CorelDRAW Graphics Suite X6 :: Shortcuts For Macros
Mar 25, 2012
Assigning shortcuts to macros? I did some but now the option to select macros has completely disappeared.
Correction - all my macros have disappeared. The macro manager is showing up empty. It's as if X6 can't see any macros at all. Delay Load is unchecked.
Just noticed the file name window is named "trial expired" - yet I can open a file.
macros are all disabled and i remembered there is a command to disable all the events but i could not figure out where exactly it is located and even i tried to reinstall the using modiy and repair twice times to install the software but still persists to activate the macros.
all the macros are grayed out and even Alt F11 also not working.
I am trying to switch from X3 to X5, I moved my macros to the X5 GMS folder but the macros don't show up under "Macros" in the customization dialog. I can do Menu>Tools>Macros>Run Macro... and run a macro like that but I would like t be able to assign shortcut keys to the macros and create tool bars, but so far no luck with that.
I installed the X5 suite and updates, set up my macros, and everything was working fine. When I restarted Coreldraw, all my macros were disabled? I uninstalled, rebooted and reinstalled, and the same thing happened again. Everything works fine in X4.
I'm wanting to cut a shape out of a rectangle from a macro. I need to do this on hundreds of files. I tried to do the following while recording a macro:
Select all shapes Run Arrange->Shaping->Back Minus Front
However, this just results in this comment being recorded: "Recording of this command is not supported: ShapingCommand"
How to call the shaping commands from VBA? I've dug through offline and online documentation and have come up with nothing.
Still on the basics, here's a demo video that includes adding a macro form and sizing of some selected shapes. I had fun doing this one but it's hard trying to squeeze everything into a short video (to keep video file size low).
I found Oberon Fit Objects To Path as a very interesting macro and i tried to download it.I have downloaded the zip file from Oberon website , but an Error showed up on my screen saying: "Unable to find CorelDraw x5 installation"...
I know the reason for this is because of the x5 version, which i don't have in my system.But i have also downloaded some other macros that are x4 or x5 versions and they are working excellent on my CorelDraw x6.
Any other macros similar to the "oberon Fit Objects To Path" macro?
In my windows fonts folder all the fonts have shortcuts and very few have not. what is the problem with and how i should have the fonts without shortcuts and i usually install fonts using bistream font navigator.
Sometimes though fonts are existed , when i open files in coreldraw font matching systems dialog comes in and says that font is not installed choose the appropriate one .
Sometimes in coreldraw the fonts moves side ways and i am unable to place my cursor wherever i want exactly.
when I click on an object from the object manager... then I want it at the top of my drawing
so I hit Shift+PageUp
(or Ctrl+PageUp)
instead of working... it takes me to "Page 1" at the top of the object manager
HOWEVER, if I click on the thing from the canvas, it works...
this is a silly bug... the whole point of me selecting it from the object manager is so I don't have to hunt for it... because it's UNDER some other stuff.
... that's why I want it shifted to the top of the layer.
As far as I know this problem is reproducible... I'm using a circle and it's under a bunch of stuff like rectangles. I can be more specific if necessary, but it's pretty basic.
Can we set shortcuts for different positions like alt +f8 for moving the object right relative to its position, alt+f9 for moving the object left relative to its position?
I am trying to change/add some shortcuts in the customization dialogue but are unable to remove/find/overwrite the conflicts. checking the navigate to conflicts makes no difference, see the attached images. I don't understand how "conflicts with multiple shortcuts." can be correct? How can there be several identical shortcuts in the main table? This is a new installation and everything is updated.
I am considering a move from Photoshop and Illustrator to Photo-Paint and CorelDraw. My biggest hurdle is that I use the spacebar for panning around a document and CTRL-Spacebar for zooming.
Can the Corel products be set up to use the spacebar for a pan hand?
I use ctrl+ the number pad to change the point size of fonts. I just got thinking, it would be nice to use the same commands for making the current selection larger or smaller too. Maybe 2 and 8 would be down and up by 1 percent of current size and 4-6 could be 1% of original size. 5 would be 'return to 100% of original size.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
If I set a keyboard shortcut for a macro, it will function properly until the session is closed. When Inventor is opened again, the shortcut will not be on the keyboard customization list. So far, all shortcuts for regular Inventor functions, and even Add-Ins, will stay present when the session is closed and opened. I've been able to reproduce this on a co-worker's computer, so I don't believe it is an issue related to my system.
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
Often whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
i´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
Entire Corel suite freezes on start up - I cannot do anything. Reinstalling also does not work - suddenly buttons on the installer dissapeared - there is no text on them and when I click them nothing happens.
A week ago I have installed service pack 3 and everything worked fine. It has all gone wrong again. And installation of the latest patches does not work anymore.
I am running Windows 7 64-bit and I've got a feeling that is must have something to do with system updates.
I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
How on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
I have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
I just used the help file for the first time in ages and noticed all the links to the graphics are broken hence no diagrams etc. I tried to search out where they are usually stored and it gives some weird Address under properties. It's a vba so suppose it's a database? How do I restore the links without having to do a re-install?
As to the pen: How do you stop the annoying over-the-top predictive curve that happens past the node in the next section after a long drag to form the first curve. i.e. you simply want to draw a straight line after dragging out a curved section previously and you get this unmanageable curve to deal with ?