Importing SAT files has an error trying to open multiple files using the Select Additional SAT Files for Import Button.
Work around is to import using 2012, save and open in 2013, but have not fully tested. Have not tried yet using a 2012 max file as an xRef in 2013.
We have a big problem on several PC's with Acad Map 3D
if the users import their old (Acad 2010 Map 3D) files where symbollists and view settings are stored.
After a restart of Acad it hangs up with following Errors (See attached).
We can solve this issue temporary with restoring the defaults.
So the problem is importing old files so i think it is not campatible with this old acad 2010 files.
Is there a way to import such old files?
I have this problem with CS3, both on xp and vista, with the same machine.
I didn't have the problem with CS2.
When I import illustrator files into photoshop, the system crashes. Crashes are more frequent importing higher than 72dpi resolutions.
The hard drive on which I kept my LR library recently crashed. I need to import my files to LR from my backup HD. Is there a way to do this without creating duplicates and preserving the LR edits?
View 1 Replies View RelatedAny time the gateway scans a directory, which has a clip that has stereo audio, Smoke hangs. Is this a bug? Specifically the file was a Canon 7D file which had audio recorded with it. The crash does not happen when we try a file without audio or a file whose audio has been converted to mono. The file was directly from the camera. Same thing happens when it is a Prores HQ file with Stereo audio.
View 9 Replies View RelatedI have no this problem for version before Inventor 2013, just start from this lates version.
I models a ballet bar assy in 2'6" width with derived sketch, then I used DA to copy all the files with new name in 4'. After that, I tried to open the new files, it crashed itself, no matter I open a part or assemble.
But if I changed the derived sketch name back to its original, everything is fine for new files.
I attahced the zip file, try it. If it crashes, just change file: BALLET BAR 4ft_SKETCH
to: BALLET BAR 2ft-6in_SKETCH
everything is fine then.
I want to import 10 photographs - jpg files and insert it into 10 separate/individual pages of documents automatically. Can I do this with import.
View 7 Replies View RelatedI have to import multiple files from Solidworks. I don't have any issues with that except that when I import these files they are base files. All the intelligence is wiped out. I know that Solidworks can import Inventor files and keep all of the intelligence in the file. Does Autodesk have translator software that will allow the import of a solidworks file and keep the intelligence used to build the model?
View 3 Replies View RelatedI am working on a project where I need to bring in multiple building site files from Revit as .adsk files to one Civil 3D model. The first building always imports just fine. For any building after the first, I get the following message:
"The selected file contains a definition of a building site that is already in use."
"What would you like to do?"
"Update the definition of the existing building site (cancel the import and use the selected file to update the definition of the existing building site.)" - THIS OPTION REPLACES THE FIRST BUILDING WITH THE NEW BUILDING I HAVE SELECTED
"Browse to another file (display the file browse dialog to select a different file.)"
My team and I have tried every we can think of including the following (see attached):
Renaming the files Moving the files to different folders Importing each building site into a new file and copy and pasting into the model (this works until someone tries to import a building site, which will inevitably happen and ruin this work around)Double-checking all related settings.
We have maya 2012 and autocad 2013. Does direct connect 2011 allow you to import autocad dwg files into maya? If not, has Autodesk updated direct connect as a maya/autocad plug in so we can use dwgs between the two programs? I can't get support to answer this, they keep saying "we monitor the forums, ask there." So, here goes! Autodesk ought to take a lesson from zbrush, who imports/exports with one button now!
View 4 Replies View RelatedCan I import KMZ files into AutoCAD Civil 3D R.2013, or do I need to purchase an add-on package that will make it work? Does it work with just AutoCAD Map 3D?
If not, how do you import KMZ files into AutoCAd Civil 3D?
I've been trying to import a Solidworks file (.SLDASM) into AutoCAD 2013. The documentation says this is a valid file type, but it doesn't seem to work The import process completes, but the following message appears: “Import failed. The specified file is invalid or unsupported.”
View 6 Replies View RelatedCan you import files from autocad windows 7 (using mac w/ bootcamp or parallels) to sketch-up and photoshop on Mac os x 10.8.5? If so, what is the easiest way to do so? Also, would Parallels or Bootcamp be better for going between the operating systems?
