The hard drive on which I kept my LR library recently crashed. I need to import my files to LR from my backup HD. Is there a way to do this without creating duplicates and preserving the LR edits?
View 1 RepliesI have this problem with CS3, both on xp and vista, with the same machine.
I didn't have the problem with CS2.
When I import illustrator files into photoshop, the system crashes. Crashes are more frequent importing higher than 72dpi resolutions.
Importing SAT files has an error trying to open multiple files using the Select Additional SAT Files for Import Button.
Work around is to import using 2012, save and open in 2013, but have not fully tested. Have not tried yet using a 2012 max file as an xRef in 2013.
Any time the gateway scans a directory, which has a clip that has stereo audio, Smoke hangs. Is this a bug? Specifically the file was a Canon 7D file which had audio recorded with it. The crash does not happen when we try a file without audio or a file whose audio has been converted to mono. The file was directly from the camera. Same thing happens when it is a Prores HQ file with Stereo audio.
View 9 Replies View RelatedWe have a big problem on several PC's with Acad Map 3D
if the users import their old (Acad 2010 Map 3D) files where symbollists and view settings are stored.
After a restart of Acad it hangs up with following Errors (See attached).
We can solve this issue temporary with restoring the defaults.
So the problem is importing old files so i think it is not campatible with this old acad 2010 files.
Is there a way to import such old files?
I had yesterday a photoshoot, today I was importing my images from my CF card to my local drive C: with Lightroon 4... Everything was fine, till a moment I get an error of Windows: "you need to format the disk in drive before you can use it."
I rejected my card, insterted in my dslr to check if picture still available, but on my screen I see the same error message 'Format first the card to use it'
50% of my images are not imported and I need them.
Is my image backup plan fundamentally flawed? My lightroom catalogue refers almost exclusively to RAW files, but for each file, once I've done the required edits, I "export as DNG" to make a backup which has the edits embeded in. I prefer to use RAW files as the main file but I save the backup as DNG just to save a bit of space)
However, if I replace a folder of RAW files myphoto1.CR2, myphoto2.CR2 with a folder of DNG the equivalents myphoto1.dng, myphoto2.dng then not surprisingly Lightroom shows the files are missing. (At this point all I'm doing is simulating a backup recovery). I can "find missing folder" easily enough and the ? disappears from the folder list, but the individual images in the library are still missing. Again this is not really surprising because although the file names are the same as those referenced in the library the extension is DNG rather than RAW.
Now the surprising part (for me anyway).....I can "find missing file" by pointing to the replacement DNG and it warns me that the file name is not the same (because the extension is different) and asks if I want to link them anyway. I say yes and once again the image file is linked to the image reference in the library. So far so good, BUT, despite ticking the box which is meant to link neighbouring files, only the one image is linked.
Clearly if I do face disaster and need to use my backup DNGs then I can't go individually linking each and every image. Is there a quicker way, or is my backup plan fundamentally flawed?
I uninstalled Lightroom, because it was too slow on my computer. It put a lot of library files and directories in My pictures folder.
When I use a backup program (SyncbackSE) to backup my pictures, it starts to scan all the Lightroom library files and it takes forever (hours and counting). Even though Windows cannot find the directories (with hidden and system files shown). I want to completely delete the Lightroom directories, because now I can't backup my images anymore. It is a pain in the dark places.
How to transfer my backup files into lightroom ?
View 4 Replies View RelatedThe issue probably has to do with the differences in settings. I am using the 64 bit version of Windows 7.I imported a group of pictures with the XMP sidecar files generated with Lightroom v3. All the image files, a mixture of Canon Mark 5D II RAW and jpg files from my point & shoot UFO camera, imported without issue picking up all my tagging and GPS settings. When importing you are put into the Library module and from the Library module I could click on any RAW or jpg file, look at the meta data and view full screen.
I then entered the Develop module with a jpg picture selected and none of my settings made it across. The process was set to 2012. I was able to try out the new adjustments and all worked very well.I then selected a RAW file while still in the Develop module and all hell broke loose.
I got a tip window pop up, the film strip went orange, the rest of the app screen then became greyed out and then behind tip pop up a crash window containing this information appeared:
Problem signature:
Problem Event Name: APPCRASH
Application Name: lightroom.exe
Application Version: 4.0.0.1
Application Timestamp: 4ef2621d
Fault Module Name: MSVCR100.dll
Fault Module Version: 10.0.40219.1
Fault Module Timestamp: 4d5f034a
Exception Code: c000041d
Exception Offset: 000000000003c1be
[code]....
