Photoshop :: Why Computer Crash To Blue Screen With Message
Sep 5, 2012
This happened 3-4 times when I was using the trial version and I wasn't sure which program from the trials that was doing it, but it started after I downloaded and used the Adobe Clound trials so I stopped using them. Eventually I went ahead and upgraded to the subcription and have been using Illustrator and Muse for a few days now and have not had a problem until today. I had Photoshop open and minimized, as well as Illustrator, and walked away from my desk. When I returned, the screen was blue with the Windows "shut down to prevent further damage" screen. I have a photo of the message. I realized that I had been using Photoshop the last few times this happened also. It never happened before I tried this software and stopped when I stopped using the trial.
Doing a photo merge of 6 different pictures, I have a systemic blue screen crash using Photoshop CS6 extended. There is a win32k.sys error message (page fault in non paged area). Â I tried my photo merge 5 times (once with only 2 pictures) and it always crashed. I have 32 Gb RAM and a i7 3960-X CPU + a GeForce 690 GPU.
I have used "Share My Screen" meeting feature a few times on my machine.
a client and it gave me the blue screen of death crash and forced a restart. After it did this 3 times I gave up.
Windows XP Home 2002 SP3 PhotoshopCS4 Extended CS4 Production Premium RADEON X300 SE 128MB Hypermemory Intel Pentium (R) CPU 3.00 GHz 2.99 Ghz 2.50 GB RAM
The program opens normally and after 3-5 seconds I get a blue screen crash. Just before the crash, photoshop displays a message about a problem with the display driver and GPU. I am unable to read the entire message before the system crashes. I re-installed the video driver and CS4 but the problem persists.  This is a recent phenomena (two days ago). The program operated normally with the current OS/software/hardware configuration for over a year.Windows 7, SP1 (64-bit)Intel Core2 Q9550 @ 2.83gzh, 8gb RAMNVIDIA GeForce GTX 550 Ti video card (updated driver)
Windows XP on an HP Pavilion. Had to use Restore. PS 7 still on computer but cannot open program. Get a message "could not complete your request because of missing or invalid personalization information."
I have installed Photoshop CS5 on a coupel of comupters(XP) and I get following error when I start it. The user are useing mandatory porfiles NTUSER.MAN.   AppName:photoshop.exe    AppVer: 12.0.1.0 ModName:scriptingsupport.8li ModVer:10.0.0.0    Offset:000d183a
I have a DELL XPS 1330. The computer stopped working while I was visiting another country. The support people there had me reinstall VISTA on my computer thus ALL my programs were taken away.
Well, turns out that was not the problem. 2 weeks later the same problem happened. The laptop is not repaired and I want to reinstall my CS3 Extended version. Can I just insert the disc and reinstall it to my computer?
I am pretty computer illiterate on some things but can follow directions when they are given. I have not installed the program on any other computer b/c I thought it was registered to me on my laptop and did not want to mess that up for when mine was finally repaired.
Adobe Update Manager says all programs up to date. Crashes most frequently occur when using Blur or other Filters. 12.0.4 says it applies to AMD Catalyst, but my PC has Intel processor. It says it applies to CS6, but I have PS 5.1.Â
Whenever I launch 3dsMax 2012, it crashes without any kind of error message, apart from the Windows one that gives no details at all.The launcher goes up to the "Starting 3ds Max" step and then stops.I tried to desinstall/reinstall, different languages (I'm French but I'd rather use the English version). I also deleted the .ini just so the program could recreate one but it did nothing.
In fact it worked once or twice, I could launch & use it normaly, but then it stopped working..I'm using Windows 7 64bits SP1 on an Intel i5 2410M, GeForce GT550M, all my drivers seem to be updated, etc.
I have an issue where in Photoshop, opening a menu and clicking on something like, File > New or any other option, will leave a blue shadow on my screen, of that menu item. It persists over every program until I restart the computer, even if Photoshop has been closed. This has only happened in the last week. Â Is this an issue with Photoshop, or is it my computer?
Windows Vista Home PremiumHP Pavillion m7790yPSE 7.plenty of space on the hard discs and plenty of RAM. PSE 7 worled fine for months until a few days ago. Now, when I launch 7, the initial welcome screen (chose Organizer, Editor etc) appears for half a second, then the conmpture crashes with a blue screen error message saying that a bad driver was detected that caused the computer to shut down. Here are all the things I have tried - none worked. I did a deep scan in Safe Mode with my antivirus - results cleanI ran the Winodws utilities to check for errors in memory and hard drive - results clean.I used the Windows driver updater to update each and every driver - no failures.I reinstalled PSE 7I reinstalled my HP printer softwareI read the Windows event manager messages about this crash and all that it says is that I have a driver problem.
