AutoCAD Inventor :: Batch Export To DWG Solids And Drawings
Nov 8, 2011
I have a client who is requesting that I send them ".dwg" files of a particular project. They are asking for both 3D solids AND 2D drawing files.
1.) I can export the assembly files to a 3D DWG easy enough but how do I do it for 83 files using task scheduler or something; I cannot figure it out?
2.) We have used ".dwg" as our native drawing format because we have people here who have a need to open our IV drawings using AutoCAD. Can I just send my client these files, without the supporting part files, and have them open them?
3.) If I just send them a copy of our native ".dwg" files are they going to be able to re-use that geometry somehow? There isn't a real IP concern as these are just pipe supports and platforms made from available steel shapes but I certainly wouldn't want them to be able to take our work and re-use it on a different project without us. If they have to do some crazy stuff like explode and scale and re-dimension these things in order for them to be re-usable on a different project, I would at least prefer that to them just being able to reuse them easily. I guess what I'm saying is that if they are going to re-use this content, I am not going to make it easy for them that's for sure!
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
View 3 Replies
ADVERTISEMENT
Nov 23, 2012
I have an assembly with some hidden solids in which are turned to invisible in both part and assembly but they show on the drawing.
how to not show these in the drawing but still show the unhidden soild.
View 2 Replies
View Related
Apr 28, 2011
A coworker is trying to publish a bunch of drawings to dwf and is having problems with the linetypes. Essentially, after publishing, the hidden lines are showing up dashed in some drawings and solid in others. We've tried setting the ltscale to 1 and the psltscale to 0. We are using AutoCAD 2007. Additionally, when we look at one tab in paperspace, the lines look correct, on another, the dashes look smaller. I'm at a loss as to what to do.
View 3 Replies
View Related
Aug 9, 2011
I have been trying to export inventor drawings to dwg files so they can be opened in AutoCAD and be edited. However when they are opened in AutoCAD, the views cannot be exploded for our needs.
View 9 Replies
View Related
Aug 20, 2013
Due to customer constraints I have to embed .tif images into AutoCAD drawings. This is a manual operation doing a copy ->pastespecial. I was wondering if there was any way to automate this? The pastespecial command doesn't seem to take arguments to bypass the dialoge box and therefore does not allow me to batch embed .tifs programatically.
View 5 Replies
View Related
Feb 24, 2014
On some of our systems (most) when exporting a 3D view to DWG with ACIS Solids makes Revit 2014 terminate whitout any dialogue or information en event log what so ever. When changing solid type to polymesh the export works fine. The file is created in the crashing scenario but is only a few kilobytes in size, as opposed to to above 33 MB file another workstation creates.
All systems use windows 8.1 64-bit, have 32GB RAM (actually the one were the export works only has 24GB). Revit 2014 Build 20131024_2115(x64).
I have uninstalled Revit 2014 and reinstalled whitout success on one of the stations where the bug occurs.
View 1 Replies
View Related
Jun 20, 2001
Is there any way of running a batch process to convert a number of AutoCad drawings into Tiff format, at once? Also, if a batch process is not available, can we save our plot settings for conversion to Tiff so that they can be recalled at a later stage? We would like to be able to transfer the same plot settings to other PCs so that we are all producing the same formatted files. Are the plot settings transferable?
View 5 Replies
View Related
Nov 11, 2013
I have to applicate to 3000 drawings the same page setup. How can I do that rapidly? I have one master drawing with the good page setup.
View 9 Replies
View Related
Mar 26, 2012
Why I get a process error batch converting these drawings? The command line says could not bind xrefs but I clearly checked the option not to bind.
View 2 Replies
View Related
Jun 20, 2012
I'd like to batch plot 50 drawings, all of which have the same title block in the same position. This is easy with the PUBLISH command, but I'd like to be able to add a "stamp" of the customer logo to these drawings, which I have as a block in a separate file. Basically I want to easily be able to plot the same drawings for different customers, the only difference being the customer logo. Is this possible?
View 1 Replies
View Related
Jun 17, 2011
We have Adobe Acrobat Pro which has a plugin to allow batch plotting of PDFs from multi-sheet drawings. Works awesome in Autocad 2009 and before. It DOES NOT work with Autocad 2011!
