AutoCAD Inventor :: 2013 Crash When Use DA To Copy Files With New Name
Nov 12, 2012
I have no this problem for version before Inventor 2013, just start from this lates version.
I models a ballet bar assy in 2'6" width with derived sketch, then I used DA to copy all the files with new name in 4'. After that, I tried to open the new files, it crashed itself, no matter I open a part or assemble.
But if I changed the derived sketch name back to its original, everything is fine for new files.
I attahced the zip file, try it. If it crashes, just change file: BALLET BAR 4ft_SKETCH
to: BALLET BAR 2ft-6in_SKETCH
everything is fine then.
View 6 Replies
ADVERTISEMENT
Dec 5, 2012
We have a big problem on several PC's with Acad Map 3D
if the users import their old (Acad 2010 Map 3D) files where symbollists and view settings are stored.
After a restart of Acad it hangs up with following Errors (See attached).
We can solve this issue temporary with restoring the defaults.
So the problem is importing old files so i think it is not campatible with this old acad 2010 files.
Is there a way to import such old files?
View 8 Replies
View Related
Jun 5, 2012
Importing SAT files has an error trying to open multiple files using the Select Additional SAT Files for Import Button.
Work around is to import using 2012, save and open in 2013, but have not fully tested. Have not tried yet using a 2012 max file as an xRef in 2013.
View 1 Replies
View Related
Oct 12, 2012
We just upgraded to 2013 software and anytime i change the ribbon to anything besides the default Inventor crashes.
View 9 Replies
View Related
May 15, 2013
I'm having an issue with Inventor crashing every time I attempt to follow this exact procedure:
1. I have a drawing open with an iAssembly or iPart in it.
2. I edit a view by double-clicking the view, opening the 'Drawing View' dialog box.
3. I open the 'Model State' tab.
4. In the 'iAssembly/iPart Member' menu box, I select a different member.
Now, it may or may not open the 'Save' dialog box. If it does, then I click 'OK' and poof, Inventor crashes without fail, asking to send in a crash report.
The same thing happens if I start a brand new drawing and attempt to follow the same procedure while inserting a Base view.
Now, I know for a fact that the not all of the drivers are not up to date on my computer, I am not using a recommended graphics card, and I am using SP1.1, not SP2. I have notified my IT guy about this, but he has yet to get back to me. I don't now if/when everything on my computer will be updated. I do not have admin rights to my computer.
In the mean time, Inventor has become essentially useless for me until this issue has been resolved. how I can get these drawings to start working?
View 3 Replies
View Related
May 28, 2013
I have a mech/mfg-necessary pattern set on several parts, to the tune of about 90 slots and 500 holes each. Inventor is absolutely sucking it up handling these parts, and the assembly of these parts together is just a complete nightmare.
I have half-hour load times, constant crashes, and to top it off, they're iparts (used in an iassembly), which means I am constantly having to regenerate the whole part family with every change, a process that can take literally hours.
Are there substitute tricks, or display setting shenanigans I can pull? All of the features are individually needed somewhere, but no mgf machine needs all of them present at once.
View 9 Replies
View Related
May 18, 2013
In some of my DWG files I can’t able to copy paste the elements from one file to another . For example, I can’t able to copy the level marks from one file to another. Both files are located in same coordinate.
View 6 Replies
View Related
Jul 20, 2012
We have loaded copies of AutoCAD Architecture 2013 on several workstations. We had tried brining over older profiles (from 2008)- which did not work, so made up new ones. ANYTIME we go into the profile settings to load a different profile beyond the default, AutoCAD Architecture (US Imperial), eventually while working the program will crash. We've wiped out installations of the program, registry and all, and re-installed without brining over any prior data. Same issue.
Even when using a seperate "default" profile us as (Global) or (Metric)- same issues. The problem with staying/modifying the workspace for the US Imperial is it will not load the complete menus with the MENULOAD command (only loads EXPRESS). If we work within the (US Imperial), no crashing, but again, the menus are not available within that profile for some reason, so that is not an acceptable solution.
View 5 Replies
View Related
May 1, 2012
i'm trying to do is copy some linework in a sketch i have on autocad 2011 (i havent upgraded it yet) and paste it into a sketch i have on inventor 2013.
Copy and paste works fine with other versions of inventor or autocad, but i can't use 2013 inventor for pasting.
When i attempt to paste the linework into my 2013 inventor sketch i recieve a long hefty error message:
"String resource could not be loaded (and is missing?) for id 5239 (error 2fee34a0)"
View 5 Replies
View Related
Jan 22, 2013
I have 2013 inventor/mechinical a cad did not have enought memory on c: drive added another hard drive E: need to move my files to the e drive. single seat all on this computer.