View 3 Replies View RelatedI have issues when importing Pro Engineer files in Inventor 2013. Importing the same models in Inventor 2012 works fine.
View 9 Replies View RelatedHow can I import an ESRI shape file in 2013? Are the map commands no longer available?
View 3 Replies View RelatedI have different SLDPRT files I would like to import into AutoCAD Mechanical 2014 (it's a student version).
My colleague is able to import those files, in my case it always fails even though we are having the same files and the same version.
He has Windows 7, I have Windows 8.1.
I have recently upgraded to 2013 FDS and now when I try to import Acad files (sometimes up to 2000 solids) it takes virtually a full day to import one file. When I had 2011 I could import these files much faster.
View 1 Replies View RelatedI recently upgraded to Map 3d 2010 to Mapd 3d 2013 and i cannot figure out how to find the commands to insert images or import/export shp files.
I'm running 2013 in "autocad classic" and did so with 2010 as well. 2010 had a menu bar pull down called "Map" where I could insert an image (Image->Insert). There was also in 2010 a toolbar named "Map" that had import shp, export shp and assign coordinate system.
I can't find any of this in 2013. I can't even find the commands in the customization to create my own toolbar. The commands work (mapiinsert, mapimport, mapexport and ADESETCRDSYS) but i can't find them listed anywhere.
I'm having with x3 when I import MOV files from an IPhone 4s onto an HP pavillion dv7 4270us laptop with 4 gb, 1.80ghz.
The playback is very choppy and almost paralyzed, while the audio does fine.Also, x3 constantly shuts down with a brief error message telling me to contact corel support.
Should I be converting these video clips before I import them into my capture folder on corel?
I'm trying to preserve quality since the iphone4s takes a pretty nice video, definitely rivals my canon dv and most HD flip cams I've seen.
When I attempt to import a PKT file from SAC, C3D crashes. This includes custom ones that I created as well as samples from the ADESK site.
View 9 Replies View RelatedCurrently. I use datafield to link room names at different scales (1:100, 1:50,...). Do we have the method to link these from multiple drawings?
View 1 Replies View RelatedI am facing problems with the use of Photo-Paint within the CorelDraw Graphics Suite X5 on Windows 7 Enterprise x64 SP1 machines.The application crashes when the students try to import a picture twice. The error I am getting is 0xc0000005. I already searched on Google and on this forum, and came across a lot of people with the same problem, and that it's being caused by Avast. Thing is, we do NOT use Avast, we are using NOD32 as anti virus.
View 3 Replies View RelatedThe crashing is consistent every time I try this. Here is how I replicate the problem:
- Open a SheetSet.
- Right click on the sheetset and select Transmittal Setups.
- Click import.
- Select a template DST and click open.
- Check a setup and click import checked.
Civil 3D Locks and an error saying "AutoCAD Application has stopped working" pops up and whamo. I have custom eTransmit settings and here they are just in case,
[HKEY_CURRENT_USERSoftwareAutodeskAutoCADR19.0ACAD-B000:409ETransmitsetupsBack-Up]
"AEC_EXPLODE_DWG"=dword:00000000
"Name"="Back-Up"
"AEC_TEMP_SETUP"=dword:00000000
"AEC_INCLUDE_PROJ_INFO"=dword:00000000
[code]....
I had yesterday a photoshoot, today I was importing my images from my CF card to my local drive C: with Lightroon 4... Everything was fine, till a moment I get an error of Windows: "you need to format the disk in drive before you can use it."
I rejected my card, insterted in my dslr to check if picture still available, but on my screen I see the same error message 'Format first the card to use it'
50% of my images are not imported and I need them.
We have loaded copies of AutoCAD Architecture 2013 on several workstations. We had tried brining over older profiles (from 2008)- which did not work, so made up new ones. ANYTIME we go into the profile settings to load a different profile beyond the default, AutoCAD Architecture (US Imperial), eventually while working the program will crash. We've wiped out installations of the program, registry and all, and re-installed without brining over any prior data. Same issue.