Recently I downloaded a driver tuner for ATI drivers which have become inactive on my computer or outdated. Don't know if this has anything to do with this recent message in Photoshop Elements. I tried to manage photos in Elements and got the error message 150:30 and was told to restart my computer. I've restarted twice and given up.
I capture a lot of brochures from holiday trips etc including outline maps of local areas. I then add rthese to albums, shows etc.
When I scan these, they frequently include a significant blue (sometimes grey) tint most noticeable at the edges or on folds in the items being scanned, presumably representing areas where the contact between the document and the glass is not quite as good as elsewhere.
I've tried weighing down the scanner lid, but I've not noticed any noticeable improvement.I'm now playing with the settings to see if I shoude be tweaking anything to improve this.
In the meantime, I'm left with a number of docs to clean. I've been doing this with the clone tool, but it is very time consuming.
For some reason the 'Full Screen Mode with Menu Bar' option has a blue background now. The background used to be gray, and then one time i opened up Photoshop and now the background is blue. It is very annoying and affects my painting. The grey was neutral, now it is blue so my colors are going to appear off.
If you don't know what i mean: Open Photoshop, make a canvas (new image) Hit the key "F" on your keyboard 2 times so the canvas takes up the entire page but the menu bars are still up. The color around the canvas is Blue, when it has ALWAYS been gray.
I've just started using Photoshop CS6 via Creative cloud. (Before i used a DVD version of CS5)I'm having a weird problem with the liquify filter:When I want to open a picture in the filter it shows only a blue screen... Why? What happened? Â At first I thought maybe it couldn't'nt work with the dng format and then I tried opening a jpeg in the liquify filter, same problem.I've had no problems in CS5 and I'm working on the same computer.
When I open PS my powerbook screen turns a a light blue like a photofilter had been applied to it. The second I shot down the app, my screen color returns to normal. This only happens with PS not LR, AI or any other app I have. Also it just started last night and is continuing to be troublesome today. Obviuose I cannot properly correct photos when everything has a blue tint to it.
If I open more than two large files (30-40mb in size) and I try to drag the images around the screen, it will hang or not finish redrawing the image in it's new location. Sometimes it will crash PS.
XP Pro-Dual processor-4 gig rams-7900GS/256mb video card Dell 30" WFP monitor.
Doesn't happen with CS2. Is this a bug in CS3, or does it need more video ram? Would a ram card with 512mb
When I click on the PS 10 the organizer rectangle comes up, but, when I click it the blue screen freezes at the initializing model point and won't go to the list of albums. But, if I click on the Edit, instead, the blue screen goes to the full page with its fix tools. If I click on show items in the bin the whole list of usable albums comes up. I have run every fix and scan I can think of. Premier elements does the same, but, CS6 is fine.
I recently built a PC for photo editing, and I am receiving the BSOD at different points when Lightroom is open. The first time it happened was when I was moving about 1000 raw files from one folder to another (did it twice to me doing that). From there, I grabbed the latest video card driver from Nvidia, and I also went into the bios and set my memory back to "Auto" rather than 1600 (which is what it's rated for). Thought maybe it was hardware related. Everything was going fine, I did some editing, and then while it was just sitting there with LR3 open, I got the BSOD again.  Here is what I'm running:  CPU - i7 3.4ghz 2600k Mobo - Asus P8Z68-V LX LGA 1155 Intel Z68 RAM - G.SKILL Ripjaws X Series 8GB 240-Pin DDR3 SDRAM DDR3 1600 System SSD - Corsair Force Series GT CSSD-F120GBGT-BK 2.5" 120GB SATA III     -I have Windows 7 64-bit, Photoshop CS5.5 and Lightroom 3 installed on this drive and I also have current project photo files stored on this. Once done editing, I export them to a 1TB HDD. Video - EVGA GeForce GTX 560 (Fermi) 1GB   Here are the details after logging into Windows after the crash:
Problem signature: Problem Event Name:Â Â Â Â Â Â Â Â Â BlueScreen OS Version:Â Â Â Â Â Â Â Â Â 6.1.7601.2.1.0.256.48 Locale ID:Â Â Â Â Â Â Â Â Â 1033
I am shooting RAW and opening in Photoshop CS3 with AdobeRGB profile. My desktop NEC LCD screen displays the images correctly. I recently purchased a HP Pavilion dv9910us laptop, and it exhibits some posterization, even at the best screen angle. I'm wondering if this is a problem I will be able to solve or if it is a limitation of the hardware.