View 4 Replies
View Related
Aug 29, 2012
Autocad 2013 x64 and DWG TrueView 2013 x64 crash when print on HP LaserJet 5200 (A3)
APPCRASH
acad.exe
25.0.55.0
4f309adb
StackHash_c855
6.1.7601.17725
View 2 Replies
View Related
Oct 9, 2013
When using save copy as to make an identical part with a different number, the file name in the top and the browser doesn't update to the new filenumber. only in the bottom file tabs is the name correct. if I go to file> save as I can also see the new filename. This is a hassle when doing this to multiple files in an assembly, as it makes it hard to keep track of which parts have been given a new name. It seems the filename input in the browser is only written once, and that is when the first file was saved for the first time.
View 7 Replies
View Related
Sep 10, 2012
I did a sketch in an idw that is not attached to any view. I wan't to copy it somehow to another idw. But when I right click, copy and/or paste are not available for me to complete to process.
I tried creating a symbol using my already made sketch since those are easier to copy/paste between files. But I don't know how to proceed without recreating my sketch.
View 9 Replies
View Related
Jan 3, 2013
I'm using AutoCAD 2013 that came with Building Design Suite (Revit) and the copy command terminates after making the first copy, instead of continuing to make multiple copies until I terminate the command. Is there a switch to control this? A sysvar?
View 2 Replies
View Related
Feb 14, 2012
I have the need filter inside Vault the Inventor Drawings (.dwg/.idw) by its papersize.
In my testing enviroment, I created a iLogic rule inside a .idw with the following
iProperties.Value("Custom", "Formato") = ActiveSheet.Size
I used the Ruler Trigger "After Save Document" to refresh this rule.
In Vault, I've mapped this custom property:
But, how to Copy (and update) this iLogic Rule to the other existing .dwg files in Vault?
I thought the iLogic Design Copy would be able to do so, but it doesn't works in that way.
View 6 Replies
View Related
Apr 22, 2013
Have a problem of users using files in their local workspace instead of getting the latest files from Vault?
This is an Inventor question because my next step will be to develop an Inventor addin which deletes files from a user's local workspace when they check the files in.
Win7 x64 - 16gb ram
i7 3610qm
FirePro M4000
Inventor 2013
ETO 6.1
View 9 Replies
View Related
Feb 27, 2012
I was able to use Inventor "Save Copy As" function to create zgl files. When the zgl files were viewed with "Imagination View" program, some files looked good, while some others do not show any geometry (just white background). Do I need to change anything in the Model before executing "Save Copy As" function?
View 3 Replies
View Related
Apr 21, 2013
I have a 3D file (not of my creation) that gives me some problems when I try to copy it (it is a 3D building).
The problem is that, when i click on "copy" command, I can select a point but then AutoCAD crashes and it takes about 30 seconds to return working a normal way and permit me to paste it. (it happens with "move" command too)
Otherwise, if I use "copy with base point" I have no problems: after a second I can paste it where I want.
How can it be possible? Cause if sometimes I mistake and digit "copy", I always have to wait the long Autocad response.
This problem happens with both autocad 2012 and 2013 and it doesn't happen with other 3D files I have. The drawing is made mainly of meshes.
I have a Dell notebook and a NVIDIA Quadro 2000M video card, so you can understand I don't like this problems: I spent a lot of money for something I hoped could work well with AutoCAD.
About that, aren't there drivers for the graphic card? Cause when I click on "check for updates", autocad says me that there are newer version of the driver, but then it says me that it is impossible to update it (I have a connession and a student version).
View 4 Replies
View Related
Mar 5, 2013
I have a folder that contains subfolders, then more subfolders. All these folders contain Inventor files. There are few different models there with drawings and related files...
I need to make an exact copy of the folder at different location in Vault. To use Copy Design tool, I would need to do it few times, as there are few totally separate files in the folders.
Now, is there a way of taking main folder with its all contants and just copying/renaming it to other location? It would save me lot of time.
View 2 Replies
View Related
Jul 24, 2013
I'm trying to Copy an Assembly via the Apprentice Server functionality.
But I don't want to copy all files with the filesave as feature. Some of the files, has to be used again as the source file. For Example Content Center files should not be copied. Or maybe also some specific defined internal standard files.
Is there a possibility to get this work?
In the moment, I got all these files via:
[...] For each Element As Inventor.ApprenticeServerDocument In doc.AllReferencedDocuments [...]
maybe it's possible to say something like that:
If Element=ContentCenterDocument then BlaBlaBla
I know, there's an "Inventor.ObjectTypeEnum.kContentCenterObject", but I don't know, how to use it, to check the ApprenticeServerDocument with that.-
View 2 Replies
View Related
Jan 11, 2013
i have various files which I cannot copy elements of into other drawings.
when i use the ctrol+copy command, I get the "copy to clipboard failed". This has only started since I upgraded to AutoCAD2012.
View 4 Replies
View Related
Jan 7, 2014
My girlfriend has a problem with AutoCad 2013 students version. After attaching pdf file in underlay option AutoCad crash. She's got macbook air with system version OS 10.9. She had not ever problems with pdr iunderlay before.
