Paint Shop Pro :: X4 Paste From Clipboard
Nov 18, 2011
I copied a file from my Card Program and then pasted it into X4. Besides the quality being shocking the end section of the image was pasted at the beginning, which I saw mentioned in another post.
But the same clipboard image pasted perfectly in PSPX and PSPX3, so the problem is not with the image nor with the Card Program.
Below is the image shown pasted in X, X3 and X4.
Has this been addressed and/or reported or is there a fix. This is extremely poor standards and obviously is from incorrect programming in X4. Not impressed.
Plainly clear one cannot have only X4 installed to work with as it still has many bugs that have not been rectified.
View 14 Replies
ADVERTISEMENT
Nov 8, 2012
I somehow lost the toolbar with the "copy to the clipboard" and "paste from the clipboard" icons.. which tool bar i need to turn back on?
View 2 Replies
View Related
Mar 7, 2013
How do I import the clipboard in PSP Pro X5? It was one click in PSP 3.
A highlighted window is written to the clipboard by pressing alt+PrtScn keys. I bought new PSP Pro X5 for my new Windows 8 Dell XPS machine.
View 1 Replies
View Related
Dec 1, 2011
Pasting from Clipboard problem.
Did a screenshot JPG
Right clicked it and copied it (Win7-64 clipboard).
Started PSPX4 SP1.
Cannot paste .. paste options greyed out.
So I drag/drop the jpg into X4-SP1 ... works ok.
Also, opening the file in X4-SP1 works ok.
Tried another Copy/paste with another app .. PaintDotNet.
Pasted from Win7-64 clipboard ok.
Plug Ins and tablet installed.
KPT filters
NIK Color Efex Pro 3.0
Wacom Intuos4 Tablet
View 13 Replies
View Related
Oct 7, 2011
Running on XP pro SP3, all updates.
I purchased and installed PSP X4 ultimate (14.0.0.332), having first removed all traces of previous versions.
Install went fine and everything I've tried so far works as expected but I found one minor, if irritating bug:
I had retained in My PSP files a number of picture tubes, some of which, it turned out, were duplicates of those provided in PSP X4 and the Ultimate contents pack. So when I first checked the picture tubes, the usual window popped up listing the duplicates it had found, with the button to copy the list to the clipboard. However clicking on that button, the only thing that was copied to the clipboard was the first letter of the first entry in the list, not the whole list, as worked properly in X3 and earlier.
I then manually searched for and deleted the duplicates (which a copy of the list would have made much less time consuming, of course). To test that this was a reproducible bug, I then deliberately crated a new set of duplicates (simply by copying one of the subfolders in C:Program FilesCorelCorel PaintShop Pro X4Corel_10 to a subfolder in My PSP files picture tubes folder). Again the list of new duplicates showed up, but clicking copy to clipboard again only the first letter in the first item on the list was copied.
View 3 Replies
View Related
Dec 1, 2013
Why is it necessary to have an image open before using the "Paste as New Image" function.
I want to be able to copy an image from another program and paste in into PSP for editing. I can only do this if I first open a new or existing image in PSP before doing "Paste as a New Image".
View 1 Replies
View Related
Dec 4, 2011
I have just upgraded to PSPX4 from X2, but have been using PSP since it was a JASC product. So far I am not very impressed with the new version. My first stumbling block was when I couldn't increase the canvas size on a photo that I'm restoring (9120w x 13298h). A chat session with Corel identified the issue as being a 10000 pixel limitation now being imposed. Although I can work with images >10000, I can't increase any dimension past this figure. Who had that brainwave? I had to put my image into PSPX2, increase the canvase size and then load it back into PSPX4 to continue.
Now today, another issue pops up. I can't seem to find other hits on pasting selections within the forum though, so I am raising this.
