AutoCAD LT :: Selecting (duplicate) Line Under Another Line?
Feb 17, 2011Is there an easy way to do this, tabbing doesn't do it. I've always had trouble selecting a line buried under anothe one.
View 4 Replies
ADVERTISEMENT
AutoCAD VB :: Duplicate Line Reorganization
Oct 29, 2011I want to find out duplicate line present in document which i have required to do curtain operations (e.g change of linetype, colour)on it. In my code, i am holding AcadSelectionset which contains number of lines which may or may not be duplicate line. I want to these detect duplicate line and also the original line. Currently i am doing this by checking start and end point of all lines present in selection set.
View 7 Replies View RelatedAutoCAD Civil 3D :: Duplicate A Feature Line Report?
Apr 17, 2013I am trying to duplicate a feature line report I did a while ago. It has offsets,elevations,eastings and northings. What I would like is the offsets shown. I am in toolbox, reports manager, corridor, Feature Line Reports. When I create a report I get the list of feature lines which shows point codes which are back_curb,etw,...etc. When I create the file, all I get are the point code such as Back_Curb Left which shows the station, easting, northing and elevation. How do I get those offsets?
View 2 Replies View RelatedAutoCAD .NET :: Get Coordinate Of X / Y / Z By Selecting A Line
Jul 3, 2012I'd like to get the coordinate of X, Y, Z by selecting a line using C#, is there any sample code or references.
View 3 Replies View RelatedAutoCad :: Selecting A Hidden Line?
Nov 11, 2012I have drawn a black horizontal line 100mm long. Under that line a have a 100mm line coloured blue. How do I select the blue line? In AutoCAD 2000 I would hold down ctrl and select the line. Then scroll using the mouse pressing right click to select. I am currently using AutoCad2011. This function does not work.
View 4 Replies View RelatedAutoCad :: Deselecting Line After Selecting Bunch Of Lines?
Feb 20, 2013i'm use to using the shift key to deselect something. it doesn't seem to be working when i select a whole bunch of lines
View 3 Replies View RelatedAutoCAD .NET :: Selecting Lines Around Intersection Point With Reference Line?
Sep 17, 2011Is it possible to select lines (maybe up to 6 lines) around an intersection point with a reference line. There is one intersection point and the lines are around it. And also, both the intersecting lines are in different layers.
How to get the ObjectARX's ArxDbg tool working on autocad 2012. ObjectARX 2010 sample project fails to open in VS2010 express.
AutoCAD Civil 3D :: Pesky Selection Box Appears When Selecting Line?
May 11, 2011Everytime I do a command where I have to select something, such as move, copy, etc., this pesky "selection" box comes up. This started just a couple of days ago and is annoying. What setting I need to change to get the box to go away?
View 4 Replies View RelatedGIMP :: Selecting Just Single Line For Converting Into Path
Apr 11, 2012Let's say you just have a simple black line in Gimp. You then use the color select tool to select it, and you plan on then converting that Selection into a single line Path.
From:
Into:
You select the line, but the Selection tool actually travels a loop around the line. So, when you turn that Selection into a Path, you do not have a single line, but you instead have a loop.
So my question is this: is there any mechanism for making your Selection in GIMP just a single line so that it can then be converted into a Path?
Originally, I was trying to achieve this in Inkscape (and started a thread about it in the Inkscape forum). However, it appears that, although other Vector Art programs can achieve this, Inkscape cannot. So I was thinking that I could instead use Paths in GIMP instead, but this is not possible because of the nature of Selections, as far as I can tell.
Here's an attempt to illustrate this request:
AutoCad :: Options Window Not Display When Typing Options In Command Line Or Selecting From Drop Down
Jul 2, 2013The options window will not display when typing "options" in the command line or selecting from the drop down. The options menu has to be hidden somewhere because AutoCad will not allow any other commands after typing options until I hit escape. I have tried restarting CAD and rebooting my computer with not luck.
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Create Two Line MLEADER - Only Get One Line Of Text
Jul 18, 2012I'm trying to write a lisp routine to create a two line MLEADER but i can only get one line of text. Creating the MLEADER manually from the command line i just have to hit enter after the first line of text to add a second line. How would i do this in a lisp routine?
View 2 Replies View RelatedAutoCAD 2013 :: Pick An Existing Line To Create A New Line With Current Layer?
