I need to have two people working in the same dwg, basically at the same time. We call it an Assembly Plan. Everything is done in model space. I want to be able to have each of them basically work in the same dwg and at the end of the day, BOTH of their work is saved in one dwg, but no double lines, etc.
View 2 Replies
I have 10 separate drawing files that I want to combine into one drawing and I want each drawing to be on a separate layout.I want to end up with one drawing with 10 layout tabs each containing the graphics from one drawing.Each drawing has one layout with the graphics on it.No fancy paper space / model space stuff.No viewport scaling.
I thought this could be done via Design Center but I've never used that.
It seems that the 'combine zoom and pan commands' option doesn't work correctly. Let's say it doesn't react as i am used to in previous version. now i have to do the undo command or 'ctrl z' many times before i am back at the point where i want to go. I using the middle mouse button often to zoom in and out, and for panning. but now there are a lot of steps to undo if you want to go back.
I tried to switch of and on this option in the options dialog but no difference.
Have installed 3 Autodesk Exchange add-ins and they each create their own ribbon tab named "Add-Ins". Is there an easy way to combine them into the same ribbon tab?
[URL]
Can the Plot command be used to combine multiple drawing views into a single DWF file?
View 1 Replies View RelatedI'm using Cad 2011,how do u generate 2D drawings from a 3D object,i know that the command only works on layout n on 2013 the command is "Base".So wat is it on 2011?
View 4 Replies View RelatedI am using 2D-AutoCAD, and trying to plot a drawing on a printer, the drawing is different colors and I want to print it black on white paper, I am unable to select the proper .ctb file from the Plot Style Table pulldown, it does not show up? I have plotted other drawing sets using this method but for some reason cant do it on this particular set.
View 3 Replies View RelatedWhat is the best way to get 2D drawings from a 3D model? Flatshot will give a flat view but it does everything in the entire drawing and brings every line with it.
Is there an easy way to get a 2d drawing from one thing in a 3D model? We only have Autocad, no extras like Revit.
Where the majority of people annotate their drawings. A major improvement I recommended to the plans was to place our annotations in our XREF drawings instead of placing them in model space of our sheet sets. (Our sheet sets are our drawings that have our titlblocks that we plot from ). So, I am asking where do the majority of CAD users like to add annotations to there drawings? PaperSpace, model space, xref’s, etc. and why they do it that way?
I should also state that we are transitioning from 2012 software to Civil3d 2014 software too.
I have been trying to figure out how to copy a Layout from one DWG to another. I know there are several threads about this, and I have tried the methods they reccomend, but I am having an unusual problem.
I have been trying to open a Layout by using the "from Template" option for creating a new Layout, then opening the DWG containing the desired Layout. It works, but everything drawn in model space ends up compressed into the lower left corner and there is nothing in model space. So, the paper space information from the Layout is being imported, but the drawing info is getting mixed up somehow.
I have tried using the Design Center with identical results.
I have built a 3D turbine that combined more than 50 3D parts. Now I want an assembly drawings to show our clients how to put those parts together. Any autodesk software? Some people recommended Inventor and I have never used it. Is this a right software to do some kinds like this project?
View 5 Replies View RelatedRecently I started using AutoCAD 2012 and I ran into one problem which I didn't encounter before.
The problem is that when I try to paste objects from another drawing (through clipboard - usually another instance of AutoCAD) I can't paste them in some drawings only.
The following things happen:
-Autocad behaves normally like when I usually paste objects except there is nothing inserted.
-When I save the drawing after unsuccessful insert, even if I canceled inserting, drawing size increases dramatically (for about 2-4MB).
-If I open new drawing, I can insert objects there.
-Also when I copy to clipboard, autocad takes a lot of time even if it is only few lines.
I tried these thing to fix issue:
-I checked if there are any layers turned off.
-I tried to copy with COPYBASE
-I restarted autocad (sometimes it works but only for some moments or for one insert).
-I did PURGE and AUDIT
-I tried to copy paste in same instance of AutoCAD but that didn't work.
