I'm working on a drawing that has some plan views that I need to keep.. but I would like to import views from another drawing.
Is there a way to copy views from another drawing? Would be nice if when you insert another drawing as a block, it would bring the views along, same way that it brings along blocks, layers, linetypes.. etc.
[URL]
I'm using ACAD LT 2008.
When i try to copy paste some drawing entities from a heavy drawing file to any other file, the program blocks and says 'not responding', endlessly. So i always have to shutdown the program. I experience the same problem using the designcenter: when I try to copy a layout into another drawing, my computer gets stuck.
Another annoying problem with these files is that they are so heavy, while in fact they shouldn't be. I tried the aectoacad file command. In result the file id half as big, but after I open it and save it, again is the original size.
I need to put my 3d model on a piece of paper, so I need to have annotate and different views (FRONT and/or TOP and/or Right) of the model.
I tried to use FLATSPOT command, but all annotations (dimensions) are gone. Also, is there any easy way to do annotations?
I'm using Autocad LT 2012. If I draw in an isometric view, is there a way to look at each direction to see the different views? For instance if I make a cube, can I hatch all six sides with different colors to show if I'm looking at the correct view?
View 7 Replies View RelatedHow you constrain a section view so that is perpendicular to an axis. See "SECTION B" on the attached drawing for an example of what I am attempting. I have created the view but cannot make (constrain) the view perpendicular to the slot that is orientated at 30 degrees from the vertical centre line. I have lined up the view by eye so it looks close but it's obviously it's not accurate.
Product Design Suite
Inventor Premium 2012 - SP1 Installed
HP 8760w I7-740M Laptop
Windows 7 Professional 64
12 Gb DDR SDRAM
AMD FirePro M5950 Graphics Card
Been using Inventor from day one, never had a problem turning off the visibility of parts in darwing views till now.I cant hide parts in IDWs anymore.
* Select set to "Part Priority"... right click on a line in a drawing view... and "Visiblity" is grayed out.
* Browser Bar... find view of assembly, right click on a part.... and "Visiblity" is grayed out.
Working in an idw file, I have a need for two drawing sheets with the identical views of the same part. However, each sheet will need different dimensions and annotations. What I would like to do is after completing one sheet, in one step create the second identical sheet, then just edit/add dimensions and annotations. Is there a method to do this? So far, I have only been able to copy one view at a time from sheet to sheet.
View 2 Replies View RelatedI need to copy only the section views to other sheets.
View 2 Replies View Relatedi have various files which I cannot copy elements of into other drawings.
when i use the ctrol+copy command, I get the "copy to clipboard failed". This has only started since I upgraded to AutoCAD2012.
I have a problem with acad files. Almost every time i try copying objects from one acad file to another the program becomes unresponsive. It can be just a line. I am using acad 2007LT. The files usually are edited in acad 2007 LT and newer versions like 2010 and 2011
When i try to copy files the command line displays:
"_pasteclip duplicate definition of block _archtick ignored".
After this message is displayed nothing happens. Left the pc to process more than 15 minutes and still noting. Recently i tried inserting such a file as xref, but no luck. The progress bar gets to 99% and it stops.
File size makes no difference because it happens with small files as well as large. I have to say that this problem doesn't accure to all the files, but the majority have this problem.
My colleagues using 2007 lt have the same problem.
When I need to copy something between files I make it a block and use design center to move the block between files.
I'm using Autocad 2002.
I am having trouble copying out of a drawing (model space) which i received from someone else, and pasting into my own. The properties on the original dwg file suggest it was created Sept 2001. It appears to copy OK (copyclip/copybase), but when i jump into my file and try to paste, the command line just reads:
_pasteclip
and nothing appears in my model space.
I've tried zooming extents, exploding the original, changing layers and line types etc into the same as in my own dwg. I've also tried to convert/save the dwg file into dxf's and other version dwg's....without success.
I have about half a dozen drawings received from the same source, and they all let you copy data into them, but won't let you copy/cut out.
AutoCad Architecture 10, How can you copy blocks to different drawings?
View 2 Replies View RelatedI recently re-installed my AutoCad 2002 on an XP-SP2 computer.
I used to be able to do a windows copy or copy with basepoint and paste the item into another drawing.
Since I put AC on the XP computer, this does not work.
Is there a way to copy a viewport with all its layers setup from one drawing file to another drawing file?
I can copy the viewport and activate it, but the layers setup for that viewport goes to default. So it turns everything on.
I can't make a layer state in the old file and import in new file, because the new file does not have all the same layers. So not all my layers would be turned off in the viewport.
we got the big size file (file A), we fix it then we copy/ paste information (e.g. texts) from the other bad file (file B). File A becomes big size again although texts were copied is simple.
