AutoCAD Inventor :: How To Add Solids To Cut Extrusion
Apr 12, 2013
I have a multibodied part (roughly 700 parts) and I need to do a cut extrusion. The problem is that when I'm cutting through a hundred or more solids I might miss one if it's close to the edge. I though, no problem I'll just go back to the extrusion command and add those solids I missed. Problem, the program only lets me select one solid and undoes all I had previously.
2013 FDS
View 2 Replies
ADVERTISEMENT
Apr 11, 2013
I need to do a cut extrusion on a multibodied part and need to select the solids. As of right now I have to select each one individually rather than doing a drag box or something like that. how I can do this fast, I've got a multibody part w/ over 1000 solids (I didn't create it, yes I know this is probably excessive).
View 9 Replies
View Related
Apr 22, 2013
When I try to select several solids for an extrusion cut/interference I can do so fairly quickly by selecting all of them in the browser so long as the extrusion is set to "all" or "distance".
For some reason when I need to do a "to" or "between" I have to select them one at a time. Every time I select a solid the select solids options returns to the input so that I have to select one solid then press the "Solids" button and select another one. This tends to do the same thing if I create an extrusion and then want to later modify the solids taking part in the extrusion. Is there an option I can turn off?
View 1 Replies
View Related
May 13, 2013
I'm trying to understand extrusion to 3D solids better. This started when I drew a joined, closed 3dpolyline and found it wouldn't extrude (the shape titled 3D POLYLINES 4 sides joined, in the attached DWG), even though everything lies in the same plane (z=0). It gives the error "segment chord not perpendicular to normal". A chord is part of a circle, and there are no circles in the .dwg, so I don't understand the error. If you join only 2 or 0 sides, then at least 2D extrusion to a surface is allowed, but not if all 4 sides are joined, i.e. one 3D polyline.
If I draw regular polylines overtop the 3D polylines, then join and close them, it extrudes into a solid. This suggests that 3D polylines can't be extruded into a solid when regular polylines can, yet if I draw some scratch 3D polyline geometry that is joined and closed, these 3D polylines will join. It's as if I've found some secret shape that AutoCAD refuses to allow extrusion on.
View 8 Replies
View Related
Jul 17, 2012
I am having a bit a troubles with importing 3D solids to Inventor.
When I make 3D solids myself with autocad 2012 it works fine, but these solids I got appear scrambled.
View 4 Replies
View Related
Aug 31, 2012
I was wondering if it is possible to have 2 solids in 1 part and being able to pick which one I want to see in an assembly and which one I want to see in a drawing?
I have a leafspring that should show up unbended in the drawing (for the supplier) and bended in the assembly (for visual correctness). (I used Reference Sets for this in Unigraphics.)
I'm using Inventor 2012 (64-bit) with SP1 installed.
View 9 Replies
View Related
Oct 4, 2013
What's wrong with extrusion 15?
I deleted many features since the file was large, and many features got warnings, but extrusion 15 was the only one with warning in the original file.
View 6 Replies
View Related
Aug 16, 2012
I wanted to add an extrusion to an asembly. I was able to highlight the required geometry and create the feature, but is not showing up. In the browser, there's a red "up arrow" beside it. Why is it not showing?
View 3 Replies
View Related
Aug 9, 2012
I have closed profile "Sketch1" placed on one of the parts in Assembly.
Suggest iLogic code to create cut Extruson (Extents=All) based on the "Sketch1"
View 6 Replies
View Related
Oct 27, 2012
First off if I update a sketch block in a derived part, how do I get the sketch blocks to update? Do I have to delete derived item, and rederive it?
Also if I modify a sketch block that is used for a extrusion, how do I get the extrusion to update? Do I have to delete extrusion and rextrude?
View 7 Replies
View Related
Apr 2, 2012
I have several IGES files that I need to make into solid models. I have been searching for days on how to do it in Inventor 2012 and everyone says how easy it is, but yet I have no luck. This file was created from a scanned mold and then made using a point cloud.
