AutoCAD 2010 :: Crash Big Time On Multiple User Environment?
Jul 20, 2013
My working company currently practicing multiple user per pc. The autocad can run smoothly during the 1st time windows user account setup. But later on, after few days it start crash. The app will load and run but just for doing simple thing such draw lines, polilines n such. When i want to access the task panel, it crashed. Same if wan to load application, lisp etc. It only work fine under the user account which it is installed in. My user account have the administrative privilege and i'm running Windows XP platform (x32).
View 1 Replies
ADVERTISEMENT
May 31, 2012
I have created an environment variable called "SUFFIX", and assigned it the value "PSI", using the following command sequence:
setenv<enter>SUFFIX<enter>PSI<enter>
It works fine for what I'm doing (a toolbar button macro using DIESEL in AutoCAD LT 2011), but now I want to set the variable SUFFIX to be empty: not a space, not anything at all. I can't figure out a keyboard input that will do that.
P.S. Perhaps there is an AutoCAD variable that consists of a null string? If so, I could "$M=" to get that null value and place it in SUFFIX.
View 4 Replies
View Related
Dec 30, 2013
im currently running a
Precision T3500
Xeon W3520
Quadro fx580
6gb ram
Win7 Ultimate
I'm only running Autocad 2013 LT on my computer without servers.
I need to open multiple files at a time with some of them being 40mb large. Problem is it takes quite sometime to open the large files.
What can i do to improve the performance of opening and working with larger files? Would adding more ram dramticaly improve it? If not, i would go about buying a new i7 cpu.
View 4 Replies
View Related
Mar 23, 2011
I'm relatively new when it comes to 3D applications.Basically, I have created a scene of the Earth from space, and have managed to create a relatively good looking still image.
However, for my project I need a full 3D environment map, and so far I have been unable to produce this with the environment map option in the rendering tab. Basically when moving the camera, the background stays exactly the same, but I want the background image to pan aswell - having a fixed image makes no sense when panning around a 3D scene if I'm being clear :/
I tried to use video post, but every time I try to execute the render Max hangs on "Transforming Vertices". It does this on full scenes and totally blank scenes, but so far has only done it when rendering a camera view, not perspective. The only way out of Max is to close it from the task manager when this happens. I searched all day yesterday for a solution to this, but the only thing I could find was to alter the bitmap pager, which 2011 doesn't allow customization of.
So after I gave up on Video Post ever working, I rendered the inside of a tube with a star map. I have problems with the texture looking right when I do this however, it looks stretched, blurred, and the joins between faces are very apparent.how to make an environment map fully wrap around the scene, and pan with the camera.
View 8 Replies
View Related
Oct 18, 2012
Is there a way to export multiple layout tabs to create individual CAD files at one time? I have a CAD file with 80 layout tabs. All the Drafting work was done on Paper Space of the Layout Tabs. Client wants 80 separate CAD files.
I tried right clicking on the layout tab but it will ONLY allow me to export one tab at a time.
View 5 Replies
View Related
Jul 3, 2013
Is it possible to create multiple frames in a single assembly environment? (i.e. Frame0001, Frame0002)
The members all lump together in one Frame regardless of when they are created in the workflow.
I know there is a workaround for this by making each frame in its own assembly...but that will be more cumbersome than it is worth in this application.
Right now I have just created folders in the Frame0001 to sort things out, but the folders are not very flexible as far as moving things in and out or reordering...it is a pain.
I've used the Frame generator to create my existing building columns, existing platform columns, and existing handrail. I'll be using the frame generator pretty soon here to build a new platform, which I would love to keep separate from the existing steel.
I suppose I could save the current assembly and insert it into a new one so I can add the new equipment, but I'd rather avoid large subassemblies like that. Seems like it would be a lot easier to just have an option to create Frame0002.
