If you have had the issue with blue plotting purple with HP printers I discovered that its with the quality you set your printer at. If you plot draft or preview your blue will plot purple or a shade of purple. When I switched the quality to normal it fixed the issue. I called HP about the issue before I discovered this and they said update your drivers which mine were already.
View 1 RepliesBlue looks purple in Lightroom 4.
When viewed in Photoshop or Zoombrowser the blue looks ok.
if there were any plugins for fringe removal in photographs, i currently use the sponge tool or i mask off the offending area and use selective desaturation.
View 9 Replies View RelatedThe colour blue on my photoshop has turned into purple?
View 7 Replies View RelatedI am using WinXP/Home, Adobe RGB 1998 Color profile for both the image and Photoshop CS3. I print on Epson R2400, have freshly and properly installed inks and nozzles are not clogged. I have an image of a blue flower, and I do mean blue, not purple and not lavender. It is definitely blue on the monitor. It is blue in Bridge. It is blue in its jpg format and in its .psd format. When I print using the printer with Photoshop as color manager and print management off, the result is a purple flower. All the other colors in the image seem to be fine---green is green, yellowish is yellowish. When I print using printer color management(settings all properly done), NOT Photoshop's, I end up with a blue flower! Anyone with any ideas at all why this happens? I sure would appreciate knowing! I can do the workaround by letting the printer manage color, but seems to me that Photoshop really ought to be doing this. I have not noted problems with any other colors...only blue!
View 9 Replies View RelatedJust recently upgraded to Corel X6 and the colors suddenly changes. For example: A blue box changes to purple when I try to re-open the file I have previously saved. Also, embedded raster images turns to green.
View 10 Replies View RelatedWhen I go to open photos - they are opening in blue-green-purple colors as if a filter is being applied. The color pallette is also appearing with the same blue-purple colors. In the layers pallette - the icon of the image appears in the normal colors and no filters, etc. have been applied. It's all starting from when selecting the photo to be opened in photoshop.
View 1 Replies View RelatedI have a drawing where some lines have a 60% screening in there Plot Style. The print great from AutoCAD. But when I create a PDF and then print the PDF the Screened lines show up kind of blue / purple.
I am plotting to a Cannon iPF720 on 22x34 paper from Acrobat Reader X. I'm creating the PDF from AutoCAD 2012.
My insert script always plots different results(off by a little bit, but not much)... unless I manually paste them line by line which complete defeats the purpose of having a script.
(command "-insert" "RK_183" "8581,10812,0" 1 1 90)(command "-insert" "RK_183" "8581,10949,0" 1 1 90)(command "-insert" "RK_183" "8916,10812,0" 1 1 90)(command "-insert" "RK_183" "8916,11096,0" 1 1 90)(command "-insert" "RK_183" "8916,11234,0" 1 1 90)(command "-insert" "RK_183" "8581,11096,0" 1 1 90)(command "-insert" "RK_183" "8581,11234,0" 1 1 90)(command "-insert" "RK_183" "8581,11381,0" 1 1 90)(command "-insert" "RK_183" "8581,11518,0" 1 1 90)(command "-insert" "RK_183" "8916,11381,0" 1 1 90)(command "-insert" "RK_183" "8916,11518,0" 1 1 90)(command "-insert" "RK_183" "8916,11665,0" 1 1 90)
[code]...
I always try to use this wipeout command for electromechanical views that hide details so I don't have to trim line entities. I create pdf files then plot the pdf files to a printer. Why does the printed wipeout fill in black when printing?
View 7 Replies View Relatedfor years I used Epson r1800 on printer management it usually matches the monitor image quite well I had not had any success using adobe color mgmt in the past
the images I am printing are sRGB and now they don't match at all they are too dark and cool (bluish) If I change the monitor to the match the printer then all of my files will look bad on screen changing the printer setting did not seem to change the actual prints
I have my own party decoration business. I had to stop my printing services because out of the blue one day, my printer just messed up everything. I no longer have it as it broke down, but now I have the same problem with no matter what printer I use to print the same file. It's suppose to print purple, and it prints the purple parts pink. It turns the aqua blue into more of a royal blue. I am using Photoshop 7.0. It also did the same thing to me in CS2.
I have tried 4 different computers, 3 different printers, and 3 different operating systems.
In 2008, never had this issue.Just dumb, circles, and lines in a view port, that have hidden or center linetyoes assigned to them. When we go to plot using legacy hidden (this new for 2012?) the plot comes out with continuous lines. These are not solids. Just ordinary line entities.Now, when I change the shadeplot to "hidden" the linetype is shown correctly, but now my entities are coloured, when I just want my drawing to be black and white (going to PDF), even though all of the colours in the pen style are set to "Black".
Has this changed? Is there a new variable introduced?
When I try and draw a polyline it keeps snapping to blue squares - even though OSNAP is off. It says they are a 3D vertex when I hold the cursor near them. How to turn these off? I am only drafting simple sketches and don't need any 3D capabilities.
View 3 Replies View RelatedI attempted to copy with base point some blocks from one drawing to another and got a blue screen saying physical memory dump, and then my computer restarted. I tried the same thing using the insert as a block, but had the same problem. I am using autocad 2012
I'm running Windows 7, it says with 8gig ram, and video card is a Intel(r)hd graphics family. The computer is less than 2 weeks old.
I have done a drawing, and when I try to plot..The printer dialog doesn´t accept any of my installed printers.I have, for example an HP p1102, and when I select it as the printer device, de combo box closes and the selection is automatically changed to "none".