Even when using a seperate "default" profile us as (Global) or (Metric)- same issues. The problem with staying/modifying the workspace for the US Imperial is it will not load the complete menus with the MENULOAD command (only loads EXPRESS). If we work within the (US Imperial), no crashing, but again, the menus are not available within that profile for some reason, so that is not an acceptable solution.
Autocad 2013 x64 and DWG TrueView 2013 x64 crash when print on HP LaserJet 5200 (A3)
APPCRASH
acad.exe
25.0.55.0
4f309adb
StackHash_c855
6.1.7601.17725
The issue probably has to do with the differences in settings. I am using the 64 bit version of Windows 7.I imported a group of pictures with the XMP sidecar files generated with Lightroom v3. All the image files, a mixture of Canon Mark 5D II RAW and jpg files from my point & shoot UFO camera, imported without issue picking up all my tagging and GPS settings. When importing you are put into the Library module and from the Library module I could click on any RAW or jpg file, look at the meta data and view full screen.
I then entered the Develop module with a jpg picture selected and none of my settings made it across. The process was set to 2012. I was able to try out the new adjustments and all worked very well.I then selected a RAW file while still in the Develop module and all hell broke loose.
I got a tip window pop up, the film strip went orange, the rest of the app screen then became greyed out and then behind tip pop up a crash window containing this information appeared:
Problem signature:
Problem Event Name: APPCRASH
Application Name: lightroom.exe
Application Version: 4.0.0.1
Application Timestamp: 4ef2621d
Fault Module Name: MSVCR100.dll
Fault Module Version: 10.0.40219.1
Fault Module Timestamp: 4d5f034a
Exception Code: c000041d
Exception Offset: 000000000003c1be
[code]....
There was no other path but to have the app close after that. Now since Lightroom has left off with the RAW file in the develop module when I restart the app it starts in the develop module with that same RAW image selected and I crash before I can change to a jpg. I am probably going to have to delete and recreated the data file to use the app again
After the all this I went back and checked to see how I had the catalog settings in LR 3 set because there were no sidecar files for the jpg images. I did not have the option to write settings to jpg and tif files but did have write settings to sidecar set. So I have a bit of a mystery why I have no sidecar files for jpg files when I should have based on the way the settings were. This probably explains why I had no issues at all with them in LR 4.
I am going to get LR 4 working again and then import the same batch of pictures without any sidecar files and see if I have any issues. I will report back soon.
I have three monitors connected to two separate graphics cards, an 8800GT and an FX5200 (PCI). Now, this setup works fine in regular XP Pro, with driver 175.19; Photoshop CS4's OpenGL works without a problem save for the brush cursor bug. However, I installed Vista x64 as a dual boot for the RAM boost, and ran into a bit of a wall.
Photoshop now refuses to work at all with the OpenGL enhancements on. It loads (an improvement in itself, used to get stuck at "Reading preferences"), but it'll freeze when I try to open a file or go to the performance settings. I'm currently using driver 171.16; I know it's outdated, but it's the most recent one that works with both cards in Vista x64. I'm also quite sure it's not the problem; Photoshop works perfectly with OpenGL on if I disable the FX5200.
I've tried the registry key AllowOldGPUs_ON to no effect. I've also tried both the 64-bit and 32-bit versions, with no difference. Is it possible to get Photoshop working with both cards, short of replacing the FX5200?
Specs:
Intel Core 2 Quad Q9300 2.50GHz
4GB RAM
Over 300GB HDD space available for scratch disk use
EVGA 8800GT
PNY Verto FX5200
If i try to select more than a row or the entire column indesign crash and quit. exported to cs6 and opened it works perfectly. URL....
View 25 Replies View RelatedEvery time I try to create multiple section views in Civil 3D 2014 the system hangs and never generates the views. It looks as if it's processing but it never stops and never generates.
View 4 Replies View RelatedMy working company currently practicing multiple user per pc. The autocad can run smoothly during the 1st time windows user account setup. But later on, after few days it start crash. The app will load and run but just for doing simple thing such draw lines, polilines n such. When i want to access the task panel, it crashed. Same if wan to load application, lisp etc. It only work fine under the user account which it is installed in. My user account have the administrative privilege and i'm running Windows XP platform (x32).
View 1 Replies View Related