View 1 Replies
View Related
Jan 15, 2013
Is there any way in inventor to use one extrude cut feature on two different solids at the same time?
View 9 Replies
View Related
Feb 26, 2012
Any solid shape just tend to go to the right no matter what angle you look at it and as it seems to go towards towards infinity . This is in orthographic view I might add. In perspective view the cube ends within the screen but it far from cubical and changes its appearance as you rotate it. As you can see in the pictures even the axis graphics down to the left is messed up.
Picture one is while I am extruding the 10mm cube. The big orange thing is the arrow used to drag up from the sketch.
Picture two is just the 10mm cube. As you can see the wire frame works just fine and it event hides the edges behind the solid.
I just installed the software on this computer so I suspect it is my graphics card that simply cannot handle the 3D solids. It is a few years old, a NVIDIA Quadro FX 540. The shadows does not work either, probably because I do not have shader model 2.0 or newer. do I have to scrap my computer?
View 1 Replies
View Related
Nov 23, 2012
I have an assembly with some hidden solids of a part in, which are turned to invisible in the part but they show on the drawing. How to not show these in the drawing but still show the unhidden solid of the part.
View 2 Replies
View Related
Aug 20, 2012
I'm trying to move a rectangular extrusion towards me on an object, however it will only go farther away from me, and to the right and left.
View 9 Replies
View Related
May 17, 2013
I cut a curved profile using extrusion and mirrored it about the original plane. But It doesn't cut thoroughly ? there is still a surface of the rarer side of the part ?
the original extrude cut was "Through All".When do the same cut gving a distance...it mirrors perfectly..
View 2 Replies
View Related
May 17, 2012
I am working on detailing an assembly that requires two parts to be bolted together and then have a hole bored through both parts. I want to show the assembly without the bore and then with the bore. I do not want to have to create a derived part. There should be a way of toggling this extrusion in the assembly view, but I have not yet found it.
View 4 Replies
View Related
Jul 20, 2013
In sketches i can see the names of the dimensions, the parameters, but if i have a few extrusions, can i know which parameter governs the height of the extrusion only according to their content?
View 1 Replies
View Related
Jun 9, 2012
All of a sudden, my line tool in sketch mode does not connect segment to segment and each individual line can be dragged wherever. This also means I cannot extrude any shapes I make because inventor does not realize the series of line segments create a closed shape. This happens across all part files, old and new.
View 3 Replies
View Related
May 22, 2013
How can i have extrusion 3 with the Glass appearance or clear so as to look like Glass ?
View 2 Replies
View Related
Jun 25, 2013
We've got a lot of pipe added from CC then manually edited the extrusion length (D2) while modeling (not using tube and pipe). Now I want to get pipe lengths from the BOM. Currently the BOM gives the PL parameter as length, which is incorrect.
I know I can rename D2 and mark it as an exported parameter and add that to the BOM.
I think I could also make PL equal to D2 which would also solve the problem.
Both of these solutions would require opening and editing hundreds of parts, taking a LONG time.
View 9 Replies
View Related
Jan 9, 2013
We design long overland conveyors that can be kilometers long. In two separate instances, I have extruded a profile along a path that is a few hundred meters long with no problem. However, when the path gets to around 700 meters, the extrusion that worked fine at 600 meters simply falls apart. Does Inventor seriously have a limitation to length of an extrusion?
View 9 Replies
View Related
Nov 8, 2011
I have a client who is requesting that I send them ".dwg" files of a particular project. They are asking for both 3D solids AND 2D drawing files.
1.) I can export the assembly files to a 3D DWG easy enough but how do I do it for 83 files using task scheduler or something; I cannot figure it out?
2.) We have used ".dwg" as our native drawing format because we have people here who have a need to open our IV drawings using AutoCAD. Can I just send my client these files, without the supporting part files, and have them open them?