I'm usually using t least 2 instances of AutoCAD (I hope that is not the problem).
I have an assembly with some hidden solids in which are turned to invisible in both part and assembly but they show on the drawing.
how to not show these in the drawing but still show the unhidden soild.
I am doing electrical drawings with the architect giving me an exported DWG from Vectorworks. I have XREF the background drawing that when opened is about 6 blocks of the building background and 2 blocks of the electrical devices.
Here is the problem: The architect sent me an updated DWG that only has the electrical updates without any backgrounds. My thought was to purge all and then select all the items and then copy with basepoint. Then open the original architects XREF drawing. Select those two electrical block, erase them (or move them to the size a fixed distance). Then paste as block from the other file. Then move the block to the correct location, explode, done.
Big problem: I just tons of this error in the command line referencing different block group numbers being ignored:
Duplicate definition of block Group-1265-1 ignored.
Then the block that was pasted added a background that wasn't in the old drawing and many of the items in that block was either missing or still had the old symbols. Can't figure out how to update the background with confidence that it is really updated with new information and not keeping old.
If I open a new drawing and paste that block in, everything comes in perfectly
We are a small company with two PCs - 1 laptop and a server. We are having problems using xref drawings across the network. The laptop is mapped to the Z drive and the reference file is on the server (D drive). Each time we open a drawing on the laptop (Z drive) the xref files which is saved on the server (D drive) cannot be seen. We reattached the file and it works fine until we closed and reopen the drawing. When the drawing is opened on the laptop the xref is not loaded on the screen. However, the file extension can be seen but no drawing is visible.
In summary how can we tell get the laptop to permanently reference xref files saved on the server without them dropping out?
When I receive my background drawings from an Architect who is basically exporting to DWG from their VectorWorks program I seem to have difficulty using their PaperSpace Sheets. Usually the border is a block so I just save the block as a file and then XREF it back in and then erase the block. From there it is a mess and can't figure out what is going on or how to fix it. First: I can't find any viewport to modify or scale, but if I click in the right spot I get multiple X-Y references as show in attatched file which are always scaled at 1:1 and as the 2nd attached picture shows is a location for three different viewports that I can't access. The attached picture is shown with the XREF backgrounds turned off so you can see the X-Y locations versus when they are on. How to actually make these in to editable viewports or at least erase them and start over?
View 1 Replies View RelatedI'm having problems to transform an architectural drawings done in 2D to 3D, and also when it comes to confirm and locate their respective courts.
View 1 Replies View RelatedWe are using AutoCAD 2011 and AutoCAD 2012 on the same drawings. It is slowing the drawings down in AutoCAD 2011. There is at least one person that only has AutoCAD 2012 on their machine.
View 2 Replies View RelatedIs there any way to close a drawing that is open on another user's computer, from my computer?
We have a problem with engineers opening a drawing, printing and marking up that drawing, then taking the print to a drafter to make changes to the drawing, but failing to close the electronic drawing file.
Normally, we just call the engineer and ask them to close the drawing. If they were away from their desk, we could just walk over and close the drawing ourselves. Now that's not possible. We have a new security protocol which locks the user's computer after ten minutes of non-use. We each create our own password which we're not supposed to share with others. I just want to be able to log into the server and close a drawing that someone else has open.
I have drawings with annotation and when I send to the plotter the processing is very slow, and take some time to plot.
View 1 Replies View RelatedI have been given a new lap top plus the updated AutoCAD rev. 2012.Supposedly it is superior to my old laptop but... it runs slower, the mouse action is awful, it's like stirring cold porridge.
Anyway, I have spent the first week battling with various bits, trying to get it to look & feel like my previous laptop using 2010.
The big issue I have is upon start up. Rather than loading the standard AutoCAD "drawing 1" regardless, I want to have the browser open up so I can select the' previous drawings loaded on my last session or select a new drawing or browse folders to find the drawing I want.
how I managed to switch this on, back when I managed it on 2010 version.I have given up on running up & down the menus.
