i''ve a problem. After i had removed photoshop CS4 on windows 8. It's still in my config screen.When i push 'remove' i get a message that 'the installationfile is corrupt'. This is also the message when i try to re-installphotoshop 4. I removed all adobefiles in the regedit and msconfig
View 1 RepliesWhy I cannot remove the ISO b1 full bleed from this plot config file?
I never print metric so there is no need to for it.
This happened 3-4 times when I was using the trial version and I wasn't sure which program from the trials that was doing it, but it started after I downloaded and used the Adobe Clound trials so I stopped using them. Eventually I went ahead and upgraded to the subcription and have been using Illustrator and Muse for a few days now and have not had a problem until today. I had Photoshop open and minimized, as well as Illustrator, and walked away from my desk. When I returned, the screen was blue with the Windows "shut down to prevent further damage" screen. I have a photo of the message. I realized that I had been using Photoshop the last few times this happened also. It never happened before I tried this software and stopped when I stopped using the trial.
View 11 Replies View RelatedI wanted to try adobe's Lightroom and downloaded and installed the trial version. I have decided not to purchase at this time and attempted to uninstall the product. I beleive it is crashing my computer as it is the only new program i have installed in literally years. This is the error message I am receiving.
Error opening installation log file. Verify that the specified log file location exists and is writable.
how to remove following message which appears when i open new / file existing file. This also changes my settings and autocad does not work properly.
View 4 Replies View RelatedI have the following code to delete all hatch in a drawing. At the end of the command there is a notice that all hatch have been eliminated.
However, the last message displayed is: "Hatch boundary associativity removed".
(defun c:deletehatch ( / d l )(vl-load-com) (setq d (vla-get-activedocument (vlax-get-acad-object))) (vlax-for a (vla-get-layers d)(if (eq :vlax-true (vla-get-lock a))(progn(vla-put-lock a :vlax-false)(setq l (cons a l)) ) ) ) (vlax-for b (vla-get-blocks d)(if (eq :vlax-false (vla-get-isxref b)) (vlax-for o b (if (wcmatch (vla-get-objectname o) "AcDbHatch")(vla-delete o)) ) ) ) (foreach a l (vla-put-lock a :vlax-true)) (vla-regen d acallviewports) (princ (strcat "All HATCH have been removed")) (princ))
How i can take off or remove the message "finding exterior borders". This appear in the left bottom corner of Civil 3D.....it makes that my computer is very slow...
View 1 Replies View RelatedGetting a "remove flag" message when trying to enter a photo caption.
View 1 Replies View RelatedLightroom 4. Can't get error message that a particular file is missing off the screen. I have verified that the file is gone. Now how do I get rid of that message
View 1 Replies View RelatedI am facing problem in my AutoCAD2013 (Ultimate version) -
1.While opening any file an alert message is appearing on the screen, for closing the same I Have to use ( X) close many times.
2 After opening the file every time I have to set the AUTOcad default setting once again, it is taking too much time,
I am not in a position to format my PC now, The snap shot is attached herewith.
Im using PSE 11. How do I remove an image from a green screen and place on a different background?
View 1 Replies View RelatedI am about to do some reconfiguring of my system so I figured I'd find the best way to optimize for Photoshop.
I currently have Windows (and page file), Photoshop (and all other apps) and data on my C: drive (7200 RPM - 80 gigs of free space). My D: drive is a separate physical drive (not a partition) with 45 gigs of free space. I store photos and music here and use it as my Photoshop Scratch disk.
I am buying a new 500 gb USB drive to use as storage (for things like photos and music) and backup. All of the contents of the D: drive will be moving to the new drive thus leaving me with 80 gb of free space on the D: drive.
My questions:
1. Should I continue to run Photoshop on the same drive as my OS?
2. I plan to move my 'data' (files I edit with Photoshop or Illustrator etc.) to my D: drive. Is this OK or should it be on the same drive Photoshop is on?
3. Assuming I move my data to my D: drive... I read that Photoshop berforms best when its Scratch Disk is an empty, unfragmented disk with plenty of room. Since I do not have an empty hard drive to spare, which will yield better performance:
A. Partition my D: drive (which will leave me with D: and E. Use D: for my .PSD and .AI files. Use E: as my Photoshop Scratch Disk
or
B. no partition. Use D: for my .PSD and .AI files as well as for my Potoshop Scratch Disk
My PS is starting to get a little out of control and I hope one of you guys can steer me in the right direction with this.
I do quite a bit of stuff in hi rez (300 dpi) switching back and forth between actual pixel view and fit on screen modes. Recently my "fit on screen" mode wants to keep getting bigger and bigger and no longer snaps back to the correct screen size. Does anyone know how I can fix this?
The other question should be pretty simple. I want to change the default blending options. Things like stroke, inner and outter glow color etc.
I presently have code that will select objects on screen based on particular stored object handles. The code then prompts the user to add additional selections once these handle selections are made. No problem. The problem lies with attempting to deselect the objects that were selected via object handles. I should say highlighted because that is what the present code is doing. It is highlighting the objects on screen. The code I am using follows:
Dim ids(1) As ObjectId ids(0) = ObjectIdFromHandle(myDocDB, "1D6") ids(1) = ObjectIdFromHandle(myDocDB, "1DE") Autodesk.AutoCAD.Internal.Utils.SelectObjects(ids) ' Get the Pickfirst selection
[Code]....
I'm trying to find out if Corel Paintshop X4 Pro has a tool or setting to remove a chromakey green screen background?