There was no other path but to have the app close after that. Now since Lightroom has left off with the RAW file in the develop module when I restart the app it starts in the develop module with that same RAW image selected and I crash before I can change to a jpg. I am probably going to have to delete and recreated the data file to use the app again
After the all this I went back and checked to see how I had the catalog settings in LR 3 set because there were no sidecar files for the jpg images. I did not have the option to write settings to jpg and tif files but did have write settings to sidecar set. So I have a bit of a mystery why I have no sidecar files for jpg files when I should have based on the way the settings were. This probably explains why I had no issues at all with them in LR 4.
I am going to get LR 4 working again and then import the same batch of pictures without any sidecar files and see if I have any issues. I will report back soon.
Since updating to LR4.2 and moving files around my backup files have grown too much, like 40GB over the last week. If I should uninstalled LR4.2 then re-installed, how do I locate those backup files (perhaps hidden!) before re-installing ?
View 3 Replies View RelatedI have lost my primary copies of all my photos due to a hard drive crash. The only copies I have now are in the folder structure created upon import backup (photos imported on...). My catalog is stored on a third drive, and is uneffected with the exception of all the photos being missing.
How can I match up my catalog with the files that are now not in the folder structure of the origionals? I have 65,000 photos in the cagalog, and locating each folder is daunting.
I have few terabytes of photo's that are cataloged in lightroom. Only a few hundred gig are photo's that I rated 3-5 stars and are the only ones that I would want to be 100% certain I don't loose in a perfect storm data loss scenario.
I currently use windows 7 import everything into one master folder for my catalog, then sort and rate them all. Is there any way to direct lightroom to separate all photo's with a 3-5 star rating on my actual hard drive into a separate folder or duplicate them into another folder for cloud back-up? I've tried showing the rating column in window, but it doesn't seem to bring my lightroom star ratings into windows.
After importing into LR3, I get an error message that says: Some import operations were not performed. The following files could not be copied to the backup location.
Then there is a list of images (usually all of the photos imported). This didn't always happen and I can't pinpoint exactly when it started. My LR catalog and backups are stored on an EHD.
I am currently saving all of my metadata to files (just to be sure) and backing up my catalog so I can upgrade to LR5 (already purchased) but want to be sure my catalog is good before I do that.I've tried everything I know - checking my backup location and drive in LR window match up.
hiya! so my master media library is running off a 1 tb outboard drive to lightroom and i have a 2 tb outboard drive as a master backup, i drag new media over to the drive through finder on a mac- will this be able to connect to lightroom's catalog in case of the primary drives eventual failure? is there a better way?
View 4 Replies View Related I'm having with x3 when I import MOV files from an IPhone 4s onto an HP pavillion dv7 4270us laptop with 4 gb, 1.80ghz.
The playback is very choppy and almost paralyzed, while the audio does fine.Also, x3 constantly shuts down with a brief error message telling me to contact corel support.
Should I be converting these video clips before I import them into my capture folder on corel?
I'm trying to preserve quality since the iphone4s takes a pretty nice video, definitely rivals my canon dv and most HD flip cams I've seen.
I have a Canon Rebel XS 1000D that I have been recently shooting RAW images with. However, when I go to import the .cr2 files into LR, it says that it does not recognize the format.
View 6 Replies View RelatedI am shooting raw (D800), importing with import settings set as none or zeroed and when they open in LR the image is clearly processed (as if it was auto toned or something) where is the flat raw image i deserve?
View 3 Replies View RelatedI upgraded to LR3.6 today for LR3. Now Lightroom cannot read any files I try to import. I tried re-installing. Would it be safe to overwrite 3.6 with 3.0?
View 7 Replies View RelatedI started editing a session on my laptop using LR3. I now want to move them to my desktop and edit them on LR4. (I know I need to make them the same version, but alas...) When I try to import them, they are greyed out and no allowing me to import. I saved them as dng files on a flash drive to move them over.
View 2 Replies View RelatedI have setup multiple folders for each year under Pictures in Windows 7. Have recently had to restore Lightroom and upgrade to ver 4.0.Problem is when try to import new photo, the photos go to subfolder I specify, but the tag/label in Lightroom goes some other place under pictures not the sub folder.