We have drawings with 70 sheets and it's nice to print the entire document to a single PDF in one step. Takes less than one minute in Acad09. Nice!
View 5 Replies
View Related
Oct 8, 2013
I have 200+ page drawings and need to open each dwg to erase same block and text strings. Any way to batch erase same blocks and strings in multi-pages?
View 7 Replies
View Related
Jul 17, 2012
I am having a bit a troubles with importing 3D solids to Inventor.
When I make 3D solids myself with autocad 2012 it works fine, but these solids I got appear scrambled.
View 4 Replies
View Related
Aug 31, 2012
I was wondering if it is possible to have 2 solids in 1 part and being able to pick which one I want to see in an assembly and which one I want to see in a drawing?
I have a leafspring that should show up unbended in the drawing (for the supplier) and bended in the assembly (for visual correctness). (I used Reference Sets for this in Unigraphics.)
I'm using Inventor 2012 (64-bit) with SP1 installed.
View 9 Replies
View Related
Apr 12, 2013
I have a multibodied part (roughly 700 parts) and I need to do a cut extrusion. The problem is that when I'm cutting through a hundred or more solids I might miss one if it's close to the edge. I though, no problem I'll just go back to the extrusion command and add those solids I missed. Problem, the program only lets me select one solid and undoes all I had previously.
2013 FDS
View 2 Replies
View Related
Apr 2, 2012
I have several IGES files that I need to make into solid models. I have been searching for days on how to do it in Inventor 2012 and everyone says how easy it is, but yet I have no luck. This file was created from a scanned mold and then made using a point cloud.
View 1 Replies
View Related
Jan 15, 2013
Is there any way in inventor to use one extrude cut feature on two different solids at the same time?
View 9 Replies
View Related
Feb 26, 2012
Any solid shape just tend to go to the right no matter what angle you look at it and as it seems to go towards towards infinity . This is in orthographic view I might add. In perspective view the cube ends within the screen but it far from cubical and changes its appearance as you rotate it. As you can see in the pictures even the axis graphics down to the left is messed up.
Picture one is while I am extruding the 10mm cube. The big orange thing is the arrow used to drag up from the sketch.
Picture two is just the 10mm cube. As you can see the wire frame works just fine and it event hides the edges behind the solid.
I just installed the software on this computer so I suspect it is my graphics card that simply cannot handle the 3D solids. It is a few years old, a NVIDIA Quadro FX 540. The shadows does not work either, probably because I do not have shader model 2.0 or newer. do I have to scrap my computer?
View 1 Replies
View Related
Nov 23, 2012
I have an assembly with some hidden solids of a part in, which are turned to invisible in the part but they show on the drawing. How to not show these in the drawing but still show the unhidden solid of the part.
View 2 Replies
View Related
Apr 11, 2013
I need to do a cut extrusion on a multibodied part and need to select the solids. As of right now I have to select each one individually rather than doing a drag box or something like that. how I can do this fast, I've got a multibody part w/ over 1000 solids (I didn't create it, yes I know this is probably excessive).
View 9 Replies
View Related
Mar 11, 2013
I can't seem to get the "Solids" selection to become active in the assembly extrude dialog.Is there actually a way to control participants prior to creating the extrude feature?
View 6 Replies
View Related
Mar 18, 2013
we have to solids put in one assembly. those two solids are intersecting. how can I trim first solid with shape of second one?
View 3 Replies
View Related
Jun 26, 2012
How can I export 3D solids from Inventor to AutoCAD as well as reducing their byte size, for example changing assembly solids to a skin.
I do not need the internal components or intelligence of the assembly but I do need the solid body for presentation purposes. Ultimately I will be traveling with these solid drawings on my laptop and need them to be extremely compact.
View 3 Replies
View Related
Jan 22, 2013
I am a tech illustrator taking our engineering models and creating dumb solids for architects to drop into CAD drawings. When I take an assembly and try to shrinkwrap it (with the Solid Bodies option) the file still has all the internal ribs and fillets and stand-outs. I have created extrudes to fill gaps and holes and even tried to create single pieces to assemble later to no avail.