3.) If I just send them a copy of our native ".dwg" files are they going to be able to re-use that geometry somehow? There isn't a real IP concern as these are just pipe supports and platforms made from available steel shapes but I certainly wouldn't want them to be able to take our work and re-use it on a different project without us. If they have to do some crazy stuff like explode and scale and re-dimension these things in order for them to be re-usable on a different project, I would at least prefer that to them just being able to reuse them easily. I guess what I'm saying is that if they are going to re-use this content, I am not going to make it easy for them that's for sure!
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
View 3 Replies
View Related
Mar 11, 2013
I can't seem to get the "Solids" selection to become active in the assembly extrude dialog.Is there actually a way to control participants prior to creating the extrude feature?
View 6 Replies
View Related
Mar 18, 2013
we have to solids put in one assembly. those two solids are intersecting. how can I trim first solid with shape of second one?
View 3 Replies
View Related
Jun 26, 2012
How can I export 3D solids from Inventor to AutoCAD as well as reducing their byte size, for example changing assembly solids to a skin.
I do not need the internal components or intelligence of the assembly but I do need the solid body for presentation purposes. Ultimately I will be traveling with these solid drawings on my laptop and need them to be extremely compact.
View 3 Replies
View Related
Jan 22, 2013
I am a tech illustrator taking our engineering models and creating dumb solids for architects to drop into CAD drawings. When I take an assembly and try to shrinkwrap it (with the Solid Bodies option) the file still has all the internal ribs and fillets and stand-outs. I have created extrudes to fill gaps and holes and even tried to create single pieces to assemble later to no avail.
View 3 Replies
View Related
Apr 7, 2013
I'm trying to figure a "fast" algorithm to obtain the amount of material (in linear distance) between 2 points within an assembly i.e. if I draw a line between any two points P1 & P2 in an assembly, what is the length of this segment that goes through material and what is the length that goes trough empty space?
For now I'm creating a thin cylinder as a new part, place it with one end at P1 and the other end at P2, calculate the interference volume of this body with the rest of the assembly and divide this number by the total volume of the cylinder. but has some problems:
1. It is VERY slow, and I want to call this function lots of times.
3. Is not accurate due to the finite diameter of the cylinder.
2. If the assembly has some interferences, the result is wrong (accounting same volume more than once)
View 2 Replies
View Related
Jun 11, 2012
I have a part which has 2 solid bodies in it which were created using the extrude command. When setting the iProperties for this part I get the material properties applied to both solids. Is it possible to set a material for each solid so that they will be listed separately under iProps ? I suspect this can't be done in which case how would I go about separating the solid bodies ?
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 3 Replies
View Related
Jan 24, 2013
derive multiple solids from a part. I use the code shown below but it seem as I only can get the first solid in the part that I am trying to derive from.
''More Code'''
' Create a new part document, invisibly.
oPartDoc = m_inventorApp.Documents.Add(DocumentTypeEnum.kPartDocumentObject, , True)
oPartDoc.UnitsOfMeasure.LengthUnits =UnitsTypeEnum.kMillimeterLengthUnits
' Derive the assembly into the part.
Dim oDerivedPrtDef AsDerivedPartDefinition
oDerivedPrtDef = oPartDoc.ComponentDefinition.ReferenceComponents.DerivedPartComponents.CreateDefinition(oTopDoc.FullDocumentName)
Call oPartDoc.ComponentDefinition.ReferenceComponents.DerivedPartComponents.Add(oDerivedPrtDef)
'''More Code'''
How can I get all the solids from the part that I am deriving from?
View 3 Replies
View Related
Sep 16, 2011
I design press tools. Is there any ways in inventor 2012, where I can have only one common sketch in zero height and extrude profiles in different heights. Like plate no 1 @100 to 120mm (in vertical axis. A 20mm thick plate placed at 100mm above zero plane.) and plate no 2 in 150 to 175mm height and so on.
View 6 Replies
View Related