(Inventor Professional 2014 Update 1, Windows 7 Professional)
View 7 Replies
View Related
Apr 25, 2012
When working in Inventor within a Vault environment, you have a check box on the "Check In" dialogue box for "Close files and delete working copies" that once selected, it stays selected until the user unchecks the box.
(see below)
Not so when working with AutoCAD....why?
Why is it that every time a user checks a file into Vault from ACAD, they have to check that box?
There has got to be a seting somewhere that this check box stays selected. Why isn't this a default? How to "lock" that down?
View 4 Replies
View Related
Feb 2, 2014
I'm trying to change "capture time" of multiple photos to a specific time.
I know that there is "Edit Capture Time" feature under Metadata. But when I try to edit multiple photos, it says that "Modify the capture time stored in the selected photos by entering the correct time adjustment for the photo displayed to the left. Other photos (but not vidieos) will be adjusted by the same amount of time". And it really does.
For example,
If A file's capture time is 1/11/2011
B file's capture time is 1/11/2012
C file's capture time is 1/11/2013
I would like to change their capture time to 1/11/2014. All the three files.
But the current "Edit Capture Time" feature of Lightroom just adds three years to each file like this:
A file's capture time -> 1/11/2014
B file -> 1/11/2015
C file -> 1/11/2016
So their capture times remain as different ones. And this is not I want...
I've googled a lot and tried several programs other than lightroom as well, but the "Capture time" recognized by lightroom could not be changed by other programs.
View 15 Replies
View Related
May 30, 2012
getting Civil 3D to crash every time the Map Task Pane is opened from the Ribbon? if you type in MAPWSPACE, then it seems to "initiaite" it to work ok, but if you go right to the Ribbon: View tab > Palettes panel, and click it on there, it crashes every time.
View 1 Replies
View Related
May 30, 2012
trying to create contours from an exiting survey file. I am new to Civil 3d 2012. What I need to accomplish is create a 3d topo from the points with contours and then create a 3d model of the area.
View 9 Replies
View Related
Aug 28, 2012
I had an engineer use another engineer's desktop computer for a week. When the orginal Engineer came back to work and started trying to use AutoCAD 2010 it now wants to write to the second engineers Windows profile.
View 6 Replies
View Related
Jul 25, 2013
two of my colleauges opened a photoshop file at the same time and both could make changes. Saving the file kills one person's changes, which actually shouldn't be possible. How can this be avoided?
View 4 Replies
View Related
Nov 2, 2012
Let me give you the details, as they are fairly specific to this issue -
First, here's my puter info: Lenovo ThinkPad Edge E520, Intel i5-2410M Core proc @2.3Ghz, 4Gig RAM, Win 7 pro 64 bit.
PSP X5 - version 15.1.0.10.
Here's da scoop:
Open X5
Open jpg file (have tried various sizes, both physical and pixel, and makes no difference)
Add Raster layer
Create tiny color dot on new layer
Merge layers
Dies, freezes up, have to shut it down and lose what I just modified.
Now, mind you, I've been using PSP since way back in the Jasc days. For years I was one of their beta testers, because I USE THIS EVERY SINGLE DAY! Literally, I'm in it every day. I love X4, still trying to get into X5, but similar to when X4 came out, X5 is slowly PMO'ing me! I create hundreds of scripts, and lots dozens of plug-ins, and so far the majority seem to work fine in X5, however this whole issue of it crashing and freezing up my puter is really getting on my nerves.
After the crash, I can re-open X5 and it'll work fine on the first image. Then next image, SSSD!
Really is getting aggravating this constant crashing. Starting to think that Corel isn't creating this software but Microsoft is
View 3 Replies
View Related
Mar 12, 2012
I use window 7 64 bit so Lightroom installer install the 64 bit version for me. Everytime I click on the import button lightroom 4 would crash. I have try to create another catalogue, same problem.