Sep 12, 2013For example, I'm making revisions to a plan and drag a block or xref of the floor plan changes where walls/doors/windows have moved. I want to be able to simply pick the underlying linework as opposed to tracing over each line of said xref/block.
View 8 Replies View RelatedAutoCAD Civil 3D :: Pipe Line With Thicker Appearance Than Typical Line Of Width 0
Mar 26, 2009I am looking to draw my pipe with a thicker appearance than the typical line of width "0". Our storm pipes are usually drawn with this so as to stand out from other utilities. If the pipe is represented by a polyline, I have usually adjusted the "Width" or "Global Width" value to my liking. With pipe objects, it seems more complicated. I have searched the settings, and the closest thing that I could find was the Lineweight property, but that appears to have no effect on the line thickness in the CAD drawing.
Do I need to tweak a plot setting? Make a new linetype altogether?
AutoCAD Civil 3D :: Remove Feature Line Used As Break Line When Creating Surface
Dec 11, 2012I needed to remove a feature line that I used as a break line when creating a surface. When I removed the feature line from the definition of the surface, the grading did not change. It appears the points created by the feature line remain which is why grading didn't change. The only work around was to delete these points.
I noticed the same thing happens when I removed the surface boundary and inserted a new boundary. why these points remain and how to remove when I delete boundary and feature line from surface?
AutoCAD Civil 3D :: Perpendicular Line From Point Laying On A Line / Pline
Sep 30, 2013 I have a line or a pline segment and i want to start a line from a point laying there and go perpendicular outwards. Is there a way to do it with tracking?
Yes, i saw the command draw line at an angle but i find it a little bit complicated for a simple task like that. I am sure autodesk have a simplest solution about that.
If i am already at the draw line mode and i can easy catch the tracking perpendicular to previous segment but if i want to start from another line and go perpendicular i cannot make the tracking work.
AutoCAD 2010 :: Can't Convert Multi Line Attributes To Single Line
Jan 22, 2010We are creating a new company title block for the use in Inventor 2010 and AutoCAd 2010. It has initially been generated in Inventor and exported to AutoCAD. My problem is that all attributes that came over are now setup as multiline attributes and I can't seem to change them to single line. Therefore you have to open the multiline editor separately for every single item to make changes in lieu of just 'tabbing' through the values in the Enhanced Attribute Editor. This adds time and frustration and seems to be intolerable for some of my colleagues.
Is there a way to change the attributes to a single line in AutoCAD I'm just not aware of? I tried to find different settings for the export from Inventor but the options seem to be very limited.
I could probably go over this and create separate AutoCad only titleblock and border but that would kind of defeat the purpose.
AutoCAD Civil 3D :: How To Create Intersection Line Between 2 Line Projection - Grading
Aug 24, 2012I have feature line with elevations that represents bottom of ditch and want to go UP 3:1 slope. also i have edge of road feature line that is higher than ditch and want to go 2% down until it hits side of the ditch that is 3:1. Any easiest way in civil 3d to create intersection line between ditch bottom going up 3:1 and edge of road going down 2%?
View 2 Replies View RelatedAutoCAD 2013 :: Select Line Then Enter Command - Line Unselects
Jun 28, 2012if I select a line, then enter the move command, the line unselects also when I select a line, then hit delete, the line is still there both of these used to work
2013 Civil 3D
AutoCAD Inventor :: Cursor Change To Draw Line But Line Doesn't Appear
Dec 5, 2011I have a problem with a recently downloaded version of Inventor. When I start a new drawing all I get is a blank blue screen instead of one with a grid display. If I start a line I can see the cursor change to draw the line but a line does not appear. I don't know if it something with how I installed the program or just system settings.
View 2 Replies View RelatedAutoCAD Map 3D :: Line Break In Text Label Doesn't Center 2nd Line Like It Does First
Feb 22, 2012I have an FDO layer which I am styling like so:
Concat ( FDO_LAYER1, Concat ( '
', FDO_LAYER2 ) )
This layer is styled so that all text is centered. In this case, FDO_LAYER2 is having it's text left aligned. I'm pretty sure this is due to the method I am using for a new line. Is there something else I can use to break the line and maintain the center styling?
Using a second point for FDO_LAYER2 is not an option.
AutoCAD .NET :: Write A Text On Command Line At Same Line And Overwrite Existing
Jun 10, 2011Basically I got a process which is quite long , let's say 30 seconds.