View 3 Replies View RelatedRecently migrated from windows to mac os and only using this version on a macbook for now until I feel confident to changeover the studio workstation after many years and trying to find some familiar ways around as I have been used to working on LT2004 (although I have upgraded many times I just never really got on with the newer pallettes etc and revert to the tried and tested version to keep productivity at work)
- Is it possible to config the content pallette so I can rotate blocks at the time of insertion without having to either post rotate them individually from the model space or use the insert command which appears not to be as graphically friendly as the content pallette which looks excellent for compiling good for libraries but the option to at least rotate.
- Is there a quick and easy to changing linetypes on the fly from a flyout menu on the toolsets... is there any other way round this without having to access the pull down from the properties inspector pallette as that method consumes quite a bit of screen space?
How do you get more fonts to add to the font config? I want to make someimages with cool font but don't know where to find them. This is where I found out about fontconfig [URL]...
View 2 Replies View RelatedDWG configuration? I keep trying different configurations but none are acceptable to our quality department.
What I need is for dimensions to retain associativeness(not exploded), and for the dimensions to retain their fit (i.e. look like they do in the idw)
The Pagesetup isn't showing up in the Pagesetup dialog.
But when I close the drawing and open it up it's visible.
What am I missing here? Still new with this transaction concept...
<CommandMethod("aps")> _Public Sub AddPlotSetting() 'TODO: Finish Cleaning Print Function Dim s_PlotSettingsFile As String = "c: est.dwg Dim s_PageSetupName As String = "catdog" Dim s_MediaName As String = "11 x 17"
[Code]....
I want to have an application settings file stored centrally on a network drive. In the past I have used INI files, and for a Windows app would now use an app.exe.config XML file. My question is: what is the preferred technique for storing shared settings centrally for an AutoCAD .dll plug-in? It seems even for a full Windows app that the app.exe.config file can't be located on a network drive, but I could be mistaken. In any case that doesn't appear an option for a .dll plug-in. Everyone comments that INI files "are so 90s", but I can't see an alternative.
View 2 Replies View Relatedhow to change our config and template files from old to new
View 1 Replies View RelatedWe have a big problem on several PC's with Acad Map 3D
if the users import their old (Acad 2010 Map 3D) files where symbollists and view settings are stored.
After a restart of Acad it hangs up with following Errors (See attached).
We can solve this issue temporary with restoring the defaults.
So the problem is importing old files so i think it is not campatible with this old acad 2010 files.
Is there a way to import such old files?
The best way to have normal AutoCAD objects (lines, plines, arcs) adhere to the Display Configurations.
My original idea was to contain all of the 'vanilla linework' in one Multi-View Block per Construct, thereby enabling me to set the Display Properties for that MVB and have the linework show/hide depending on my Display Config. I end up having to 'edit block in-place' if I want to change anything, which seems to work but there has got to be a better way.
My only other idea was to somehow link Layer Filters (which I'm unfamiliar with, and probably using the wrong term) to the Display Configs so that depending on the current Config, certain layers would be frozen/thawed. This seems like the way to do it, but it is not obvious to me how I might be able to achieve this through the Display Manager.
I'm using AE CC and can't render any comp using the Quicktime codec. Any other codec seems fine strangely.Attached/below is the error message that crops up whenever I attempt this.
View 4 Replies View RelatedOur office is currently running Inventor 2012, with SP2 installed (Build 219) and the program still seems unable to fully save and utilize a defualt configuration setting for exporting DXF flat patterns of sheet metal parts. Our laser machine requires AutoCAD 2000 DXF, and while I'm able to save a configuration file (.ini) with this setting, I still have to click on the "Options" button and then click "Finish" or it will save to the standard default AutoCAD 2010 DXF file version and our laser will be unable to read the file.
View 1 Replies View RelatedI have an HP Designjet 800 that is currently loaded with a 36" roll. I'd like to print to ANSI D in a landscape orientation, but D (landscape) isn't an option in the paper size drop down. Printing D in portrait orientation just wastes a bunch of paper space.
How do I change the paper from 22x34 to 34x22? (or vice versa, whichever way I need).
I've had a great time using the Web Photo Galleries in Photoshop CS and CS2, especially since I'm fairly deft with HTML and a total Flash dunce, so the Web Photo Gallery Flash 1 and Flash 2 templates have served me well and allowed me to make fun Flash stuff without having to learn. But, with learn-by-doing, there often comes a point of confusion, and I think I've found mine.
I noticed that (when using the gallery "Flash 1"), if I click the little ? in the bottom right, the file name will come on and stay on throughout all the pictures. This is exactly what I want since that's where I do all my captioning and it really adds something for me to be able to see that. My question: how in the world do I get it to do this by default? I'm always telling friends/family, "oh, click the little ? in the bottom right and it'll show the captions," but am certain there must be some way to do this by default.
I fiddled in the galleryconfig.xml file, but there's only this line
HTML Code:
<var symboltype="boolean" name="showHelpButton" value="true" />
which actually just tells the button to be displayed, but not for the thing that happens as a result of pushing the button to stay displayed.
I'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
I have used "Share My Screen" meeting feature a few times on my machine.
a client and it gave me the blue screen of death crash and forced a restart. After it did this 3 times I gave up.
Windows XP Home 2002 SP3
PhotoshopCS4 Extended
CS4 Production Premium
RADEON X300 SE 128MB Hypermemory
Intel Pentium (R) CPU 3.00 GHz 2.99 Ghz
2.50 GB RAM
Model Space Screen Darkens and am unable to see screen
View 2 Replies View RelatedHow do i stop the screen from moving when I drag something to the edge of the screen?
View 1 Replies View Related