We have just loaded the following the this order, AutoCAD2013, Revit MEP then Navis Simulate. All 2013. Everything works, including the NWC export from Revit MEP and the export from AutoCAD.The problem is that when you submit the NWNAVIGATOR command, Autocad thinks about it and then crashes out of AutoCAD. We have switched off the Hardward drivers.
View 4 RepliesWe have loaded copies of AutoCAD Architecture 2013 on several workstations. We had tried brining over older profiles (from 2008)- which did not work, so made up new ones. ANYTIME we go into the profile settings to load a different profile beyond the default, AutoCAD Architecture (US Imperial), eventually while working the program will crash. We've wiped out installations of the program, registry and all, and re-installed without brining over any prior data. Same issue.
Even when using a seperate "default" profile us as (Global) or (Metric)- same issues. The problem with staying/modifying the workspace for the US Imperial is it will not load the complete menus with the MENULOAD command (only loads EXPRESS). If we work within the (US Imperial), no crashing, but again, the menus are not available within that profile for some reason, so that is not an acceptable solution.
Autocad 2013 x64 and DWG TrueView 2013 x64 crash when print on HP LaserJet 5200 (A3)
APPCRASH
acad.exe
25.0.55.0
4f309adb
StackHash_c855
6.1.7601.17725
My girlfriend has a problem with AutoCad 2013 students version. After attaching pdf file in underlay option AutoCad crash. She's got macbook air with system version OS 10.9. She had not ever problems with pdr iunderlay before.
View 1 Replies View RelatedI am having a problem with AutoCad 2013 crashing. While running the program when I use the open command dialog box if I re-name a file, create a folder, or copy a file autocad goes unresponsive and crashes immediately afterward. I have installed the service pack and update my video card driver trying to fix the problem. I used to be able to perform everything mentioned above in AutoCad 2010 without any problems. I don't think its my computer causing the problem because everyone else in my office is having the same issue with 2013.
View 5 Replies View RelatedI need to re-install my ACAD 2013. I get to the Product License Activation Options and have the activation code when I first installed. This time it dont work. I bet it something to do with multiple install. Error code is: 0015.11.
View 2 Replies View RelatedAutoCAD MEP 2013. Having a repeated crash when creating a 2D section view. Works great up until I place the 2D section and then crashes. I have tried using sections from Electrical and Arch palletes but same thing. I've used this tool thousands of times on other versions but this is the first time with 2013.
View 2 Replies View RelatedI am using Windows 7 64 bit laptop. When I close a drawing just after saving in AutoCAD 2013 64 bit, the program crashes. This will happen with one drawing open, or several. I also had this problem with 2011.
I have been using AutoCAD for 16 years and never had this problem with previous versions on earlier operating systems.
I've been crashing (fatal error, unhandled access violation) a LOT lately, and it happens when I'm changing between tabs - both between layout tabs and from layout to model. I have a brand new computer and a recent install of AutoCAD, which I also ran the repair routine on recently to try to fix the crashing issue. This happened with my old computer as well, and our IT people thought maybe it was too old to handle AC 2013 (old one was about 7 years old), so now I'm running an HP Compaq Elite 8300, Win 7 OS, with an Intel i5-3470 CPU at 3.2 GHz, 8 GB of RAM, and an NVIDIA NVS 300 graphics card. And it still crashes.
I'm using files that were created on my old CAD station, which ran AutoCAD 2008 LT, and it started crashing on me - I suppose it's possible that one or more of those files got corrupted and that's what's causing this.It's crashed three times in the last three days, and probably a total of 10 - 15 times since my new computer came in late last month, and I'm getting pretty tired of it.
After upgrading/switching my stand alone license from Civil 3D 2011 to Map 3D 2013, my computer is crashing before a complete opening of some larger dwgs (1575 KB). Sometimes I get an Out of Memory message.Other (much smaller) drawings open fine.The switch from Civil to Map was made because we were not using any of the civil bells and whistles that make it unique.
Map suits our needs. We use shp files (data connect) to generate most of our work.I can use another computer in our office that has Map 3D 2011 and am able to open up any of the drawings with no problems. Because I had no issues with Map 3D 2011, I thought moving up to 2013 would be "easy".
We have a subscription and every couple of years try to load up the latest and learn to live with it.Now I am wondering if we can all just go to Map 2011 and forget 2013.
The big problem is that when am doing whatever work, the program stop working and show a error message, that says: ERROR FATAL: Unhandled access violation writing 0x000 exception at 70601612h
[URL]
And it happens when i'm on any kind of views or after printing..
My Pc is an: Intel Core i3-2100 CPU @ 3.10GHz
4gb Ram
Windows 7 ultimate x64 bits
I DON'T HAVE AN VIDEO CARD. I use the one that provide the Motherboard.. Thats Intel HD Graphic 2000
getting consistent crash when clicking on "new" in page setup manager dialog box.
