When I Select All/Copy a photo to Paste as New Layer on top of another photo, it always pastes as a humongous image. I have to scroll & scroll & scroll down to find grab handles, then fiddle & fiddle resizing the image to the same size as the underlying photo. I take the photos with the same camera. Seems to me the photos ought to be the same size!
View 3 RepliesI've been using PSP since 7.
Now I'm using x4 and I noticed that when I cut/copy a portion of a pic and then paste it as a new image....then I want to copy and paste that portion back into the original photo using paste as new layer....the icon doesn't change automatically from the lasso/cut tool to the move tool.
It used to do that automatically in psp 7 so that right after I paste as new layer, i can move that portion around right away.
In x4, after you paste as new layer, you can't move that layer around because it hasn't changed automatically to the move tool. I have to manually click on the move tool everytime I want to move the layer around. It's very irritating!
Any settings I can change to make it automatically change to "move tool" right after pasting a pic as new layer?
I have a two layer image:
layer 1. background
layer 2. A transparent vector layer with text
I have a second image, the same exact size and resolution as the first two layer image. I would like to paste layer 2 from the first image, into the same exact position on image 2. Every time I paste. it centers the text, whether it is just a ctrl-v, or a paste layer. I've even tried promoting the layer 2 in the first image then pasting as new layer into image two, with no luck. Everything I've done pastes layer 2 from image one, into the center of image 2.
I have PSP Photo X2
Why is it necessary to have an image open before using the "Paste as New Image" function.
I want to be able to copy an image from another program and paste in into PSP for editing. I can only do this if I first open a new or existing image in PSP before doing "Paste as a New Image".
I'm new to Paint shop. Is it possible to clip an adjustment layer or image to just the layer below it like in Photoshop? Or maybe Paint shop calls it something else?
View 14 Replies View RelatedI created a image (with blank background) with dimensions 640 x 480 (its my default working image).
I have copied photograph with dimensions 7300 x 4200 and pasted as new layer on the image (640 x 480). Obviously, the pasted photograph is bigger and it couldn't be showed totally. I am adjusting the size of the photograph manually, dragging and dropping its corner lots of time.
I tried to use "image => resize" / "image => canvas size". But it just act on my default image (640 x 480), not the photograph (even when its layer is selected).
So, is there any way of resize the photograph automatically to fit in the default image (640 x 480)?
Problems with the resize facility? The program does not allow resizing on some photographs but it does on others, even those taken on similar settings (same ISO) within minutes of each other. Pressing the resize option or the new button on some photos brings up the resize widow at top left of the screen with no data and only the word 'Static' where the original data should be shown and nothing in any of the other various boxes. Inputting data in any of the boxes does not work and the OK button does not work either. On other photos the usual resize window comes up in the middle of the screen with original photo data shown and all the usual options displayed for the required resize.
The same photographs which will not resize in X5 resize normally in my X3 version and I get the message "Requested parameter not found in the repository" when attempting to resize the photos on my laptop copy of X5.
I recently upgraded from X3 to X4 and just noticed a Cropping and Re-sizing issue with X4. When I crop or re-size an image and then save it as a JPG, the size of the image prior to saving and the size displayed after saving and reopening are different. When I open the PRINT LAYOUT screen for the JPG, it confirms that the image was NOT re sized or cropped. It almost appears like there is an issue with the way X4 saves a JPG. When I perform the exact same cropping or re-sizing but save the image as a TIF, the problem does not happen. I also duplicated the cropping and re-sizing under X3, saved the image as a JPG and the problem did NOT happen.
By the way, when I worked with tech support, they could not duplicate the problem on their system but when they remotely accessed my computer, they saw the problem. The only difference seems to be that I have a PC with a 3.33 gigahertz Intel Core i7 X 980 processor.
I want to create a collage. I set a feather value, make a selection out of a 2nd image and paste it into another file. Pastes in fine, but when I try and grab the corner of the pasted layer and resize it to be smaller, for some reason (I have done this approach on 20 other occasions), it doesn't resize as a rectangle as it should. It starts to resize as an octagon type shape. The following link shows an example of a freshly pasted layer that I tried to resize. There must be some setting that got changed because I have done this across four different versions of paint shop
Example below that shows the big layer getting "bent out of shape". URL....
I have resized my images to an 8 x 10 format, but when I sent the files to my print lab, they told me they are less than an 8x10, with a resolution less than what I had indicated in prox3.
View 2 Replies View RelatedI frequently use a script to resize .jpgs from 3600x3600 to 1000x1000 dpi to save space on my hard drive. After resizing 300+ .jpgs last night, I found that they all retained their original file size. An image that started out as 3600x3600 dpi with a file size such as 3.5mb that was resized to 1000x1000 dpi using the script in X4 still had a file size of 3.5mb when it should have been considerably smaller than 1mb. I relaunched the application and rebooted my computer but no change. To fix the problem I had to run the .jpgs thru the batch process again using the same script but in X3.
