I'm trying to print / plot a drawing which has a mixture of 2D plans and 2 3D views. I have the drawing set-up with viewports in paperspace. The objects in one of the 3D views prints perfectly, yet some of the linework from the second 3D view won't print.
View 6 RepliesIm working with Autocad 2012, havent done much with 3-d modeling. I have a model drawn and I simply want to print it with the top, front, right and an iso view on one piece of paper.
View 2 Replies View RelatedCan the Plot command be used to combine multiple drawing views into a single DWF file?
View 1 Replies View RelatedI am trying to create a second base view (using Layout/Create View/Base from model space). The problem is, I need it to be rotated from the original base view. However, when I rotate the part in model space, ALL of my views change.
So I guess my question is, how do I create multiple views of the same part that are seperate from the other base views?
I've been playing around with the print options for a while here, and can't seem to figure this out. I want to print multiple view ports on one page.
View 7 Replies View RelatedI'm working in Civil 3D 2012 and when I print to a .PDF with rotated views, the .PDF file is very large compared to file with non-rotated views. how to control the file size?
View 4 Replies View RelatedI'm hoping to be able to create 3D PDF to share with my clients. I want to be able to have them see 2D renderings and the 3D model at the same time with different views. Is this even possible?
View 2 Replies View Relatedhow to get the sections to center or to add a x, y offset distance.The only options I have found for placement are lower left, lower right, upper left, upper right.
View 1 Replies View RelatedI have no issues when using autocad for simple 2d drafting, layers and commands seem straightforward enough, but I am having real difficulty with the 3d interface when set up with 4 viewports, similar to Rhino (top, front, right and perspective)
Question #1: can I link the viewports so that moving around in 1 moves the other simultaneously to the same zoom and location?
Question #2: can I set up the MButtonPAN (or similar for orbit) command to orbit ONLY when in a perspective viewport? (in rhino, the right mouse button always orbits in a perspective viewport, and pressing shift with right mouse button can pan, ideally this is what I need or some variant of it). It seems very cumbersome to have to use the orbit button every time I want to adjust my perspective view!
Basically I want to make my workflow as similar to Rhino as possible, as it has become deeply engrained, and so far the crossover is not going well.
When I create multi sect views they plot 3 rows from left to right shown below:
0+00 1+00 2+00
I would like it to plot from bottom to top like shown below
2+00 5+00
1+00 4+00
0+00 3+00
Is there somewhere to adjust the settings?
I am trying to use plan production to generate sheets for a long, skinny corridor. I wanted to put two plans onto a single sheet.
I have tried a few settings, but get a duplicate of the same plan. Is this possible, or is necessary to do it manually.
I have created an assembly with multiple views to show the multiple configurations of our products. However, half way down the line I realized I had forgotten to place a component. When I placed the component, I found that it had been placed in all the views automatically. Is there a way to select the views to place the components in or to prevent the component from being placed in any of the custom views except the default view?
View 2 Replies View RelatedWhen creating multiple sections using the draft option what settings control how the sections are placed? For example, 5 across, 4 down.
edit - I have several alignments. One that has 8 section views is created with 4 across and 3 down, another with 18 sections is created with 5 across and 4 down and a third with 34 is created with 6 across and down. I'd like to be able to control this if possible.
How do I make multiple views (Front, Top, Side & Isometric) when driving an assembly constraint? I want to be able to show an assembly moving from different perspectives all at one time.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
Every time I try to create multiple section views in Civil 3D 2014 the system hangs and never generates the views. It looks as if it's processing but it never stops and never generates.
View 4 Replies View RelatedI am working on a corridor project where I have to make section views of the road. I created my sample lines by range of stations, and made all of my section views from there. Now I need to add volume tables for each section view.
I have 28 section views, and more to come when I do another set of sample lines for another road, and I don't feel like going through each section view individually to make volume tables for them.
Is there a way I can create total volume tables for all of my section views at the same time? It would save a lot of time!