View 17 Replies
View Related
Dec 11, 2011
I have no issues when using autocad for simple 2d drafting, layers and commands seem straightforward enough, but I am having real difficulty with the 3d interface when set up with 4 viewports, similar to Rhino (top, front, right and perspective)
Question #1: can I link the viewports so that moving around in 1 moves the other simultaneously to the same zoom and location?
Question #2: can I set up the MButtonPAN (or similar for orbit) command to orbit ONLY when in a perspective viewport? (in rhino, the right mouse button always orbits in a perspective viewport, and pressing shift with right mouse button can pan, ideally this is what I need or some variant of it). It seems very cumbersome to have to use the orbit button every time I want to adjust my perspective view!
Basically I want to make my workflow as similar to Rhino as possible, as it has become deeply engrained, and so far the crossover is not going well.
View 8 Replies
View Related
Sep 7, 2013
So I have this issue where opening the compact material editor a second time causes 3ds max design to totally crash. I cant figure out why it is doing that. I have tried reinstalling the software, even tried re-dowloading it and nothing works, have all the service packs and so on. Funny thing is that it works when using the slate editor. I can recreate the bug every time. Just open 3ds max design 2014 x64. Press material editor (assuming its in comact mode), close the editor and then open it again. Immediatly the program will crash to desktop, telling me that the progam has stopped responding.
View 1 Replies
View Related
Jun 9, 2013
Every time I try to create multiple section views in Civil 3D 2014 the system hangs and never generates the views. It looks as if it's processing but it never stops and never generates.
View 4 Replies
View Related
Jan 27, 2012
working on one big file with Vault/multultiple user scenario?
Lets say you design a car and having the frame and the body you have different guys that come in and do electrical, fuel system, so on... They need to work with the frame and the body doing their parts, since thats the reference for them.
But only one guy can check it out. We try the approach that one system is an entire independent assembly inserted into the top assembly but its not perfect.
View 1 Replies
View Related
Dec 18, 2013
If you create any custom coordinate systems in 2014 products (Civil3D, Map3D) *.CSD files are created in C:Users{user_name}AppDataLocalAutodeskUser Geospatial Coordinate Systems with the additional data in them.
My question is - can you have multiple 'coordsys.csd' files?
The reason for asking is that we are setting up a large number of low distortion projections that are specified by a government roading agency and I figure the best way to distribute these is to create a coordsys.csd with them and sync it out to everyones profile (the location shown above), but there could then be issues if a user then sets up some additional coordinate systems that will only be on their computer, if we altered or expanded the company definitions and sync'd these out again it would overwrite the users ones.
It would be good to be able to have mutilple custom coordinate system files - ones for particular clients, countries, individual users etc.
Civil3D 2014 - Windows7 64bit
View 4 Replies
View Related
Feb 27, 2012
how to fix an issue I have of autocad hitting 100% cpu? It's mainly when copying. It's used on server 2008 r2 by multiple users through xenapp.
View 2 Replies
View Related
Sep 12, 2012
i have atocad 2011 installed on my computer (64 bit), a HP Pavilion p6370nl desktop pc, and also have a new videocart: nvidea gt 640, but if start atocad, it starts, and close then. what to do? i already have reinstalled it and also repaired it so...
View 9 Replies
View Related
Aug 24, 2012
I have downloaded AutoCAD 2012 and when I try to open it my computer automatically shuts off without even openig AutoCAD. I tried downloading the newest version of AutoCAD 2013 and it does the same thing. Inventor fusion seems to open and work properly but not AutoCAD.
View 1 Replies
View Related
Dec 28, 2011
Im trying to xref an dwg. Autocad is crashing every time im trying. I have tryed AUDIT, saved in 2004 and 2010 format. It crashes every time...
View 9 Replies
View Related
Jan 30, 2013
Parametric Drawing about .net API。
I define a user Variables in autocad2010(such as variableaa=10),I want to use the variable to drive the dimension of a line。
Now I want to change the value of variableaa through .net API，can you tell me how to change the value of variableaa through .net API? can you tell me the code?