View 1 Replies
View Related
Aug 20, 2012
We have just loaded the following the this order, AutoCAD2013, Revit MEP then Navis Simulate. All 2013. Everything works, including the NWC export from Revit MEP and the export from AutoCAD.The problem is that when you submit the NWNAVIGATOR command, Autocad thinks about it and then crashes out of AutoCAD. We have switched off the Hardward drivers.
View 4 Replies
View Related
Jan 10, 2013
I am having a problem with AutoCad 2013 crashing. While running the program when I use the open command dialog box if I re-name a file, create a folder, or copy a file autocad goes unresponsive and crashes immediately afterward. I have installed the service pack and update my video card driver trying to fix the problem. I used to be able to perform everything mentioned above in AutoCad 2010 without any problems. I don't think its my computer causing the problem because everyone else in my office is having the same issue with 2013.
View 5 Replies
View Related
May 22, 2013
I need to re-install my ACAD 2013. I get to the Product License Activation Options and have the activation code when I first installed. This time it dont work. I bet it something to do with multiple install. Error code is: 0015.11.
View 2 Replies
View Related
Jul 6, 2012
AutoCAD MEP 2013. Having a repeated crash when creating a 2D section view. Works great up until I place the 2D section and then crashes. I have tried using sections from Electrical and Arch palletes but same thing. I've used this tool thousands of times on other versions but this is the first time with 2013.
View 2 Replies
View Related
Jul 31, 2012
I am using Windows 7 64 bit laptop. When I close a drawing just after saving in AutoCAD 2013 64 bit, the program crashes. This will happen with one drawing open, or several. I also had this problem with 2011.
I have been using AutoCAD for 16 years and never had this problem with previous versions on earlier operating systems.
View 9 Replies
View Related
Sep 14, 2012
I've been crashing (fatal error, unhandled access violation) a LOT lately, and it happens when I'm changing between tabs - both between layout tabs and from layout to model. I have a brand new computer and a recent install of AutoCAD, which I also ran the repair routine on recently to try to fix the crashing issue. This happened with my old computer as well, and our IT people thought maybe it was too old to handle AC 2013 (old one was about 7 years old), so now I'm running an HP Compaq Elite 8300, Win 7 OS, with an Intel i5-3470 CPU at 3.2 GHz, 8 GB of RAM, and an NVIDIA NVS 300 graphics card. And it still crashes.
I'm using files that were created on my old CAD station, which ran AutoCAD 2008 LT, and it started crashing on me - I suppose it's possible that one or more of those files got corrupted and that's what's causing this.It's crashed three times in the last three days, and probably a total of 10 - 15 times since my new computer came in late last month, and I'm getting pretty tired of it.
View 9 Replies
View Related
Jun 6, 2012
After upgrading/switching my stand alone license from Civil 3D 2011 to Map 3D 2013, my computer is crashing before a complete opening of some larger dwgs (1575 KB). Sometimes I get an Out of Memory message.Other (much smaller) drawings open fine.The switch from Civil to Map was made because we were not using any of the civil bells and whistles that make it unique.
Map suits our needs. We use shp files (data connect) to generate most of our work.I can use another computer in our office that has Map 3D 2011 and am able to open up any of the drawings with no problems. Because I had no issues with Map 3D 2011, I thought moving up to 2013 would be "easy".
We have a subscription and every couple of years try to load up the latest and learn to live with it.Now I am wondering if we can all just go to Map 2011 and forget 2013.
View 6 Replies
View Related
Dec 20, 2013
Happens every year. Upgrade and spend half a day or more trying to get everything back to the way I had it. All I have is a couple small toolbars for commands that are several clicks deep in the ribbons and I want them "right there" all the time.
I thought Autodesk 360 might be a good tool for this. All it did was DOWNLOAD some old settings and destroy one of the toolbars I'd created. They really need an override in there to specify upload, download, overwrite or don't.
I'm trying to migrate (I guess that's the technical term) my settings from 2013 Mechanical to 2014 Mechanical. It's probably too late already, after 360 did its deal, but I really want to get this down so we don't go through it every year anymore.
I maintain that PTC had this part of it down Pro/ENGINEER. You had a config file that was editable plain text.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
View 9 Replies
View Related
May 17, 2013
The big problem is that when am doing whatever work, the program stop working and show a error message, that says: ERROR FATAL: Unhandled access violation writing 0x000 exception at 70601612h
[URL]
And it happens when i'm on any kind of views or after printing..
My Pc is an: Intel Core i3-2100 CPU @ 3.10GHz
4gb Ram
Windows 7 ultimate x64 bits
I DON'T HAVE AN VIDEO CARD. I use the one that provide the Motherboard.. Thats Intel HD Graphic 2000
View 1 Replies
View Related