I have created multiple sections and produced drawings, but now need to amend the design and provide 1 additional section on the drawings. I added an additional sample line to the sample line group and then updated the secion view layout but the additional section did not show in the multiple section view. Is there a way to add the additional section to the existing multiple section view? or do I need to go through the process of deleting the current sections and creating a new multiple section view that includes the new sample line?
View 1 Replies View RelatedHow can I set the multiple dimensions "ordinates" to scale correctly in base views. The old vanilla ordinate dims work fine, but power dims ordinate give me improper scaling.
View 2 Replies View RelatedThe new features in 2014 does not work. I can project solids to a section view but not to multiple section views.
View 1 Replies View RelatedI am attempting to create section views from a corridor. I have about 80 sections total that I would really like to stack 3 high...then just across the page. Any step by step that make this process easy to understand?
Right now I get 10 high then across the page (using 'draft' option). I've tried to make a dwt at a 10 scale, (setting the viewport at 10 scale and viewport as a 'section' in the properties), but when I use that, the sections start overlapping (this is using the 'production' option).
I have projected objects to multiple section views (ProjectObjectsToMultiSect) but now I want to remove them all. How do I remove all of the projected objects?
I can select an individual section view and go to the Projections tab in the Section View Properties and uncheck the projections, but how do I do this for all the views at once.
When creating multiple section views with production as the placement option, all the sections superimpose on top of each other. Attached graphic.
I tried to attach the .dwt file used for the multi section view, but the site doesn't allow upload of file extension .dwt.
Sometimes when i creating multiple views (sections) in section display option page there are nothing displaying.(surfaces).
View 2 Replies View RelatedI am really struggling with this and I am not sure why. I simpy want to place a camera or create a view of a 3d drawing and plot a 2d elevation. I want to be able to clip the view to only show that object.
Example: 3d duct drawing, duct risers, I want to pick on riser and arnage it on a viewport. I can get a camera placed but each time it defaults to a perspective view and when I change it to non-perspective the camera disapears.
So I setup a view but no matter what i do I cannot get the clipping to work correctly.
tutorial on createing 2d views of 3d drawings.
I don't want to use sectionplan or a live section the duct program I am using doesn't create actual cad style solids so that won't work.
I really can't beleive I cannot just select two points to determine the view direction and the apply it to the viewport. I have to be missing something.
Is there a way that once i have setup all my ucs & views, that i can easily export this information to another dwg without having to manually setup all of the different views again?
View 3 Replies View RelatedDView commands. We're using layout drawings of sites that are aligned with True North.
We've been using DView to rotate site layouts within model space in order to to align the layout better within the window and set up icons as such. And we have multiple Sheets set up with different information being displayed (ie different layers turned off). But when we go to the sheets, the Paper Space view still shows it's Original Orientation.
What I'd like to know is there a simple way to set the various different layouts to the same as Model Space, Without having to manually DView each Viewport as well?
I'm working on a drawing that has some plan views that I need to keep.. but I would like to import views from another drawing.
Is there a way to copy views from another drawing? Would be nice if when you insert another drawing as a block, it would bring the views along, same way that it brings along blocks, layers, linetypes.. etc.
[URL]
I have several different views xreffed into a single view, should'nt they all share the base construct? i.e. If I want to overlay the lighting plan, HVAC plan and my reflected ceiling plan- they should share the first floor construct. Instead each one brings in the same base construct and then when you overlay them, the walls interfere and you get wall errors.
View 9 Replies View RelatedI have a sheet drawing with all my background xref'd into it. How do I rotate the view in model space so it will show appropriately in the sheet view in paper space?
View 1 Replies View RelatedI am in paperspace applying dimensions to views. When making a new Mview and scaling the view all the diensions move to locations all over the drawing. Does something selected in the options I am not aware of?
View 4 Replies View RelatedI have a site plan that has buildings at different angles. How do I rotate my view so that the buildings are displayed at a normal x,y view?
View 1 Replies View Related