Happens regardless of which drawing is open. Even for new blank drawings.This prevents me from creating new pagesetup overrides for Publishing. MAJOR PROBLEM.
At this point I have to get other people in the office to create new page setup for me. Editing existing page setups works find, only the "new" setups are a problem.
AutoCAD 2013 (G.114.0.0 SP 1.1), Windows 7.
Also, AutoCAD internal crash reporter is not called. Goes direct to Win 7, "Application has stop working" dialog.
We just upgraded to 2013 software and anytime i change the ribbon to anything besides the default Inventor crashes.
View 9 Replies View RelatedA colleague was working on a drawing yesterday in AutoCAD 2013 when it crashed. Since then the drawing has refused to open in AutoCAD 2013. It also does not open Trueview. It will however open in previous version of AutoCAD. We tried to export it to .dxf as well but they are corrupt. We also tried to attach it to a new drawing as an Xref and as a block, both were met with an instant fatal error and the closure of AutoCAD.
We have tried auditing, purging, resaving, using backs-ups. None of them will open in AutoCAD 2013 any more. The drawing closes without attempting to open with no error messages. It just loads up the default drawing(x).dwg.
We use 2012 primarily, and I finally installed 2014 on 2 different machines. Both work ok until I load the 2012 profiles. Then, AutoCAD wont even start after you close and re-open. We use a lot of custom lisps and menus that i need loaded into 2014.
View 3 Replies View RelatedI have no this problem for version before Inventor 2013, just start from this lates version.
I models a ballet bar assy in 2'6" width with derived sketch, then I used DA to copy all the files with new name in 4'. After that, I tried to open the new files, it crashed itself, no matter I open a part or assemble.
But if I changed the derived sketch name back to its original, everything is fine for new files.
I attahced the zip file, try it. If it crashes, just change file: BALLET BAR 4ft_SKETCH
to: BALLET BAR 2ft-6in_SKETCH
everything is fine then.
We have our AutoCAD2013 freezing for at least 4 times a day, on all 5 Computers.
I want to do that Customer Error Reporting thing, but no Window appears after the Crash, and I haven`t found it in the options yet.
The Computers are 3 x Fujitsu Esprimo P900 with an additional Graphic Card.
Intel Core i3, 3.3 GHz and 6 to 8 GB Ram.
2x is Windows 7 64bit and one is 32bit with 4GB RAM.
And the other two are Fujitsu Celsius M470 with 3.46GHz and 8GB RAM. NVIDIA Quadro 6000.
All Patches and Updates of AutoCAD2013 are installed. Why it crashes, why the CER doesn't appear?!
I recently gave my windows a factory restore (fresh start windows original copy), I had no issues with autodesk software before the windows fresh start (i use Revit and 3Dmax too), i even installed and used Autocad 2014 on my laptop before the restore and it ran just fine, problem is now after the windows restore Autocad crashes everytime i open it, installation was smooth and succesfull with no error warninings whatsoever; the problem comes when i start Autocad 2014 for the first time, the initialization window opens and starts loading the files but then (everytime) crashes and freezes my laptop forever, not even the task manager is posible to open
My Specs:
Laptop: Alienware M14x R2
Processor: intel i-7 @2.30 ghz
16 gb RAM
Graphics: Nvidia GeForce 650M 2GB
running on Windows 7 64-bit
after the restore i downloaded the latest drivers for my graphics card, so that shouldnt be the issue, i also switched the processing tu GPU only.
i already tried lots of solutions i saw on other posts, but none seems to suit my need, i tried the .NET framework thing, switching off the windows Aero theme, but the problem remains the same, it still freezes completely my laptop everytime i try to run Autocad 2014, i even tried installing Autocad 2013, Autocad 2011 and Revit 2014 but the issue is the same in all of them they freeze at startup without any pop up error warnings, just freezes.
Getting an "AutoCAD stopped working" message then system crash while working in AutoCAD Civil 3D 2013.
View 2 Replies View RelatedI want to know if it is possible to creat a script that will rotate the cam wheel show at the pivot point, while causing the rectangle to oscillate up and down in cadence with the ppoint of the whell that is contacting it.
I have a simple script that rotates the cam wheel, but every time I run it, AC crashes. I am on Windows 7 Ultimate 64bit and I have installed the latest service pack. Here is the script:
rotate
g
1
45.5447,44.7299
1
rscript
I'm not sure what other information you may need to diagnose this, so just let me know. There is no error message given, it just freezes up.
We have a big problem on several PC's with Acad Map 3D
if the users import their old (Acad 2010 Map 3D) files where symbollists and view settings are stored.
After a restart of Acad it hangs up with following Errors (See attached).
We can solve this issue temporary with restoring the defaults.
So the problem is importing old files so i think it is not campatible with this old acad 2010 files.
Is there a way to import such old files?
Some times it happens that when I make an orbit to a 3d model it seems that Autocad could not process it and it shoots down with a fatal error message. This is occuring quite often. why is this?
