I attempted to copy with base point some blocks from one drawing to another and got a blue screen saying physical memory dump, and then my computer restarted. I tried the same thing using the insert as a block, but had the same problem. I am using autocad 2012
I'm running Windows 7, it says with 8gig ram, and video card is a Intel(r)hd graphics family. The computer is less than 2 weeks old.
Every few weeks when opening a drawing, my computer restarts (just plain crashes windows and it restarts automatically). This only happens using AutoCAD, no other program has done this as of yet. I have no service packs installed and I haven't seen another post that refers to this problem. When I click on "Check for solution", nothing comes up.
View 8 Replies View RelatedI have used "Share My Screen" meeting feature a few times on my machine.
a client and it gave me the blue screen of death crash and forced a restart. After it did this 3 times I gave up.
Windows XP Home 2002 SP3
PhotoshopCS4 Extended
CS4 Production Premium
RADEON X300 SE 128MB Hypermemory
Intel Pentium (R) CPU 3.00 GHz 2.99 Ghz
2.50 GB RAM
Jusy wanted to know how would I go about copying this image. I want everything the same besides the coloured shapes. I want to be able to edit the image. As when I try to trace over it with the pen tool I can never get it to look the same. What would be the easiest way? or would photoshop be better suited for copying the images without the blue and pink shapes?
View 3 Replies View RelatedWhen I copy, I only get an outline of what im copying in blue lines.
I must have played in the settings somewhere.. how to put them back?
One of my end users reports to me that his computer has been crashing. We soon learn that it crashes every time he starts AutoCad LT 2006.
What I have done so far is completely removed autocad and all associated programs. Reinistalled, installed a newer version (Autocad LT 2007), upgraded to the latest bios and firmware on the machine. Replaced the RAM, and just about everything else under the sun and this machine still crashes every time you start auto cad. I asked the user when the last time was that it worked and he said he was using it about a month ago just fine.
I installed the program on my identical laptop and it works just fine.
I ran the BSOD via Kernel mode through WinDBG and it points to ACPI.SYS. Being that this is a heavy system driver file, need getting this program to actually work short of me reinstalling the entire OS on the machine? The stop error is the 0x00000050 memory error.
Every now and then, but recently more then I want, I get a blue screen while doing a stress analysis.
I have a pretty simple assembly with just 2 parts in it. One of these parts is built as a multibody part. It can be that the blue screens started to occur after I made a multibody design, however I am not sure about that. I downloaded and installed Inventor R13.
Everytime I try to open files created from Microstaion but saved as CAD it blue screens my computer! I have a newer laptop with Windows 7. However, an older computer in our office with Windows XP can open these files with no problem? Both computers have AutoCAD LT 2012.
View 1 Replies View RelatedI have an issue where in Photoshop, opening a menu and clicking on something like, File > New or any other option, will leave a blue shadow on my screen, of that menu item. It persists over every program until I restart the computer, even if Photoshop has been closed. This has only happened in the last week.
Â
Is this an issue with Photoshop, or is it my computer?
Windows Vista Home PremiumHP Pavillion m7790yPSE 7.plenty of space on the hard discs and plenty of RAM. PSE 7 worled fine for months until a few days ago. Now, when I launch 7, the initial welcome screen (chose Organizer, Editor etc) appears for half a second, then the conmpture crashes with a blue screen error message saying that a bad driver was detected that caused the computer to shut down. Here are all the things I have tried - none worked. I did a deep scan in Safe Mode with my antivirus - results cleanI ran the Winodws utilities to check for errors in memory and hard drive - results clean.I used the Windows driver updater to update each and every driver - no failures.I reinstalled PSE 7I reinstalled my HP printer softwareI read the Windows event manager messages about this crash and all that it says is that I have a driver problem.
View 3 Replies View RelatedI recently built a PC for photo editing, and I am receiving the BSOD at different points when Lightroom is open. The first time it happened was when I was moving about 1000 raw files from one folder to another (did it twice to me doing that). From there, I grabbed the latest video card driver from Nvidia, and I also went into the bios and set my memory back to "Auto" rather than 1600 (which is what it's rated for). Thought maybe it was hardware related. Everything was going fine, I did some editing, and then while it was just sitting there with LR3 open, I got the BSOD again.Â
Â
Here is what I'm running:
Â
CPU - i7 3.4ghz 2600k
Mobo - Asus P8Z68-V LX LGA 1155 Intel Z68
RAM - G.SKILL Ripjaws X Series 8GB 240-Pin DDR3 SDRAM DDR3 1600
System SSD - Corsair Force Series GT CSSD-F120GBGT-BK 2.5" 120GB SATA III
    -I have Windows 7 64-bit, Photoshop CS5.5 and Lightroom 3 installed on this drive and I also have current project photo files stored on this. Once done editing, I export them to a 1TB HDD.