I have searched this issue in the Group, but I haven't seen any post talking about it.
Have a drawing that contains about 200 layers. When I open the layer dialog box, about 50 of the layers are highlighted in light blue. The layers appear to behave normally. Why they are highlighted?
View 5 Replies View RelatedEvery few weeks when opening a drawing, my computer restarts (just plain crashes windows and it restarts automatically). This only happens using AutoCAD, no other program has done this as of yet. I have no service packs installed and I haven't seen another post that refers to this problem. When I click on "Check for solution", nothing comes up.
View 8 Replies View RelatedIs there any way to prevent the DWG > PDF printer driver from exporting out the layers in the drawing. I want to issue PDF's to different people but I don't want them to accidently freeze or turn off layers.
View 4 Replies View RelatedI have an office with 3 network printers and 18 computers with Windows XP and AutoCAD + Revit 2010 installed. I never had issues related to printers I couldn't solve myself, but this time one of the machines decided not to allow me to use a specific printer (HP Designjet 70). When I select it, it quickly change the selected printer to "None". Its the only computer in the office with the issue, and I can't find out why. I already reinstalled the printer in many ways, even using other sharing paths, its useless. I imported AutoCAD settings from other machines, no use. Cleaned print spooler folder, reseted many settings to default, set it to off-line then on-line again, deleted useless PC3 files and everything that occurred to me, but still nothing changed it. The AutoCAD doesnt emmit errors, nothing, just refuse to accept the printer.
View 6 Replies View RelatedMy office is running into a printing issue, when different people are plotting off the same drawing file.
I've checked the .CTB file, all of us are using the same file, all .CTB parameters are identical, and no line weights have been set up within the layers, all are set to default, and no transparency has been used.
One man prints the file from AutoCAD2013, on a Windows 7-32bit computer, to our HP Laser Jet 8150N and his drawing comes out light.
I print the same drawing file from AutoCAD2012, on a Windows 7-32bit computer to the same printer with the same .CTB file and my drawing file prints dark. Much darker than his does.
We're having the same issue with other computers here in the office all printing to the same printer using exactly the same .CTB file. I've checked all the versions of Windows, and we're all using Windows 7 32-bit.
The only thing I can think of is that maybe we have different graphics cards as the computers have been purchased at different times.
I have one user that when trying to print to a color laser jet printer it only comes out in color. I even set the Plot style to monochrome.stb, (which is a network file that others use without issue) have Plot with plot styles checked, and even tried checking the black and white only in the printer properties. This is Autocad 2012.
Is there something I am missing to have the print out come out in black and white? Te print preview shows it in color.
Forgot to mention, if another user opens the drawing, it prints in black and white ok.
I need to print the drawing to PDF ISO A0 size but the output always in Portrait.how to change the black layout from Portrait to Landscape?
View 5 Replies View RelatedI'm currently using AutoCad Electrical 2010 and we just got a new printer. Is there any way to map all of my electrical drawngs to that printer without opening each drawing and selecting the new printer?
View 7 Replies View Relatedi have 1000 eps files to work with and i dont have the time to go to each one and change the color from blue to black! all are different shapes so i need a batch command that will keep the white, white and change any other color to black!
View 1 Replies View RelatedI'm using PSE 11 on a MacBook Pro. My Blue Skies have too much green in them for my preference. I'm sure there is a way to change this, but how? Also, can I change the default 'blue skies' to something more to my liking for a long-lasting remedy?
View 1 Replies View RelatedWe have two drafting assistants using LT 2010, with Windows XP. One is assigned to do record plotting, and uses our company standard .ctb file without any problems.
The second LT 2010 user has now been assigned to assist with record plotting. However, lineweights are plotting out about half the width of the specified .ctb file. We have double-checked all the ACAD LT & Windows plot settings, and they are identical for both drafting assistants.
Is there a system variable or other setting that I am missing?
Inventor RS 2011
AutoCAD Mechanical 2011
ASD 2013
Vault Collaboration 2011
Windows 7 Pro
The plots will not fit on the desired page correctly at large scale i.e sheets over A3 ! The preview even displays incorrectly i.e portrait only. All I want to do is print a dwg in landscape but it keep only printing half the page (The white sheet is always portrait) but the information is landscape !
View 9 Replies View RelatedI have an issue with ACAD 2010 where I import jpg shots into the drawing - often a google sketch up wireframe lightened image underneath my drawing - but when I go to plot a pdf, it shows in the print preview, but when the plot is completed, the sketchup image is not shown.
View 3 Replies View RelatedI want to add a sort of legend / information box to my drawings, in a manner where it can remain constant and in the same place every time I print but I can edit the information therein. I guess that means making up a template, but I'm stuck beyond that.
Having robbed this picture from the Google image search:
I want to make that table at the top. Maybe add a company logo, the title, scale, author, etc. I'm sure you know the score. But I was hoping I could do it in such a way where I've only got to draw it once and all future drawings I can simply edit the specifics and add it to all drawings, regardless of size or scale.
I normally draw things with a pencil and drawing board and believe me during this learning process there have already been too many times where I'm tempted to go back!
I am having trouble getting a DXF underlay to plot clearly and boldly. I insert the ref to the dxf, then, in paperspace, create viewport, etc. I plot all files to pdf (seperate install) for record purposes. When plotting this file, the dxf is very faint--even though the preview is very bold and dark.
View 4 Replies View Related