I loaded two tif images into my Edit workspace. One image is fairly small and I copied this, switched to the larger image and tried a 'paste as new selection'. This worked OK. The I switched to a paintbrush and made a small change to the main image. I then tried pasting the copied image again with 'paste as new selection'. This time the program locked up with Windows trying to find a resolution. PSPX4 then crashed. I have tried various scenario's to narrow the cause down. So far it seems that I can paste a new selection as many times as I want, but as soon as I use a paintbrush to effect even a small change PSPX4 locks up. It either then crashes, as explained earlier, or I get the round no operation mouse cursor displayed. At this point the main control box buttons (close, minimize etc.) won't respond, neither can I switch to the Manage or Adjust areas. The menu trees respond, but selecting File/Exit doesn't work. I have to use Task Manager to close the program.
I had installed SP1, but trying to identify the cause of this issue I uninstalled X4 and reinstalled the base version from CD (332). All settings were left to default. This is how I am running now, so it looks as if SP1 makes no difference. I have also tried using jpg instead of tif, but this also makes no difference. At the moment I'm thinking of ditching X4 and going back to X2.
I am running Windows 7 Ultimate 64 bit with 8Gb RAM.
View 1 Replies
View Related
Sep 8, 2012
I've been using PSP since 7.
Now I'm using x4 and I noticed that when I cut/copy a portion of a pic and then paste it as a new image....then I want to copy and paste that portion back into the original photo using paste as new layer....the icon doesn't change automatically from the lasso/cut tool to the move tool.
It used to do that automatically in psp 7 so that right after I paste as new layer, i can move that portion around right away.
In x4, after you paste as new layer, you can't move that layer around because it hasn't changed automatically to the move tool. I have to manually click on the move tool everytime I want to move the layer around. It's very irritating!
Any settings I can change to make it automatically change to "move tool" right after pasting a pic as new layer?
View 14 Replies
View Related
Aug 1, 2013
When I Select All/Copy a photo to Paste as New Layer on top of another photo, it always pastes as a humongous image. I have to scroll & scroll & scroll down to find grab handles, then fiddle & fiddle resizing the image to the same size as the underlying photo. I take the photos with the same camera. Seems to me the photos ought to be the same size!
View 3 Replies
View Related
May 23, 2011
I've been having a recurring problem with Paint Shop Pro X3. When I try to paste a selection into an existing image, it cuts off the bottom 5-10 pixels. I hover over the existing image with my selection, and the entire selection shows up -- I move it into place, and once I paste it on, it cuts it off -- here is a screen shot -- left side shows full image when still 'selected' -- once I right click it cuts off a part of the bottom portion.
This is a piece of another image being pasted into a blank, new image. They are sized the same height (though that doesn't matter) and after paste, chop chop.
View 2 Replies
View Related
Mar 24, 2011
I have a two layer image:
layer 1. background
layer 2. A transparent vector layer with text
I have a second image, the same exact size and resolution as the first two layer image. I would like to paste layer 2 from the first image, into the same exact position on image 2. Every time I paste. it centers the text, whether it is just a ctrl-v, or a paste layer. I've even tried promoting the layer 2 in the first image then pasting as new layer into image two, with no luck. Everything I've done pastes layer 2 from image one, into the center of image 2.
I have PSP Photo X2
View 7 Replies
View Related
Jan 11, 2013
I have had this problem many times with both CS6 and CS5. I'm not sure if this is a Photoshop question or a Windows OS 8 question but anyways it seems to only happen with Photoshop.
I copy an image offline to edit in photoshop. After I'm finished I save it and delete the image layer from the workspace to get ready for the next image. I grab another image that I want to paste in the same photshop workspace. When I paste, it pastes the same image I copied first. It even does this when I restart Photoshop, so that's why I think it may have to do with Windows Clipboard.
I'm also really interested in details about how 'Copy/Paste" and the "Clipboard" work with different programs so I can best understand how to utilize it with what seems to be a simple tool, yet I still find myslef with questions because I don't filly undertsnad it.
View 5 Replies
View Related
May 20, 2011
When using the Clipboard to move entities from one drawing to another I need to open the window Tools; Options; and that's it for the Paste as Block and Paste Options to be available. What I mean is do I need to do this with each new session of LT? That I will need to check out. I tried my Template and it allowed Paste without going to the Options Dialog in the same session.
