AutoCAD Map 3D :: 2013 X64 Crash After Importing Old Config Files?
Dec 5, 2012
We have a big problem on several PC's with Acad Map 3D
if the users import their old (Acad 2010 Map 3D) files where symbollists and view settings are stored.
After a restart of Acad it hangs up with following Errors (See attached).
We can solve this issue temporary with restoring the defaults.
So the problem is importing old files so i think it is not campatible with this old acad 2010 files.
Is there a way to import such old files?
View 8 Replies
ADVERTISEMENT
Jun 5, 2012
Importing SAT files has an error trying to open multiple files using the Select Additional SAT Files for Import Button.
Work around is to import using 2012, save and open in 2013, but have not fully tested. Have not tried yet using a 2012 max file as an xRef in 2013.
View 1 Replies
View Related
Feb 20, 2008
I have this problem with CS3, both on xp and vista, with the same machine.
I didn't have the problem with CS2.
When I import illustrator files into photoshop, the system crashes. Crashes are more frequent importing higher than 72dpi resolutions.
View 4 Replies
View Related
Jun 8, 2012
The hard drive on which I kept my LR library recently crashed. I need to import my files to LR from my backup HD. Is there a way to do this without creating duplicates and preserving the LR edits?
View 1 Replies
View Related
May 29, 2012
Any time the gateway scans a directory, which has a clip that has stereo audio, Smoke hangs. Is this a bug? Specifically the file was a Canon 7D file which had audio recorded with it. The crash does not happen when we try a file without audio or a file whose audio has been converted to mono. The file was directly from the camera. Same thing happens when it is a Prores HQ file with Stereo audio.
View 9 Replies
View Related
Nov 12, 2012
I have no this problem for version before Inventor 2013, just start from this lates version.
I models a ballet bar assy in 2'6" width with derived sketch, then I used DA to copy all the files with new name in 4'. After that, I tried to open the new files, it crashed itself, no matter I open a part or assemble.
But if I changed the derived sketch name back to its original, everything is fine for new files.
I attahced the zip file, try it. If it crashes, just change file: BALLET BAR 4ft_SKETCH
to: BALLET BAR 2ft-6in_SKETCH
everything is fine then.
View 6 Replies
View Related
Jun 11, 2012
how to change our config and template files from old to new
View 1 Replies
View Related
Jul 23, 2012
We have maya 2012 and autocad 2013. Does direct connect 2011 allow you to import autocad dwg files into maya? If not, has Autodesk updated direct connect as a maya/autocad plug in so we can use dwgs between the two programs? I can't get support to answer this, they keep saying "we monitor the forums, ask there." So, here goes! Autodesk ought to take a lesson from zbrush, who imports/exports with one button now!
View 4 Replies
View Related
Mar 22, 2013
Can I import KMZ files into AutoCAD Civil 3D R.2013, or do I need to purchase an add-on package that will make it work? Does it work with just AutoCAD Map 3D?
If not, how do you import KMZ files into AutoCAd Civil 3D?
View 9 Replies
View Related
Sep 19, 2012
I've been trying to import a Solidworks file (.SLDASM) into AutoCAD 2013. The documentation says this is a valid file type, but it doesn't seem to work The import process completes, but the following message appears: “Import failed. The specified file is invalid or unsupported.”
View 6 Replies
View Related
Dec 5, 2013
Can you import files from autocad windows 7 (using mac w/ bootcamp or parallels) to sketch-up and photoshop on Mac os x 10.8.5? If so, what is the easiest way to do so? Also, would Parallels or Bootcamp be better for going between the operating systems?
View 3 Replies
View Related
May 30, 2012
I have issues when importing Pro Engineer files in Inventor 2013. Importing the same models in Inventor 2012 works fine.
View 9 Replies
View Related
Jul 23, 2012
How can I import an ESRI shape file in 2013? Are the map commands no longer available?
View 3 Replies
View Related
Nov 15, 2013
I have different SLDPRT files I would like to import into AutoCAD Mechanical 2014 (it's a student version).
My colleague is able to import those files, in my case it always fails even though we are having the same files and the same version.