Question : How the best to copy these texts?
Normally when I hit move or copy there cursor will change to a square and I can click single items for the command. If I enter "c" on the command line and change to the cross cursor I can select multiple objects by clicking and dragging.
In some drawing the cursor will not change to a square and I can not enter "c" on the command line. I can select single objects but the cursor becomes the standard windows arrow.
Is there a setting / variable in the drawing that can affect this?
is there a way to cut/copy a view off of a sheet and paste it onto another sheet in the same exact location (paste aligned)?
For example i have three elevations on one sheet...i would like to keep one on that sheet and cut and paste the other two onto another sheet in the same locations...possible?
I've tried dragging layers across drawings using the design center interface, but what I've noticed is that while the layer in question gets copied over, the layer is empty. The objects within the layer do not get copied over. How do I copy objects AND layers that I've selected across drawings using Autocad Design Center?
View 5 Replies View RelatedI am really struggling with this and I am not sure why. I simpy want to place a camera or create a view of a 3d drawing and plot a 2d elevation. I want to be able to clip the view to only show that object.
Example: 3d duct drawing, duct risers, I want to pick on riser and arnage it on a viewport. I can get a camera placed but each time it defaults to a perspective view and when I change it to non-perspective the camera disapears.
So I setup a view but no matter what i do I cannot get the clipping to work correctly.
tutorial on createing 2d views of 3d drawings.
I don't want to use sectionplan or a live section the duct program I am using doesn't create actual cad style solids so that won't work.
I really can't beleive I cannot just select two points to determine the view direction and the apply it to the viewport. I have to be missing something.
Is there a way that once i have setup all my ucs & views, that i can easily export this information to another dwg without having to manually setup all of the different views again?
View 3 Replies View RelatedI started a new project. I linked a revit file. I copy monitored key levels from the linked file. The color of the level heads is black and this indicates that there are no associated plan views. My question is, what is the best way to create plan views from the copy monitored levels?
View 1 Replies View RelatedI'm trying to print / plot a drawing which has a mixture of 2D plans and 2 3D views. I have the drawing set-up with viewports in paperspace. The objects in one of the 3D views prints perfectly, yet some of the linework from the second 3D view won't print.
View 6 Replies View RelatedDView commands. We're using layout drawings of sites that are aligned with True North.
We've been using DView to rotate site layouts within model space in order to to align the layout better within the window and set up icons as such. And we have multiple Sheets set up with different information being displayed (ie different layers turned off). But when we go to the sheets, the Paper Space view still shows it's Original Orientation.
What I'd like to know is there a simple way to set the various different layouts to the same as Model Space, Without having to manually DView each Viewport as well?
...still happening in 2013...any answers out there? I'm getting pretty tired of redefining blocks (sending the wipeout to the back of the draw order) after pasting them into drawings.
View 4 Replies View RelatedI have a sheet drawing with all my background xref'd into it. How do I rotate the view in model space so it will show appropriately in the sheet view in paper space?
View 1 Replies View RelatedI am in paperspace applying dimensions to views. When making a new Mview and scaling the view all the diensions move to locations all over the drawing. Does something selected in the options I am not aware of?
View 4 Replies View RelatedI have a site plan that has buildings at different angles. How do I rotate my view so that the buildings are displayed at a normal x,y view?
View 1 Replies View RelatedI have a prob with my system in that when I close a drawing with a 3d view in a viewport and reopen it, I lose the 3D view and it flattens out, maintaining the view but losing all perspective. I can easily restore the saved view, but it is bit irritating.
View 4 Replies View RelatedI have 2 images that I need to see on 2 diferent views. On one view I need to see image A over image B. On the other view I need to see image B over image A. When I do the display order, it reflects on both views, so I have the same order on both views.
How can I avoid this, so that I can see different display orders depending on the view?
I am usinf AutoCAD 2010.
I've recently made a new drawing template with ilogic prompts for entering data for all fields within the template. It also sets view sizes etc. I have lots of master drawings, which are reused when sizes etc change for a contract, which i would like to transfer to this new template. Drawing Resource Transfer Wizard does not offer this function.
I could get all drawings in a folder copied to specific sheet size on the master template.As the template will probably be developed further in the future I'm very loathed to do this take manually.
I have a drawing with several views I've saved using the View Manager. Since creating the views, I have created some new layers. Now when I use View Manager to set an existing model space view current, the new layers are set to frozen. When I created the views, I un-checked the 'Save layer snapshot with view' checkbox.
I can thaw the new layers, then use the 'Update layers' button to correct this, but it's a hassle. Why is it freezig layers created after the view was created?