I noticed today that in some drawing files I cannot see the selection box (clicking in a blank area and moving the cursor). I am still able to select things this way, both crossing and inclusive, but I just can't see where the cursor is or the selection box. In other drawings this works as it should with the blue and green boxes visible.
Under options>Display, the colors are set correctly. Under Drafting the aperture slider is at about halfway, but the preview is blank. Under Selection the pickbox size is at a fifth of the way up, but the preview is blank.
I have tried updated my graphics driver to the newest (and AutoCAD recommended) driver.
I'm working on a drawing that has some plan views that I need to keep.. but I would like to import views from another drawing.
Is there a way to copy views from another drawing? Would be nice if when you insert another drawing as a block, it would bring the views along, same way that it brings along blocks, layers, linetypes.. etc.
[URL]
I receive this pop up message every time I open a drawing. How to stop this from happening??
Not sure what info you may need I'm running windows 7 with autocad 2010. I also have autocad 2005 loaded on the same machine and this box does not appear when opening drawings with it.
I have 20 seperate Acad drawings, which uses multiple blocks across all drawings. Is there a way i can create a block using Wblock and save seveal blocks in a folder. So when i need to make a change to a block, i make the change to the block in the folder and it automatically updates the block in all drawings? Is it possible to set this up without using xrefs, as i have hundreds of blocks.
View 2 Replies View RelatedI sometimes am given drawings which are done in a software package called LSS of which I do not know much, these drawings are usually to show a model of a band, by using contours of a site on which I am working and are saved by LSS in a dxf format so I can then import them into my autocad drawing.
The problem I have is that I also have drawings of the same site from a surveyor which has the buildings new and existing, but they are in different units.
The surveyors drawing for instance the grid measures 100000mm whereas the LSS model drawings the grid is 100m.
This means the coordinates are different so it is difficult to match them up , the only way is I have found is to rescale the LSS drawing up by 1000, then find a common intersection i.e. corner of boundary line. This is not always very accurate.
The guys who do the LSS drawings tell me they cannot change the units to mm.
[URL]........
I have a jpg file that I needed to apply some transparency to and saved it as a png file. I now want to delete the jpg file from the folder but it's being referenced in several drawings, andI don't know which ones. Is there a way to reverse the function of Reference Manager (perhaps with a different app), i.e. find all the drawing files that reference my jpg file?
For some reason, one of our PC's running MEP 2012 has suddenly started to only open drawings in read-only mode. The same drawings will open just fine on other PC's so they / their folders are not set to read-only in windows. The user also has the exact same access rights on the server as the others.
The strangest thing about this is the following warning box that appears on screen. see attached.
For some reason, the alert message which displays the full path of the dwg in question, has it's path modified with a date and time stamp prefixed with a '@' symbol. Needless to say the folder '@GMT-2012.07.17-11.00.04' does not exist. In 18 years of playing with AutoCAD I've never seen this one before.
Rscently upgraded from xp to win 8, re installed autocad 2011.
Now when I try to open a drawing from within autocad my system crashes, I get a flash of horizontal lines then two blank screens.
Tried running narrator but just get static through the speakers, I have to hit the re start button to get back in.
I can open a drawing from explorer if autocad is not allready running, autocad starts and the drawing opens with no problems. but if I try to open another drawing we crash.
So, I am working off a site drawing of an 80,000 sq ft production plant that was drawn by some old school drafters using probably AC 14. Most of the departments are drawn in xrefs. However, probably 10+ people worked on this project of mapping the plant so nothing is the same. I cannot describe the frustration of inconsistencies of this drawing. Alas, my question: some of my xrefs are shown in literal dim lines, what is going on? When you go to the original xref, the lines are as bright as they always are. When the xref is in the main drawing, the lines are dimmer than everything else.
View 2 Replies View Related2012 drawings are not showing multi-leaders, when opened in 2007. We saved the 2012 drawings down to 2004. These same multileaders are not printing either.
View 7 Replies View Related