He has Windows 7, I have Windows 8.1.
View 2 Replies
View Related
May 8, 2013
I have recently upgraded to 2013 FDS and now when I try to import Acad files (sometimes up to 2000 solids) it takes virtually a full day to import one file. When I had 2011 I could import these files much faster.
View 1 Replies
View Related
Oct 18, 2012
I recently upgraded to Map 3d 2010 to Mapd 3d 2013 and i cannot figure out how to find the commands to insert images or import/export shp files.
I'm running 2013 in "autocad classic" and did so with 2010 as well. 2010 had a menu bar pull down called "Map" where I could insert an image (Image->Insert). There was also in 2010 a toolbar named "Map" that had import shp, export shp and assign coordinate system.
I can't find any of this in 2013. I can't even find the commands in the customization to create my own toolbar. The commands work (mapiinsert, mapimport, mapexport and ADESETCRDSYS) but i can't find them listed anywhere.
View 2 Replies
View Related
Mar 11, 2013
When I attempt to import a PKT file from SAC, C3D crashes. This includes custom ones that I created as well as samples from the ADESK site.
View 9 Replies
View Related
Aug 12, 2013
The crashing is consistent every time I try this. Here is how I replicate the problem:
- Open a SheetSet.
- Right click on the sheetset and select Transmittal Setups.
- Click import.
- Select a template DST and click open.
- Check a setup and click import checked.
Civil 3D Locks and an error saying "AutoCAD Application has stopped working" pops up and whamo. I have custom eTransmit settings and here they are just in case,
[HKEY_CURRENT_USERSoftwareAutodeskAutoCADR19.0ACAD-B000:409ETransmitsetupsBack-Up]
"AEC_EXPLODE_DWG"=dword:00000000
"Name"="Back-Up"
"AEC_TEMP_SETUP"=dword:00000000
"AEC_INCLUDE_PROJ_INFO"=dword:00000000
[code]....
View 8 Replies
View Related
Jul 20, 2012
We have loaded copies of AutoCAD Architecture 2013 on several workstations. We had tried brining over older profiles (from 2008)- which did not work, so made up new ones. ANYTIME we go into the profile settings to load a different profile beyond the default, AutoCAD Architecture (US Imperial), eventually while working the program will crash. We've wiped out installations of the program, registry and all, and re-installed without brining over any prior data. Same issue.
Even when using a seperate "default" profile us as (Global) or (Metric)- same issues. The problem with staying/modifying the workspace for the US Imperial is it will not load the complete menus with the MENULOAD command (only loads EXPRESS). If we work within the (US Imperial), no crashing, but again, the menus are not available within that profile for some reason, so that is not an acceptable solution.
View 5 Replies
View Related
Aug 29, 2012
Autocad 2013 x64 and DWG TrueView 2013 x64 crash when print on HP LaserJet 5200 (A3)
APPCRASH
acad.exe
25.0.55.0
4f309adb
StackHash_c855
6.1.7601.17725
View 2 Replies
View Related
Dec 26, 2011
I'm having with x3 when I import MOV files from an IPhone 4s onto an HP pavillion dv7 4270us laptop with 4 gb, 1.80ghz.
The playback is very choppy and almost paralyzed, while the audio does fine.Also, x3 constantly shuts down with a brief error message telling me to contact corel support.
Should I be converting these video clips before I import them into my capture folder on corel?
I'm trying to preserve quality since the iphone4s takes a pretty nice video, definitely rivals my canon dv and most HD flip cams I've seen.
View 2 Replies
View Related
Nov 21, 2011
I am facing problems with the use of Photo-Paint within the CorelDraw Graphics Suite X5 on Windows 7 Enterprise x64 SP1 machines.The application crashes when the students try to import a picture twice. The error I am getting is 0xc0000005. I already searched on Google and on this forum, and came across a lot of people with the same problem, and that it's being caused by Avast. Thing is, we do NOT use Avast, we are using NOD32 as anti virus.