View 2 Replies
View Related
Mar 7, 2012
Had a system crash. I had Norton 360 using a slave HD as my automatic backup source. To reinstall windows, master HD was overwritten. I thenfound out Norton 360 didn't save my autocad files to the slave HD. Their definition of "other files" didn't cover dwg files unless you did an extremely detailed setup process, which, was not in the Norton instructions. Anyways, local computer service was able to recover about 60% of the "lost" autocad files.
Of those recovered files, about 60% will not open up. Only get a message "not a valid file" The file details show its an autocad file, its size, and the last date of revison.
View 1 Replies
View Related
Aug 28, 2013
AutoCAD 2010 civil 3D.
Main issue is frequent crashes of the AutoCAD software. Sometimes 10-12 time's in a day. Unfortunately their are no error messages, and I have yet to see any pattern in when and how it crashes.
The problems I can see are the workspace, and process memory of my system. The workspace does not load correctly. The Ribbon shows multiples of the every tab at least twice. All tabs show the commands but not the pictures associated with the commands. CUIload shows correct workspaces.
Second note is that my system runs the same .dwg file's at 2/3 the processing memory than any other identical systems I run AutoCAD on.
Third, through my digging and attempted solutions I found that the AcSignCore_.dll file was missing.
I have: re-installed 3D twice, updated graphics drivers on my system and run open close save hotfix as well as AutoCAD2010 update 2 for 64 bit system.
View 3 Replies
View Related
Oct 4, 2012
When creating a PDF from a DWG AutoCAD LT 2010 (running on windows 7) I get the following error.
unhandled access violation reading 0x6a162be0 exception at 6a162be0h
This only happens the second time I create a PDF - the first time it is very quick and there are no errors
I have tried a repair and a reinstall but am still having the same issue.
View 5 Replies
View Related
May 23, 2012
This happens with a number of drawings, I believe all the files are very large approximately 8mb+. The issue is that by using the REGEN or the Zoom - Dynamic command, it will freeze AutoCAD. I will have to conduct a force shutdown than restart the program.
My question is; where do I start to determine what is the cause? Where do I find an error log?
View 1 Replies
View Related
Nov 3, 2011
I tried to print the layout from autocad, the autocad will freeze and it will prompt out the AutoCAD Application error message as the attachment below. Once click on "cancel", the application will shut down itself.
*The printer is HP LaserJet P5225.
*Other program like Revit, MS Word and etc still able to print well.
*Computer spec: Windows 7-64bit, 12 GB RAM, Xeon processor.
*Installed with the HP original driver from original disc that given
View 9 Replies
View Related
Jan 1, 2014
II have been creating rectangles using rec and because it is a polyline I get the "midpoint" nodes which I need to keep. I often have to modify these by increasing their length or shortening them, large numbers of them at times. Currently I have to select each "midpoint", of the rectangle, one at a time in order to change all of their lengths at one time.
1.jpg
6.jpg
I am trying to find a faster way to select the "midpoint" of several rectangles or some other way instead of the individual method that I have been using. I've tried trim, extend, and stretch. Maybe there is another that I am not considering.
Trim removes the bottom line completely and retains only 3 sides so this doesn't work.
4.jpg.
Extend does the same thing and stretch works very different than what I am trying to do.
This is my exercise:
6.jpg
7.jpg
8.jpg
View 9 Replies
View Related
Sep 5, 2012
My coworkers are positive that they have been able to INSERT multiple blocks at one time but now when using the INSERT command, they can only select a single block for insertion. I tried recreating the issue and it does the same thing for me both using DESIGN CENTER and the INSERT command. Is there a setting somewhere that controls the number of blocks you can INSERT at one time or are they just delirious?
If it isn't possible to do in AutoCAD, then is there possibly a LISP routine out there that will achieve this?
View 4 Replies
View Related