I want put a counter at command line showing to
user how many objects has been processed so far. But I don't want to use New Line Feed to change the line and keep each new number at same line and same location of command line.
AutoCAD Dynamic Blocks :: Green Line Changes Its Relationship To Dark Line
Dec 5, 2012The attached DynBlk needs to be Constrined. As an LT user I am unable to do so.If you rotate the block thru the range you will notice that the green line changes its relationship to the dark line.I would like for it to remain 5-1/2" from the dark line. (Truth be told I would like for it to stretch to 7-1/4 and 9-1/4 as well but that's another day.)
View 9 Replies View RelatedAutoCAD 2010 :: Custom Line Types Will Not Appear On Line Type Manager
Jun 14, 2012I created some new custom line types using express tool featute in autocad and I saved it with a .lin extension. It is only available in that drawing itself. How I canget those line type in all my new drawings.
I tired to edit the default linetype file even it doesnot appear in the linetype manger windo.
*IRRIGATION,IRRIGATION LINE
A,1,-.066042,["IRR",Standard,y=-.104589,s=.25],-.493243,1
*SEWARAGE,SEWARAGE LINE
A,1,-.031293,["SEW",Standard,y=-.104589,s=.25],-.651197,1
AutoCad :: How To Make Third Line Relative To Second Line So Angle Is 75 Degrees And A Certain Length
Oct 27, 2009I have been practicing using a older book(copyright 1990) and it has some decent exercises in it. I was able to do this one but it seems I can"t find the proper way to do this..First drawing a line a certain distance..ortho on,click the first point anywhere,move curser to the left and click again. that gives me a line at 180 degrees at what ever length..Line command again starting at the second point of the first line..after clicking that point,I type in @2.38<150 that gives me a line2.38 long at 150 degrees..now how do i make a third line relative to the second line so that the angle is 75 degrees and a certain length..the picture shows what I am trying to draw..using the polar cordinates you get an angle based off the UCS( which is set at world) when you try to draw the third line ..that makes the angle between line 2 an 3 not the angle that I want..To make the drawing,I rotated the ucs -30 degrees..But there has to be a better way than that..
View 9 Replies View RelatedAutoCad :: How To Not Make Curved Line Break Into Straight Line Segments
Jun 27, 2012I draw a curved line and would like it to remain as a curved line even after saving the file. However everytime after saving, and opening the file again, the curve breaks into many line segments, which is not what I want! I want the curved line that I draw to remain as a curved line even after saving and opening. How do I do that? I am using autocad2010.
I use the ARC command to draw a couple of lines, they look okay here. But after I saved it, and re-open it again, what previously appeared as curved lines changed in their appearance to polyline segments.
AutoCad :: Drawing Bottom Line With Angle Of 132 Relative To Middle Line
May 15, 2013angle.jpg
How can I draw the bottom line, with an angle of 132 relative to the middle line?
AutoCad :: Draw Straight Line Without Protractor Shaped Dotted Line / Unable To Set User Interface
Jan 22, 2012How can I draw a straight line without that protractor shaped dotted line following my cursor making it lag and also not snap correctly to the next line? Also, I have noticed that I can't set my user interface to auto cad classic settings. There seems to be no option for it in workspace settings.
View 3 Replies View RelatedAutoCAD Inventor :: How To Break Diameter Line Into Horizontal Line At End
Apr 12, 2013how to break diameter line into horizontal line at the end ?... there's no such option in editor style (I want to have 2 arrows for this diameter, not one as it is in editor options)
View 2 Replies View RelatedAutoCAD .NET :: Changing Color / Line Type And Line Weight
Mar 8, 2012How to change the Color, line type and Line weight for the Line using .Net.
View 9 Replies View RelatedAutoCAD Civil 3D :: Change Line Weight Of Profile Line
Jul 6, 2013I seem to be having trouble changing the lineweight of my profile line. I have changed the line weight in the layer properties, in the Profile properties and tried changed the line weight in the pen style. Everywhere I could think I try to make the line thicker but when I plot, the line is still the same and difficult to distinguish from the grid blocks of the profile view.
View 3 Replies View RelatedAutoCAD Inventor :: Reference Line - Hidden Line Removal?
Jan 24, 2012how to make the lines of a reference part that are in effect acting as hidden lines become removed from a view?
We've tried making the part phantom...which isn't right as we need the line representation of the part to be as the reference linestyle...
We've tried changing variables & tick boxes in the edit view dialogue boxes...but nothing works...