Video - EVGA GeForce GTX 560 (Fermi) 1GB
 Â
Here are the details after logging into Windows after the crash:
Problem signature:
Problem Event Name:Â Â Â Â Â Â Â Â Â BlueScreen
OS Version:Â Â Â Â Â Â Â Â Â 6.1.7601.2.1.0.256.48
Locale ID:Â Â Â Â Â Â Â Â Â 1033
[Code]....
The program opens normally and after 3-5 seconds I get a blue screen crash. Just before the crash, photoshop displays a message about a problem with the display driver and GPU. I am unable to read the entire message before the system crashes. I re-installed the video driver and CS4 but the problem persists.
Â
This is a recent phenomena (two days ago). The program operated normally with the current OS/software/hardware configuration for over a year.Windows 7, SP1 (64-bit)Intel Core2 Q9550 @ 2.83gzh, 8gb RAMNVIDIA GeForce GTX 550 Ti video card (updated driver)
I capture a lot of brochures from holiday trips etc including outline maps of local areas. I then add rthese to albums, shows etc.
When I scan these, they frequently include a significant blue (sometimes grey) tint most noticeable at the edges or on folds in the items being scanned, presumably representing areas where the contact between the document and the glass is not quite as good as elsewhere.
I've tried weighing down the scanner lid, but I've not noticed any noticeable improvement.I'm now playing with the settings to see if I shoude be tweaking anything to improve this.
In the meantime, I'm left with a number of docs to clean. I've been doing this with the clone tool, but it is very time consuming.
I had a blue screen while working with Lightroom and now I can not open catalog. I got this window: recover data from the directory? Option "Import from another catalog" also does not work.
View 2 Replies View RelatedI asked this last year, but never figured it out.
I am an AutoCAD user, not a Computer wiz, so the "obvious" isn't always so, to me.
I have my Office AutoCAD set up the way I like it.
I have an AutoCAD at Home that I'd like to have the screen appear the same.
How and Where do I find my Workspace settings?
How and Where do I put it at Home?
This happened 3-4 times when I was using the trial version and I wasn't sure which program from the trials that was doing it, but it started after I downloaded and used the Adobe Clound trials so I stopped using them. Eventually I went ahead and upgraded to the subcription and have been using Illustrator and Muse for a few days now and have not had a problem until today. I had Photoshop open and minimized, as well as Illustrator, and walked away from my desk. When I returned, the screen was blue with the Windows "shut down to prevent further damage" screen. I have a photo of the message. I realized that I had been using Photoshop the last few times this happened also. It never happened before I tried this software and stopped when I stopped using the trial.
View 11 Replies View RelatedFor some reason the 'Full Screen Mode with Menu Bar' option has a blue background now. The background used to be gray, and then one time i opened up Photoshop and now the background is blue. It is very annoying and affects my painting. The grey was neutral, now it is blue so my colors are going to appear off.
If you don't know what i mean: Open Photoshop, make a canvas (new image) Hit the key "F" on your keyboard 2 times so the canvas takes up the entire page but the menu bars are still up. The color around the canvas is Blue, when it has ALWAYS been gray.
My computer has been extremely stable for the past few years without a single BSOD... Until recently when I updated LR4 to LR5.
Â
After a good 15-20minutes within the program, all of a sudden it will BSOD. It does not happen doing ANYTHING else with the computer, including gaming such as FSX and other simulators which can be very heavy on the GPU/Memory/etc...
Â
I ran memtest and it passed.HD Tune on my HD's, no errors.I reduced my overlock to be sure it was not a voltage issue or something, but same results. Prime95, passed.
Â
I tried doing a "Repair" with the LR5 installer file, but it still happened.
Â
Windows 7 - 64bit professional edition
Intel i7 2600K CPU
16GB DDR3 Ram
570GTX GPU
Â
Lightroom is running off my 120GB SSD Drive, with it's catalog on my 2.5TB internal HD (one of a few).Updated my GPU drivers (clean install) and ran windows driver verifier to make sure all drivers were "proper".
Â
I have a very important shoot I am trying to process and this is a big bummer right now... Again, been using LR4 every since it was released and never had a BSOD... Right after I upgrade, it starts happening once things start get a bit demanding (quick editing or quick adjustments). I have not noticed a trend when it does crash, but it may have something to do with the crop and/or straighten tool... I have noticed it has BSOD on me when doing some of those, but I believe other times as well. I will make sure to pay attention from now on to report any reliable trends when it happens.
I have been trying to figure out how to copy a Layout from one DWG to another. I know there are several threads about this, and I have tried the methods they reccomend, but I am having an unusual problem.
I have been trying to open a Layout by using the "from Template" option for creating a new Layout, then opening the DWG containing the desired Layout. It works, but everything drawn in model space ends up compressed into the lower left corner and there is nothing in model space. So, the paper space information from the Layout is being imported, but the drawing info is getting mixed up somehow.
I have tried using the Design Center with identical results.
I am doing electrical drawings with the architect giving me an exported DWG from Vectorworks. I have XREF the background drawing that when opened is about 6 blocks of the building background and 2 blocks of the electrical devices.