View 3 Replies
View Related
Apr 22, 2012
I had yesterday a photoshoot, today I was importing my images from my CF card to my local drive C: with Lightroon 4... Everything was fine, till a moment I get an error of Windows: "you need to format the disk in drive before you can use it."
I rejected my card, insterted in my dslr to check if picture still available, but on my screen I see the same error message 'Format first the card to use it'
50% of my images are not imported and I need them.
View 2 Replies
View Related
Jan 7, 2014
My girlfriend has a problem with AutoCad 2013 students version. After attaching pdf file in underlay option AutoCad crash. She's got macbook air with system version OS 10.9. She had not ever problems with pdr iunderlay before.
View 1 Replies
View Related
Aug 20, 2012
We have just loaded the following the this order, AutoCAD2013, Revit MEP then Navis Simulate. All 2013. Everything works, including the NWC export from Revit MEP and the export from AutoCAD.The problem is that when you submit the NWNAVIGATOR command, Autocad thinks about it and then crashes out of AutoCAD. We have switched off the Hardward drivers.
View 4 Replies
View Related
Jan 10, 2013
I am having a problem with AutoCad 2013 crashing. While running the program when I use the open command dialog box if I re-name a file, create a folder, or copy a file autocad goes unresponsive and crashes immediately afterward. I have installed the service pack and update my video card driver trying to fix the problem. I used to be able to perform everything mentioned above in AutoCad 2010 without any problems. I don't think its my computer causing the problem because everyone else in my office is having the same issue with 2013.
View 5 Replies
View Related
May 22, 2013
I need to re-install my ACAD 2013. I get to the Product License Activation Options and have the activation code when I first installed. This time it dont work. I bet it something to do with multiple install. Error code is: 0015.11.
View 2 Replies
View Related
Jul 6, 2012
AutoCAD MEP 2013. Having a repeated crash when creating a 2D section view. Works great up until I place the 2D section and then crashes. I have tried using sections from Electrical and Arch palletes but same thing. I've used this tool thousands of times on other versions but this is the first time with 2013.
View 2 Replies
View Related
Jul 31, 2012
I am using Windows 7 64 bit laptop. When I close a drawing just after saving in AutoCAD 2013 64 bit, the program crashes. This will happen with one drawing open, or several. I also had this problem with 2011.
I have been using AutoCAD for 16 years and never had this problem with previous versions on earlier operating systems.
View 9 Replies
View Related
Sep 14, 2012
I've been crashing (fatal error, unhandled access violation) a LOT lately, and it happens when I'm changing between tabs - both between layout tabs and from layout to model. I have a brand new computer and a recent install of AutoCAD, which I also ran the repair routine on recently to try to fix the crashing issue. This happened with my old computer as well, and our IT people thought maybe it was too old to handle AC 2013 (old one was about 7 years old), so now I'm running an HP Compaq Elite 8300, Win 7 OS, with an Intel i5-3470 CPU at 3.2 GHz, 8 GB of RAM, and an NVIDIA NVS 300 graphics card. And it still crashes.
I'm using files that were created on my old CAD station, which ran AutoCAD 2008 LT, and it started crashing on me - I suppose it's possible that one or more of those files got corrupted and that's what's causing this.It's crashed three times in the last three days, and probably a total of 10 - 15 times since my new computer came in late last month, and I'm getting pretty tired of it.
View 9 Replies
View Related
Jun 6, 2012
After upgrading/switching my stand alone license from Civil 3D 2011 to Map 3D 2013, my computer is crashing before a complete opening of some larger dwgs (1575 KB). Sometimes I get an Out of Memory message.Other (much smaller) drawings open fine.The switch from Civil to Map was made because we were not using any of the civil bells and whistles that make it unique.
Map suits our needs. We use shp files (data connect) to generate most of our work.I can use another computer in our office that has Map 3D 2011 and am able to open up any of the drawings with no problems. Because I had no issues with Map 3D 2011, I thought moving up to 2013 would be "easy".
We have a subscription and every couple of years try to load up the latest and learn to live with it.Now I am wondering if we can all just go to Map 2011 and forget 2013.
View 6 Replies
View Related