Object selection limit for display of grips is set to 32,000
View 9 Replies
View Related
Aug 13, 2013
Recently I started using AutoCAD 2012 and I ran into one problem which I didn't encounter before.
The problem is that when I try to paste objects from another drawing (through clipboard - usually another instance of AutoCAD) I can't paste them in some drawings only.
The following things happen:
-Autocad behaves normally like when I usually paste objects except there is nothing inserted.
-When I save the drawing after unsuccessful insert, even if I canceled inserting, drawing size increases dramatically (for about 2-4MB).
-If I open new drawing, I can insert objects there.
-Also when I copy to clipboard, autocad takes a lot of time even if it is only few lines.
I tried these thing to fix issue:
-I checked if there are any layers turned off.
-I tried to copy with COPYBASE
-I restarted autocad (sometimes it works but only for some moments or for one insert).
-I did PURGE and AUDIT
-I tried to copy paste in same instance of AutoCAD but that didn't work.
I'm usually using t least 2 instances of AutoCAD (I hope that is not the problem).
View 7 Replies
View Related
Nov 20, 2013
I'm a relative noob to GIMP. Long time Paint Shop Pro user who has gone over to a Mac Book. I'm very frustrated by my inability to paste more than one layer at a time. Meaning, that I paste a layer from the clipboard into an image I am building, but I cant copy a new image to paste in without shutting down the program & reopening....Otherwise the same image keeps trying to repaste.
View 7 Replies
View Related
May 9, 2013
I am having an issue while trying to copy/paste via clipboard. I copy (with or without basepoint) on one drawing then try to paste to another drawing using ctrl v. the first two times, the object pastes. On the third attempt my cursor looks like it is trying to paste something and if I move near an object on the drawing it snaps to points, but no object pastes. After doing so I check my layer manager and the layers involved with this action do paste. After a few attempts with no luck, a weird object I have never seen before appears.
I have tried to purge and audit as well as copying the whole drawing to a new drawing but have had no luck.
Side note, after ctrl v is pressed (or ctrl shift v) the command line says something about duplication of some block name ignored.
View 2 Replies
View Related
Jun 11, 2012
I just got Gimp 2.8 for Mac. I can open a picture, do a blur and export. The copy paste is giving me problems. It worked once. I make a selection with the rectangle and do a control c. I also tried the menu. The selection doesn't go to the clipboard. After 6 tries, the same original copy was the only one in there.
View 1 Replies
View Related
Dec 20, 2012
I've just installed CorelDraw X6 onto a W7 PC. Pasting bitmaps from clipboard is not working. Nor is bitmap editing when a bitmap has been imported into a document. I've loaded X6 onto two other computers with the same result (or lack of).
View 9 Replies
View Related
Mar 20, 2013
You can copy both the surface and the original (in this case contour polylines) data or only the surface. In both cases paste operation results into a copy of both data and surface.
Ok, But when paste and rebuild, the distance from original base point and destination point is applied in turn to the surface itself. Maybe it is a BUG ?
Civil 3D (2013)
View 2 Replies
View Related
Aug 6, 2012
You'd think that being able to copy and paste would be a fairly straightforward task in any piece of software. Not in AutoCAD 2013. The Help file says the commands are located on the 'Clipboard' panel, under the 'Home' tab. I've spent a lot of time searching and can't find them, nor can I find any information about how to turn such a panel on.
This is the sort of thing that shouldn't be a problem in a well-designed piece of software. We're finding AutoCAD 2013 to be almost unusable out of the box, and have to spend ages fiddling with the (clunky) Custom User Interface commands to make it work. Every time AutoDesk bring out a new version of AutoCAD it seems to get even worse. I could resort to keyboard commands, but shouldn't have to. I'm starting to think the best solution would be to invest in a copy of Vectorworks instead.
View 6 Replies
View Related
Jul 7, 2011
My primary graphics tool is Paint.Net, but I have found an inadequacy for what I am doing.