Here is the problem: The architect sent me an updated DWG that only has the electrical updates without any backgrounds. My thought was to purge all and then select all the items and then copy with basepoint. Then open the original architects XREF drawing. Select those two electrical block, erase them (or move them to the size a fixed distance). Then paste as block from the other file. Then move the block to the correct location, explode, done.
Big problem: I just tons of this error in the command line referencing different block group numbers being ignored:
Duplicate definition of block Group-1265-1Â ignored.
Then the block that was pasted added a background that wasn't in the old drawing and many of the items in that block was either missing or still had the old symbols. Can't figure out how to update the background with confidence that it is really updated with new information and not keeping old.
If I open a new drawing and paste that block in, everything comes in perfectly
Got a question regarding copying in viewports that are in the paper space. Basically i have a model space where the whole drawing is kept and bunch of other paper space tabs/layouts that have viewports in them. Now the problem is when i have to do a quick fix in paper space, ill double click to go "inside" the viewport to i can edit it. While inside the viewport i would do CTRL-C on some objects or text and after that suddenly autocad would crash and windows would say Autodesk Application has stopped working, and you can only click cancel and when you do it just closes AutoCad. I dont know if this is a bug or is it due to memory management. I have 8Gb of Ram on the machine and running AutoCad 2012 LT.
View 1 Replies View RelatedWhen I try and draw a polyline it keeps snapping to blue squares - even though OSNAP is off. It says they are a 3D vertex when I hold the cursor near them. How to turn these off? I am only drafting simple sketches and don't need any 3D capabilities.
View 3 Replies View Related I've just started using Photoshop CS6 via Creative cloud. (Before i used a DVD version of CS5)I'm having a weird problem with the liquify filter:When I want to open a picture in the filter it shows only a blue screen... Why? What happened?
Â
At first I thought maybe it couldn't'nt work with the dng format and then I tried opening a jpeg in the liquify filter, same problem.I've had no problems in CS5 and I'm working on the same computer.
Doing a photo merge of 6 different pictures, I have a systemic blue screen crash using Photoshop CS6 extended. There is a win32k.sys error message (page fault in non paged area).
Â
I tried my photo merge 5 times (once with only 2 pictures) and it always crashed. I have 32 Gb RAM and a i7 3960-X CPU + a GeForce 690 GPU.
When I open PS my powerbook screen turns a a light blue like a photofilter had been applied to it. The second I shot down the app, my screen color returns to normal. This only happens with PS not LR, AI or any other app I have. Also it just started last night and is continuing to be troublesome today. Obviuose I cannot properly correct photos when everything has a blue tint to it.
View 2 Replies View RelatedI am having problems with my rendering,  yesterday everything was working fine but today every time i set rendering quality higher than draft, Revit either fails to render (rendering area goes black) or the pc crashes and i get bluescreen.Â
View 6 Replies View RelatedMy PC will crash when attempting to export in Premiere Pro, I will get the blue screen.
Â
I ran a memory diagnostic test to see if it was the ram, it did not come back as having faulty ram.
Â
Somtimes the pc will just freeze too.
Â
Seems like this only happens with adobe.
Â
I somtimes could export a file after attempting 2-3 times but now it crashes almost every time.
Â
I have tried many different export formats but it seems to not be limited to just one format, it happens with all formats.
Â
I have tried to find a solution but I still have not.
Â
Here are my PC specs:
Â
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name
System Manufacturer To Be Filled By O.E.M.
System Model To Be Filled By O.E.M.
System Type x64-based PC
Processor AMD A6-3670 APU with Radeon(tm) HD Graphics, 3000 Mhz, 4 Core(s), 4 Logical Processor(s)
[code]....
In some drawings the viewports automatically display viewport objects when I copy them and some they do not. There must be a systems variable and I searched through the systems variable tool in the Express tools and couldn't find it. How to get consistent results when copying viewports.
View 6 Replies View RelatedWhen I click on the PS 10 the organizer rectangle comes up, but, when I click it the blue screen freezes at the initializing model point and won't go to the list of albums. But, if I click on the Edit, instead, the blue screen goes to the full page with its fix tools. If I click on show items in the bin the whole list of usable albums comes up. I have run every fix and scan I can think of. Premier elements does the same, but, CS6 is fine.
View 3 Replies View RelatedCopy and pasting from the AutoCAD to the Word keeping the scale,
Â
I’m wondering if there is a way to copy/paste or export, etc the drawings from the AutoCAD to the MS Word such that the scale of the drawings is kept correct.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I have run into a problem with AutoCAD 2010 while trying to copy paste within 2 different drawings. Copying blocks from 1 sheet to another causes this error message "_pasteclip *Invalid*" It wont let me copy in the blocks. Sometimes after that happens all i need to do is a regen command and it fixes it. Other times im forced to switch to model space and then back to paperspace which then lets me paste the objects. This is not isolated to my computer, it happens on other computers here in the office.
View 2 Replies View Related