining to looping.
[URL].........
[URL]......
[URL].........
I am trying to switch from X3 to X5, I moved my macros to the X5 GMS folder but the macros don't show up under "Macros" in the customization dialog. I can do Menu>Tools>Macros>Run Macro... and run a macro like that but I would like t be able to assign shortcut keys to the macros and create tool bars, but so far no luck with that.
View 6 Replies View RelatedI installed the X5 suite and updates, set up my macros, and everything was working fine. When I restarted Coreldraw, all my macros were disabled? I uninstalled, rebooted and reinstalled, and the same thing happened again. Everything works fine in X4.
My OS is Vista Home Premium with Service Pack 1.