View 3 Replies
View Related
Apr 7, 2013
I'm trying to figure a "fast" algorithm to obtain the amount of material (in linear distance) between 2 points within an assembly i.e. if I draw a line between any two points P1 & P2 in an assembly, what is the length of this segment that goes through material and what is the length that goes trough empty space?
For now I'm creating a thin cylinder as a new part, place it with one end at P1 and the other end at P2, calculate the interference volume of this body with the rest of the assembly and divide this number by the total volume of the cylinder. but has some problems:
1. It is VERY slow, and I want to call this function lots of times.
3. Is not accurate due to the finite diameter of the cylinder.
2. If the assembly has some interferences, the result is wrong (accounting same volume more than once)
View 2 Replies
View Related
Apr 22, 2013
When I try to select several solids for an extrusion cut/interference I can do so fairly quickly by selecting all of them in the browser so long as the extrusion is set to "all" or "distance".
For some reason when I need to do a "to" or "between" I have to select them one at a time. Every time I select a solid the select solids options returns to the input so that I have to select one solid then press the "Solids" button and select another one. This tends to do the same thing if I create an extrusion and then want to later modify the solids taking part in the extrusion. Is there an option I can turn off?
View 1 Replies
View Related
Jun 11, 2012
I have a part which has 2 solid bodies in it which were created using the extrude command. When setting the iProperties for this part I get the material properties applied to both solids. Is it possible to set a material for each solid so that they will be listed separately under iProps ? I suspect this can't be done in which case how would I go about separating the solid bodies ?
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 3 Replies
View Related
Jan 24, 2013
derive multiple solids from a part. I use the code shown below but it seem as I only can get the first solid in the part that I am trying to derive from.
''More Code'''
' Create a new part document, invisibly.
oPartDoc = m_inventorApp.Documents.Add(DocumentTypeEnum.kPartDocumentObject, , True)
oPartDoc.UnitsOfMeasure.LengthUnits =UnitsTypeEnum.kMillimeterLengthUnits
' Derive the assembly into the part.
Dim oDerivedPrtDef AsDerivedPartDefinition
oDerivedPrtDef = oPartDoc.ComponentDefinition.ReferenceComponents.DerivedPartComponents.CreateDefinition(oTopDoc.FullDocumentName)
Call oPartDoc.ComponentDefinition.ReferenceComponents.DerivedPartComponents.Add(oDerivedPrtDef)
'''More Code'''
How can I get all the solids from the part that I am deriving from?
View 3 Replies
View Related
Dec 4, 2013
I am new to AutoCAD and have to export many drawings to PDF format to send them out to clients. I was wondering if their was a Macro or some other way to export drawings into pdf form without having to open each file and pressing export to pdf button?
View 9 Replies
View Related
Jan 26, 2013
I have 17 years of Unigraphics / NX and 2 months of AutoCAD 2013 3D experience . I am designing a welded table that has lots of tubes to be aligned to each other. It appears that snaps do not work on solids and there is no way to do a point to point solid move in Inventor. Is there any way to select a solid, snap to a base point, then move or copy to a snap destination point of another solid? Does this need to be done in an assembly drawing? If so, do I have to create a file for each tube and then bring each of them into an assembly? I would like to draw the table as one part. Designing all the parts together. The lack of snaps is strange to me. I can only snap to end points in sketches. No midpoints?? I must be missing something very basic and easy. I have not tried an assembly drawing yet.
I have been working through hours and hours of training videos. Everything but move, copy and paste has been pretty easy. I think I need to find an AutoCAD to Inventor transition video. There are no training courses in my area. So I'm stuck with online training. This problem is never addressed and I can't ask the question on a video.
View 7 Replies
View Related
Feb 28, 2013
Is there a way to sculpt a part composed of multiple solid bodies without having to perform the sculpt command for each solid body? I want to use the same work plane to remove material from a part but the sculpt command only allows me to select one body at a time. This means after the first sculpt of one solid, I need to turn on the visibility of the consumed work plane and perform a sculpt on each of the remaining solids.
Not a huge issue, but in the future I may need to do a large number of these tasks. I attached a sample file. I threw it together in 30 seconds so it's not the prettiest looking thing.
View 4 Replies
View Related
