AutoCAD 2013 :: Drawing Fails To Open After Crash
Nov 19, 2013
A colleague was working on a drawing yesterday in AutoCAD 2013 when it crashed. Since then the drawing has refused to open in AutoCAD 2013. It also does not open Trueview. It will however open in previous version of AutoCAD. We tried to export it to .dxf as well but they are corrupt. We also tried to attach it to a new drawing as an Xref and as a block, both were met with an instant fatal error and the closure of AutoCAD.
We have tried auditing, purging, resaving, using backs-ups. None of them will open in AutoCAD 2013 any more. The drawing closes without attempting to open with no error messages. It just loads up the default drawing(x).dwg.
View 9 Replies
ADVERTISEMENT
Jan 10, 2013
I am having a problem with AutoCad 2013 crashing. While running the program when I use the open command dialog box if I re-name a file, create a folder, or copy a file autocad goes unresponsive and crashes immediately afterward. I have installed the service pack and update my video card driver trying to fix the problem. I used to be able to perform everything mentioned above in AutoCad 2010 without any problems. I don't think its my computer causing the problem because everyone else in my office is having the same issue with 2013.
View 5 Replies
View Related
Jul 31, 2012
I am using Windows 7 64 bit laptop. When I close a drawing just after saving in AutoCAD 2013 64 bit, the program crashes. This will happen with one drawing open, or several. I also had this problem with 2011.
I have been using AutoCAD for 16 years and never had this problem with previous versions on earlier operating systems.
View 9 Replies
View Related
Jun 6, 2012
After upgrading/switching my stand alone license from Civil 3D 2011 to Map 3D 2013, my computer is crashing before a complete opening of some larger dwgs (1575 KB). Sometimes I get an Out of Memory message.Other (much smaller) drawings open fine.The switch from Civil to Map was made because we were not using any of the civil bells and whistles that make it unique.
Map suits our needs. We use shp files (data connect) to generate most of our work.I can use another computer in our office that has Map 3D 2011 and am able to open up any of the drawings with no problems. Because I had no issues with Map 3D 2011, I thought moving up to 2013 would be "easy".
We have a subscription and every couple of years try to load up the latest and learn to live with it.Now I am wondering if we can all just go to Map 2011 and forget 2013.
View 6 Replies
View Related
May 15, 2013
I'm having an issue with Inventor crashing every time I attempt to follow this exact procedure:
1. I have a drawing open with an iAssembly or iPart in it.
2. I edit a view by double-clicking the view, opening the 'Drawing View' dialog box.
3. I open the 'Model State' tab.
4. In the 'iAssembly/iPart Member' menu box, I select a different member.
Now, it may or may not open the 'Save' dialog box. If it does, then I click 'OK' and poof, Inventor crashes without fail, asking to send in a crash report.
The same thing happens if I start a brand new drawing and attempt to follow the same procedure while inserting a Base view.
Now, I know for a fact that the not all of the drivers are not up to date on my computer, I am not using a recommended graphics card, and I am using SP1.1, not SP2. I have notified my IT guy about this, but he has yet to get back to me. I don't now if/when everything on my computer will be updated. I do not have admin rights to my computer.
In the mean time, Inventor has become essentially useless for me until this issue has been resolved. how I can get these drawings to start working?
View 3 Replies
View Related
Apr 8, 2012
The Photoshop 6 beta program froze while using the crop tool on an image size of 8052x5368. I tried to save a file in another program while waiting for the crop to finish (usually about 1 second) and got an out-of-memory error. I checked the D: driv where the file in the other program was saved.
I have a flash C: drive and is not selected in the scratch disk preference. Two scratch disks, E: and G:, are selected with a total of about 800GB free space. After closing PS6Beta, the D: drive recovered about 164GB. The D: drive is not selected in the Scratch Disk list. I work with larger files and anticipate this problem again.How can I trap information for Adobe next time?
Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x32
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:14, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
[code]...
View 3 Replies
View Related
Feb 22, 2013
I'm in AutoCAD 2013. I've been working on a drawing everyday (was just working on it yesterday), but can't open it now. I just get a blank gray screen when I open if from within AutoCAD. When I open it from my computer drive while AutoCAD is closed, AutoCAD opens and I get "Drawing1.dwg." I've tried the RECOVER command, but I don't get a response. I tried RECOVERALL command which let me choose a file to recover, but it responded saying it could not recover the drawing.