17 in. WXGA screen nVidia GeForce 7150M (shares memory) 3 GB RAM AMD Turion 64 X2 TL-60 Vista 32 bit SP1
Color is set to 32 bit, Powerplan to High performance. The monitor has no specific profile. It is set to generic PNP. My older SpyderPro doesn't work with Visa, so I can't create a profile for the monitor (unless I upgrade to Spyder3.
I specifically chose a laptop that had a graphics subsystem, so this posterization is disappointing to me.
I recently installed Elements 7 on my new Win 8 computer. I also downloaded a 7.03 patch from Adobe site. When the program is launched, and then sitting idle, the mouse pointer jumps around on the screen, and the "working" blue circle appears also. This happens constantly and consistently about every second. I do not have this happen with any other program.  I was having similar issues with Elements and Win 7, and XP, and Win 98 for that matter.Â
I attempted to copy with base point some blocks from one drawing to another and got a blue screen saying physical memory dump, and then my computer restarted. I tried the same thing using the insert as a block, but had the same problem. I am using autocad 2012
I'm running Windows 7, it says with 8gig ram, and video card is a Intel(r)hd graphics family. The computer is less than 2 weeks old.
One of my end users reports to me that his computer has been crashing. We soon learn that it crashes every time he starts AutoCad LT 2006.
What I have done so far is completely removed autocad and all associated programs. Reinistalled, installed a newer version (Autocad LT 2007), upgraded to the latest bios and firmware on the machine. Replaced the RAM, and just about everything else under the sun and this machine still crashes every time you start auto cad. I asked the user when the last time was that it worked and he said he was using it about a month ago just fine.
I installed the program on my identical laptop and it works just fine.
I ran the BSOD via Kernel mode through WinDBG and it points to ACPI.SYS. Being that this is a heavy system driver file, need getting this program to actually work short of me reinstalling the entire OS on the machine? The stop error is the 0x00000050 memory error.
Every now and then, but recently more then I want, I get a blue screen while doing a stress analysis.
I have a pretty simple assembly with just 2 parts in it. One of these parts is built as a multibody part. It can be that the blue screens started to occur after I made a multibody design, however I am not sure about that. I downloaded and installed Inventor R13.
I had a blue screen while working with Lightroom and now I can not open catalog. I got this window: recover data from the directory? Option "Import from another catalog" also does not work.
i''ve a problem. After i had removed photoshop CS4 on windows 8. It's still in my config screen.When i push 'remove' i get a message that 'the installationfile is corrupt'. This is also the message when i try to re-installphotoshop 4. I removed all adobefiles in the regedit and msconfig
Every few weeks when opening a drawing, my computer restarts (just plain crashes windows and it restarts automatically). This only happens using AutoCAD, no other program has done this as of yet. I have no service packs installed and I haven't seen another post that refers to this problem. When I click on "Check for solution", nothing comes up.
My computer has been extremely stable for the past few years without a single BSOD... Until recently when I updated LR4 to LR5. Â After a good 15-20minutes within the program, all of a sudden it will BSOD. It does not happen doing ANYTHING else with the computer, including gaming such as FSX and other simulators which can be very heavy on the GPU/Memory/etc... Â I ran memtest and it passed.HD Tune on my HD's, no errors.I reduced my overlock to be sure it was not a voltage issue or something, but same results. Prime95, passed. Â I tried doing a "Repair" with the LR5 installer file, but it still happened. Â Windows 7 - 64bit professional edition Intel i7 2600K CPU 16GB DDR3 Ram 570GTX GPU Â Lightroom is running off my 120GB SSD Drive, with it's catalog on my 2.5TB internal HD (one of a few).Updated my GPU drivers (clean install) and ran windows driver verifier to make sure all drivers were "proper". Â I have a very important shoot I am trying to process and this is a big bummer right now... Again, been using LR4 every since it was released and never had a BSOD... Right after I upgrade, it starts happening once things start get a bit demanding (quick editing or quick adjustments). I have not noticed a trend when it does crash, but it may have something to do with the crop and/or straighten tool... I have noticed it has BSOD on me when doing some of those, but I believe other times as well. I will make sure to pay attention from now on to report any reliable trends when it happens.
Everytime I try to open files created from Microstaion but saved as CAD it blue screens my computer! I have a newer laptop with Windows 7. However, an older computer in our office with Windows XP can open these files with no problem? Both computers have AutoCAD LT 2012.