The script I was using was created in X3 so I tried creating an identical script in X4. Regardless of which script I used in the X4 batch process, the same thing happened.
This problem seems to be unique to the script and/or batch process. I can open a .jpg file in X4, resize it from 3600x3600 to 1000x1000 dpi, save the changes, and the file size changes accordingly.
I decided to go ahead with the upgrade at $29 and then immediately installed the SP1. Well now I have an issue that I didn't have before. When I use the scroll wheel to zoom in and out the window does not resize anymore along with the image itself (not using tabbed mode), there are settings in preference just for this type of action so the window should resize with the image while zooming if the settings are checked properly. I did a reset and reinstall without any results. Of course the reinstall includes the updated version now so I can't be sure if the SP1 is the cause or not.
The only thing different since my free trial period is I updated Windows 8 - 8.1 and installed the SP1. Any issue with or without W8.1 or after installing SP1?
I have just upgraded to PSPX4 from X2, but have been using PSP since it was a JASC product. So far I am not very impressed with the new version. My first stumbling block was when I couldn't increase the canvas size on a photo that I'm restoring (9120w x 13298h). A chat session with Corel identified the issue as being a 10000 pixel limitation now being imposed. Although I can work with images >10000, I can't increase any dimension past this figure. Who had that brainwave? I had to put my image into PSPX2, increase the canvase size and then load it back into PSPX4 to continue.
Now today, another issue pops up. I can't seem to find other hits on pasting selections within the forum though, so I am raising this.
I loaded two tif images into my Edit workspace. One image is fairly small and I copied this, switched to the larger image and tried a 'paste as new selection'. This worked OK. The I switched to a paintbrush and made a small change to the main image. I then tried pasting the copied image again with 'paste as new selection'. This time the program locked up with Windows trying to find a resolution. PSPX4 then crashed. I have tried various scenario's to narrow the cause down. So far it seems that I can paste a new selection as many times as I want, but as soon as I use a paintbrush to effect even a small change PSPX4 locks up. It either then crashes, as explained earlier, or I get the round no operation mouse cursor displayed. At this point the main control box buttons (close, minimize etc.) won't respond, neither can I switch to the Manage or Adjust areas. The menu trees respond, but selecting File/Exit doesn't work. I have to use Task Manager to close the program.
I had installed SP1, but trying to identify the cause of this issue I uninstalled X4 and reinstalled the base version from CD (332). All settings were left to default. This is how I am running now, so it looks as if SP1 makes no difference. I have also tried using jpg instead of tif, but this also makes no difference. At the moment I'm thinking of ditching X4 and going back to X2.
I am running Windows 7 Ultimate 64 bit with 8Gb RAM.
I copied a file from my Card Program and then pasted it into X4. Besides the quality being shocking the end section of the image was pasted at the beginning, which I saw mentioned in another post.
But the same clipboard image pasted perfectly in PSPX and PSPX3, so the problem is not with the image nor with the Card Program.
Below is the image shown pasted in X, X3 and X4.
Has this been addressed and/or reported or is there a fix. This is extremely poor standards and obviously is from incorrect programming in X4. Not impressed.
Plainly clear one cannot have only X4 installed to work with as it still has many bugs that have not been rectified.
I've been having a recurring problem with Paint Shop Pro X3. When I try to paste a selection into an existing image, it cuts off the bottom 5-10 pixels. I hover over the existing image with my selection, and the entire selection shows up -- I move it into place, and once I paste it on, it cuts it off -- here is a screen shot -- left side shows full image when still 'selected' -- once I right click it cuts off a part of the bottom portion.
This is a piece of another image being pasted into a blank, new image. They are sized the same height (though that doesn't matter) and after paste, chop chop.
I was wondering if there is a way to always paste to a new layer?
View 2 Replies View RelatedI have a few images to merge together and having trouble.
I have a nice background and an image of a person with no background.
I create a new layer on top of my background and then import my image of the person. I can move it arround the layer but how do I make it smaller?
I'm trying to write a script to batch process a number of files. I want the script to open file a*.png, convert black color to alpha and paste image b*.png on top of a*.png (both are the same size). The script converts black to alpha, but it doesn't paste image.
(define (batch-alpha-paste pattern pattern2);get the file lists (let* ((filelist (cadr (file-glob pattern 1)))(filelist2 (cadr (file-glob pattern2 1)))) (while (not (null? filelist))(let* ((file-name (car filelist))(filename2 (car filelist2)) (image2 (car (gimp-file-load RUN-NONINTERACTIVE filename2 filename2))) (draw2 (car (gimp-image-get-active-layer image 2)))(image (car (gimp-file-load RUN-NONINTERACTIVE filename filename)))(drawable (car (gimp-image-get-active-layer image)))) ; convert black to alpha(plug-in-colortoalpha RUN-NONINTERACTIVE image drawable '(0 0 0))
[code]....