View 6 Replies
View Related
Aug 13, 2013
Is there a program available to convert newer Autocad files to older versions? I have a 2012 file that I want to read in 2008.
View 2 Replies
View Related
Apr 26, 2013
When opening a drawing that turns out to already be open by someone else, the "Open as read-only" warning isn't showing up for one of our users. This is becoming confusing and in the end someone's change will not take. Is there a setting that may be turned off?
View 9 Replies
View Related
Dec 26, 2012
I have drawings (some with more than one sheet) from inventor 10. Now I like to open it in inventor 2013. The first sheet is showing, but I can't open the other sheets. I can print them, but I can see a listing of it or go to the sheet.
FYI, until December 2012 I worked in Inventor 10, now I have inventor 2013, so everything is new to me.
View 9 Replies
View Related
Oct 29, 2012
Just got the upgrade from 2012 to 2013 AutoCAD. When I opened the file from 2012 to 2013 for editing, my sub-xref file become "Unreferenced". The main Xref is loaded and fine. I tried to reload it but it doesn't work, and only its text path that are shown in there. It seems that the sub-xref file is in the right path when I trying to verify it location. So, what I did was use my old 2010 Autocad to finish my task which work fine. Why my sub-xref is in "unreference"condition using 2013 AutoCAD.?
View 2 Replies
View Related
Jun 1, 2012
I don't understand why the right click - open drawing command had to be put in a submenu. Is there a way to customize the commands on these right click menus other than the marking menu? I don't really like the marking menu, and I don't want to put it there. There was nothing wrong with where it was... There are so many commands in the basic right click menu that a good majority of inventor users don't use. At least give us the ability to customize this.
View 9 Replies
View Related
Jun 28, 2012
I recently purchased AutoCAD Civil 3D 2013 and all of a sudden when I select "File", and "Open", the dialog box from which I am supposed to select a drawing file has a small "Initial View" box with a small check box to "Select Initial View". This box seems docked to the right side of the "Select File" dialog box but I am unable to select the check box. It seems to do nothing. Is this a glitch?
View 1 Replies
View Related
Jun 1, 2012
I use Autocad since version 2.0. My THUMBSAVE value is 1.Still not showing a preview of the dwg.
View 9 Replies
View Related
Oct 5, 2012
I have a data set including .shx .shp .prj and .dbf files each named the same for landuse, rail, road, etc for a single city. How can I open these files to export a simple line drawing for use in a thesis project as a map.
View 4 Replies
View Related
Jul 20, 2012
We have loaded copies of AutoCAD Architecture 2013 on several workstations. We had tried brining over older profiles (from 2008)- which did not work, so made up new ones. ANYTIME we go into the profile settings to load a different profile beyond the default, AutoCAD Architecture (US Imperial), eventually while working the program will crash. We've wiped out installations of the program, registry and all, and re-installed without brining over any prior data. Same issue.
Even when using a seperate "default" profile us as (Global) or (Metric)- same issues. The problem with staying/modifying the workspace for the US Imperial is it will not load the complete menus with the MENULOAD command (only loads EXPRESS). If we work within the (US Imperial), no crashing, but again, the menus are not available within that profile for some reason, so that is not an acceptable solution.
View 5 Replies
View Related
Aug 29, 2012
Autocad 2013 x64 and DWG TrueView 2013 x64 crash when print on HP LaserJet 5200 (A3)
APPCRASH
acad.exe
25.0.55.0
4f309adb
StackHash_c855
6.1.7601.17725
View 2 Replies
View Related
Jun 6, 2011
When I place an Inventor 2012 part into an AutoCAD 2012 layout, the drawing view fails to update after a change is made to the Inventor file. When I click "Update View" in AutoCAD the command line says, "1 view(s) is up to date.", but the drawing does not change. Both the AutoCAD drawing and the Inventor part file are located on a server drive which is mapped as a network drive. AutoCAD displays the correct path in the drawing view properties. Running Windows 7 x64.
View 3 Replies
View Related
Jul 20, 2011
Autocad failes when i tried to directly opening a file from recieved attachment email. whereas it opens it properly when i save the files to hard disk drive.
View 4 Replies
View Related
Jul 9, 2013
I need to import .dgn elevation data (DEM?) into Civil 3D. When I attempt MAPIMPORT, DGNIMPORT, DGNATTACH, or from the "Insert" ribbon selecting "Import" and .dgn as the file type, Civil 3D will not respond and has to be closed and reopened.