View 17 Replies View RelatedI am using Lightroom 5.2 on a Mac with Fusion Drive and always have issues importing DNG files into Lightroom. Any potential causes for this? I see the white bar showing it is importing but it never finishes and I end up having to close lightroom and try again. The images are stored on my desktop.
View 2 Replies View Related"preview Unavailable"did some more shooting today and same thing.when I downlaoded yesterday the images were not there, so I did a fresh import & it tells me there are no new images for import as I have 'don't import suspected duplicates ticked. I unticked this option and selectively imported the missing files - they came up but next to a duplicate thumbnail had that ?
View 5 Replies View Relatedsuccessfully scanning photos into My Pictures. have been able to import first batch into LR3 but having a problem with the last half. i get the following message on the problem files " preview unavailable for this file". when i double click the file i get the following message "could not read preview".
using a nikon coolscan V ed negative scanner and vuescan software. no difference in naming of files between imported ones and unimported ones. again, all files successfully scanned into My Pictures.
I've got a boatload of PSD files in Aperture with keywords and other metadata. I want to import these into LR5.
Aperture will not (AFAIK) write the metadata I have in Aperture to the files themselves since they are PSDs. But it does write to XMP files, so I exported a test batch, PSD + sidecar of same name to a folder. I go to import that folder into LR5 and it works, except no metadata.
I checked the metadata in the sidecars with a text editor; it's there.
I tried the Metadata>Read Metadata from File menu; nothing.
I have just upgraded to LR 4 RC2 and found that it took two hours!! to import NEF files from my Lexar 400X 8Gb CF UDMA card....I did several trials and it seems that the problem appears when I set some keywords before starting the import procedure. When I put no keywords at all, Import runs as fast as with the previous version of LR4..
View 2 Replies View RelatedWhen LR3 is installed, it will not import my CR2 files. tried an un-install and still no results. when i install LR3.5 on laptop (without Lion) everything works fine. what is going on?
View 1 Replies View RelatedAfter installation of LR4 Beta,Thumnails of Video files(AVCHD) were not generated. After restarting the system, I could view thumbnails and also could import files in to LR4.I enjoyed using vibration etc and it is easy to export (to H264) in comparison to cs5 PP. Now 2nd day onwards, I am not able to view thumbnails(video files) for importing nor files could be imported.Files already imported work fine with thumbnails. (Thumbnails while importing Video files are being displayed normally in LR3 without any problem)
View 2 Replies View RelatedImporting .cr2 files from a Canon 60d into Lightroom 4, or any other version of LR? I've been trying for quite a while, and while the video files show up for import, the raw files do not. 0 files listed. I'm simply trying to use the Import button in the Library, and selecting the 60d camera from the list while it is USB connected to my machine.
Details:
Lightroom version: 4.0 [814577] (Adobe Camera Raw 7 installed also)
Operating system: Windows 7 Ultimate Edition
Also have the entire Adobe Master Collection CS5 installed (and fully updated as of this AM). Memory card was formatted in the camera itself. Canon's DPP has no trouble importing the files via the EOS Utility, and I see the camera/SD card in Windows Explorer as a drive letter, so I know it's recognized.
Camera is fully firmware updated (1.10).
When the import "Preferences" changed.When I import DNGs, it COPIES them to another HDD and I cannot find out how to stop this.When I go to Preferences I do not see any way to change this. I am about ready to uninstall and reinstall.
View 3 Replies View RelatedI am having trouble importing RAW CR2 files from Canon 5D and 7D into Lightroom.
Some / half of the files will import from the memory card, but at some point in the import process I get an error message that reads "The following files could not be imported because they could not be read" . Then I am unable to import the remaining files at all.
I'm running Lightroom 5 on OSX 10.8.
I have been getting this problem for the past 6 weeks. Usually If I shut down Lightroom, restart computer and begin the imprt process again, this second import will work fine. I put it down as a bug that wasn't a big deal, because after 2 or 3 import attempts everything would be OK.
But now Lightroom won't import my final 130 images at all. So far I have
- deleted the Lightrom preference file (it didn't work)
- tried different USB ports, cables and card readers (it didn't work)
- checked my permissions on the destination folder and disk, and confirmed that they are "Read and Write"
I don't think the files are the problem as I have been able to import 400 of the 600 RAW files from the memory card so far.