I call the script from shell:gimp -i -b '(batch-alpha-paste "aa*.png" "bb*.png")' -b '(gimp-quit 0)'
how to copy image 2 into image ?
I want a plugin for Paint.NET and i will show what i want to say in some pictures.For this exemple i will have :
A. a transparent image (800x600)
B. a red ball image (32x32)
1. I have the A image.
2. I copyed and pasted the ball image B on the A image.
3. Now what plugin i want to make is to expand the ball B selection on the all A screen/canvas.
4. Now the ball image B will be expanded on the all screen of A.
I know this is basic I slect one layer for the image . When I use the rectangular selection tool on the layer and go to resize or move the selection with the move resize pixel tool instead of moving or resizing the selected area I get blank rectangle that moves or resizes. The selected area just stays the same.
View 2 Replies View RelatedWhether just dealing w/ a png file (resizing) like attached, or converting to smaller sized icon, for the most part it eliminates the white circle, when reduce to somewhere around 32 x 32 px.
Maybe this is because the reduction makes the given element too small to reproduce?
But, in the reduced versions, there are PARTS of the white line that are clearly visible - but not a solid white line. So if it shows part of the line, as an intermittently dashed line, why can't it show the entire line?
The image was created / saved at 32 bits. It's not only a problem dealing w/ icons - it's reducing png files as well.
I'm thinking it may be better to start off w/ an image close to the finished size. But w/ icons in one icon file ranging from 16 to 64 & even 256 px, that's hard to do.
I'm a relative noob to GIMP. Long time Paint Shop Pro user who has gone over to a Mac Book. I'm very frustrated by my inability to paste more than one layer at a time. Meaning, that I paste a layer from the clipboard into an image I am building, but I cant copy a new image to paste in without shutting down the program & reopening....Otherwise the same image keeps trying to repaste.
View 7 Replies View RelatedIm just trying to select a portion of an image and the paste it to another layer.
1. Select a portion and copy.
2. Create new layer.
3. Select the new layer.
4. Paste.
The only thing i get is a kind of new layer that says: "Floating selection"
I've just started using PS Elements 10 again after not having used it for some time, and I've forgotten a few things. When I paste an image which I've selected from another image (image A) into a layer mask for image B, the image A selection appears in black and white. Also, is there a quick way to return PS Elements 10 to its default settings?
View 5 Replies View RelatedI have an image, all black of a ballerina on one layer, with black text on another. I am trying to put a bouquet of red roses at her feet, but it turns shades of grey when I attempt to do that.
View 2 Replies View Relatedwhen I select, copy and paste the image it still has the content that I removed using the layer mask.
I want to paste it over another psd whilst maintaing the transparency.
PSD is at [URL]
How to use X4 layer style? It seems so slow, What is your use case mostly? I can have it with vector object/text, ok, but sometimes, it is slow with raster layer.
View 3 Replies View RelatedIt's a problem occurring frequently If the contents of a specific layer is comprised of thin, short or small objects, brush strokes etc. and I need to move them.
When I try to select them (in order to move them), many times the mouse goes a little to the side of the objects (because they're so thin/small) and clicks on the object(s) on the layer beneath. This also has the unwanted side-effect of automatically deselecting the current layer.
Isn't it possible, once a layer is selected, to click and drag anywhere on the canvas to move its contents without deselecting it, like in Photoshop?
I've been marking-up images with vector text (on vector layer) and have some issues. After clicking to position the text box, typing in text and then clicking the CHECK tool button to 'set', how does one go about deselecting that text object? It's not working smoothly here!!
View 1 Replies View RelatedI'm a new user of Paint Shop Pro X4 and have come across from Photoshop Elements 9.
One feature I can't seem to find, if it exists at all, even though it really should, is the ability to move a layer while constraining it horizontally or vertically.
In PSE/PS you can hold down the Shift key when dragging layers to keep it on the X or Y axis allowing the layer to be positioned without it drifting in the wrong direction.
Can PSP X4 do this, and if so, how?
I've come across an issue using X6 I haven't seen before. After working on a multi-layer pspimage file, saving it and reloading I can no longer edit one of the raster layers. When the layer is selected with the pick tool it shows the circle with line when mousing over. It was not merged or locked so not sure what's causing this and never came across this with any of the previous PSP versions I've used.
PSP X6 16.1.0.48
UPDATE: Tried making sure it was the top layer and still could not edit the layer. I then made all the other layers invisible and at that point it would allow editing the image. Is there some hidden feature in X6 I'm missing or is this a quirk?