View 4 Replies View RelatedFatal error occurred when invoking 'Send Feedback'.
However, the appropriate website does open after AutoCAD crash.
I'm having an issue with Inventor crashing every time I attempt to follow this exact procedure:
1. I have a drawing open with an iAssembly or iPart in it.
2. I edit a view by double-clicking the view, opening the 'Drawing View' dialog box.
3. I open the 'Model State' tab.
4. In the 'iAssembly/iPart Member' menu box, I select a different member.
Now, it may or may not open the 'Save' dialog box. If it does, then I click 'OK' and poof, Inventor crashes without fail, asking to send in a crash report.
The same thing happens if I start a brand new drawing and attempt to follow the same procedure while inserting a Base view.
Now, I know for a fact that the not all of the drivers are not up to date on my computer, I am not using a recommended graphics card, and I am using SP1.1, not SP2. I have notified my IT guy about this, but he has yet to get back to me. I don't now if/when everything on my computer will be updated. I do not have admin rights to my computer.
In the mean time, Inventor has become essentially useless for me until this issue has been resolved. how I can get these drawings to start working?
As soon as I start up AutoCAD 2013 or 2012 64-bit, it loads all the way through and I get an error message:
FATAL ERROR: Unhandled Access Violation Reading 0x0000 Exception at 0h
I have uninstalled and reinstalled AutoCAD multiple times, followed the clean install instructions.
I have run as administrator, run in compatability for XP and 7, run with the onboard graphics, run with my nVidia card, and have had no results. Boot in Safe Mode, no changes. Disabled my Antivirus when installing, and when running, no difference. Installed SP1, no difference.
I sent the following message to autodesk:
Issue: Dynamic Block causes crash
Preface: A dynamic block c/w a "flip" parameter and a multiline attribute will crash when the block and attribute is flipped, and the attribute justificatiob modified.
Explanation: When the dynamic block is flipped, the multiline attribute is also flipped causing its justification to switch from "top left" to "top right". When the attribute is edited in the in-place attribute editor to switch the justification back to "top left", it causes AutoCAD to crash.
Workaround: Instead of using the in-place attribute editor (i.e. same as MText editor), the attribute justification is changed by modifying the attribute properties in the "Enhanced Attribute Editor" dialog box - on the "Text Options" tab
After an AutoCAD/Windows crash, I reboot. The system begins to load Windows (Win 7 splash), then the screen goes blank and a white Windows cursor appears -- nothing more; no desktop or taskbar.
Control-Alt-Del does nothing, however, the HDD light continues to flash as if it is continuing to boot. The same thing happens when I boot in Safe Mode (except cursor is larger due to different resolution).
I can boot from bootable CD and everything works fine. HDD scan and memtest both pass. I formatted the drive and reinstalled Windows and AutoCAD and everything works fine. However, two days later, the same exact problem occurred on the second of five workstations.
Details:
Win 7 Professional 64bit
MS Office Home and Business (with Outlook configured for IMAP)
i7 processor, 6GB ECC RAM, Nvidia Quadro 600 w/1GB RAM.
AutoCAD 2013 was originally loaded from a trial version, then purchased license key installed.We are using Xref on a file server and opening drawing on a file server across a ethernet Gbit lan.
My AutoCAD 2013 crashed and as a result the recovered file was saved in 2013 format, instead of my automatic save profile option version set to AutoCAD 2000.
As we have other users in the office without AutoCAD 2013, how do i change the default crash save to a newer version (ie. AutoCAD 2000)?
I have a mech/mfg-necessary pattern set on several parts, to the tune of about 90 slots and 500 holes each. Inventor is absolutely sucking it up handling these parts, and the assembly of these parts together is just a complete nightmare.
I have half-hour load times, constant crashes, and to top it off, they're iparts (used in an iassembly), which means I am constantly having to regenerate the whole part family with every change, a process that can take literally hours.
Are there substitute tricks, or display setting shenanigans I can pull? All of the features are individually needed somewhere, but no mgf machine needs all of them present at once.
At my office, we are experiencing a major malfunction with AutoCAD and server based files. I believe it is due to a server restructuring that occurred last week and we are having troubles since then.
Basically, on some drawings, all I need to do is select a HATCH object (of any size) and AutoCAD crashes. The same behavior is exhibited when editing an MTEXT object or, say, a dimension TEXT. I was also able to recreate the crash by typing STYLE, trying to edit the text STANDARD template, and essentially anything having to do with "simplex.shx."
I have been using AutoCAD 2014 for a couple of weeks now and there seems to be a problem when switching from the model tab to the layouts.
This is the problem i have: I draft my plans in model space as usual, once i finish that, i want to go to the layout tab
where the titleblock is and modify its attributes. When switching, AutoCAD crashes, it allows me to save a recovery file but it closes the program completley.
I have submited the error report to AutoDesk but i have not seen any other comments about it.