Paint.NET copies data to the clipboard in the following formats
PaintDotNet.MaskedSurface
Format17
System.Drawing.Bitmap
Bitmap
DeviceIndependentBitmap
found by examining data.GetFormats() in C#. I cannot use PaintDotNet.MaskedSurface in my application and the others don't provide full transparency information for PNGs. Is there a way to have Paint.NET copy data to the clipboard using "PNG" format?
In my app, I can copy an image into the clipboard using the following code, and all transparency information is retained.
using (MemoryStream stream = newMemoryStream())
{
_Bitmap.Save(stream, ImageFormat.Png);
var data = newDataObject("PNG", stream);
Clipboard.Clear();
Clipboard.SetDataObject(data, true);
}
and I can read the same from the clipboard using the following
IDataObject data = Clipboard.GetDataObject();
if (data.GetFormats().Contains("PNG")){
MemoryStream ms = (System.IO.MemoryStream)data.GetData("PNG");
_Bitmap = (Bitmap)Bitmap.FromStream(ms, true);
}
View 5 Replies
View Related
Oct 3, 2011
How do i merge one picture into another and then save it? How do i save images to clipboard?
I have noticed you can change the background colors.What if i want to use an image as a background instead?
View 4 Replies
View Related
Jun 16, 2012
would it be possible sometime in Paint.Net to save/export to the clipboard the history box as a text list of what we did ?
since I use many effects and settings in a given PDN, I sometime wants to write me some notes about how i did something and the steps i used to do it, before my old memory lets me down.
I know that the PDN it self has the history, but now I need to go over all the list and manually write/type down in notepad the list , which most of the time is very long.
Having the ability to save/export the history box text to a file or to the clipboard, make it easy to edit the list and keep track/notes of steps and ways to do something.
I don't need the settings used in the effect/adjustments , but just the TEXT names of the steps taken as shown in the history box.
View 6 Replies
View Related
Jan 30, 2009
The old "paste in place" function seems to be missing in CS2 (gosh i miss Shop 7 sometimes).. any idea of workarounds that aren't more than 2 steps?
moreover: I have a selection, want to cut out or copy and place in the exact same place (either in same layer or new). Sometimes it works, sometimes it don't. I can't tell why it works only some of the time.
View 1 Replies
View Related
Dec 24, 2011
Just came upon an error I had not seen before. Though PSP no longer supports Animation Shop, up until PSP X4, the user has been able to export frames back to PSP from Animation Shop. Now, this no longer works! There's still some communication there, because an error message - which, incidentally, makes absolutely no sense at all - is generated in PSP X4:
View 2 Replies
View Related
Oct 28, 2011
I installed PSP X4 today on a new PC with Windows 7 and noticed that it has no Animation Shop. Can I install Animation Shop to this machine? Will it work without PSP 9 or does it need certain dlls from PSP 9 ? I really want to be able to use Animation Shop again.
View 7 Replies
View Related
Sep 25, 2012
Is there a Print Layout in X5 similar to that in Paint Shop Pro?
View 1 Replies
View Related
Apr 9, 2011
My program worked just great, then all of a sudden the paint brush and eraser will not do a thing.
View 14 Replies
View Related
May 26, 2011
I was wondering if there is a way to always paste to a new layer?
View 2 Replies
View Related
Dec 5, 2012
I created my first project that consists of 4 layers and saved it! However, when I tried to paste it into a Word doc only the background layer (a photo) shows up without the other 3 layers containing writing.
View 2 Replies
View Related
May 9, 2013
I literally downloaded this program today, but I like it so far. However, I'm currently attempting a small new project and it seems I've hit a wall.What I'm trying to do is take a picture of a silhouette, remove the white background, and somehow change the black silhouette into a plaid pattern so I can paste it on top of a new background of my choosing. I've already figured out a satisfactory method for removing the background by perusing the forums here, but I've yet to come across a topic to solve my current issue.
View 3 Replies
View Related