The information likely includes surface and/or breakline information. Please see the attached (change file format from .txt to .dgn).
And if Civil 3D 2013 simply cannot import this information, does the Infrastructure Design Suite/Civil3D 2014 can?
View 9 Replies
View Related
Dec 18, 2012
Is it possible that i can save a revit 2013 drawing and open it in revit 2011 file?
View 2 Replies
View Related
Oct 3, 2013
Essentially, I've got a bunch of extruded polylines - so, some 3-d shapes - that I'm viewing in a new layout/'viewport' (?), which is set to SW Isometric view in '2D wireframe' viewing style. I've got my lines in different colors, mapped to be all black but different line widths in a custom Plot Style .ctb file.
So, when I change the 'page setup' to "display plot style", everything seems fine. All the lines go black in the viewport, and it seems as though I've configured everything correctly. When I preview an export to .pdf, however - or actually export it - this is lost. The export comes out in color.
I've done exporting using both EXPORTPDF, and PLOT, in both cases making absolutely certain that the .ctb file is being linked correctly (with EXPORTPDF, I've done it both using the 'current' page settings, and also 'override'), and with the PLOT, using the DWG to PDF converter,
I've looked through EXPORTSETTINGS, EXPORT...
On the same computer, with another earlier, simpler file, I have no issues accomplishing what I want.For additional information/to make things more annoying for me, at this stage, the previous file which DID work seemed to conserve layer information, and allowed me to edit individual lines later, if necessary... This colored "I don't care about your plot styles I'm not going B/W" file seems to just be a flat image.
I've compared the two files in two tabs extensively, and can't seem to find ANY other difference, in any of the settings...
Additional info:
PC running Windows 8, Autocad 2014, Adobe Reader XI...
Tried both the DWG to PDF and Adobe PDF plugins to export to PDF...
View 1 Replies
View Related
May 15, 2013
I have infer constraints to off (just in case) and I have these hints on every rectangle (in example) i create.
I do click on "hide all" but on every new creation I have the hints again......
I dont understand this behavior.
if I want to hide all I want to hide all always....
Civil 3D (2013) how much you have to improve....
View 2 Replies
View Related
Apr 19, 2012
Attached is a dwg file that refuses to complete the surface triangulation. Can some try this? The maximum triangle length is set to off. I'm out of guesses. If I move the furthest point around it will complete the surface but just not in it's current location. Point number 69
View 9 Replies
View Related
Nov 15, 2013
I have different SLDPRT files I would like to import into AutoCAD Mechanical 2014 (it's a student version).
My colleague is able to import those files, in my case it always fails even though we are having the same files and the same version.
He has Windows 7, I have Windows 8.1.
View 2 Replies
View Related
Aug 9, 2012
About 50% of the time, I get a crash when closing a drawing. When this happens, I get the following message: "AutoCAD LT Application has stopped working". This has been going on for sometime now and sometimes I am prompted to report the error, sometimes not. Everything shuts down, so if I have several drawing files open, I will loose any changes made unless I do a hard save for each one (which I have gotten used to doing).
I have the same problem with my license of Architectural Desktop 2004. My version of LT is 2011, running Windows 7 Pro, 64 Bit.
View 2 Replies
View Related
Jul 15, 2013
Open application, within 15sec there is a white empty pop up rectangular box on screen and my hour glass ticks away. Can not start the program/open a file. Force quit trigger shows "Photoshop not responding".
Reboot my MaC did not sort this. Checked with CC and the PS is up to date.
Should I re-download the app?
View 2 Replies
View Related
Dec 31, 2013
Problem in Photoshop Elements11 Editor The Organiser works OK.OS = Windows 7 with Internet Explorer 11Error message = 'Microsoft Visual C++ Runtime Library Error. Program: C: Program Files (x... This application has requested the Runtime to terminate in an unusual way.
View 2 Replies
View Related
Jan 7, 2014
My girlfriend has a problem with AutoCad 2013 students version. After attaching pdf file in underlay option AutoCad crash. She's got macbook air with system version OS 10.9. She had not ever problems with pdr iunderlay before.
View 1 Replies
View Related
Aug 20, 2012
We have just loaded the following the this order, AutoCAD2013, Revit MEP then Navis Simulate. All 2013. Everything works, including the NWC export from Revit MEP and the export from AutoCAD.The problem is that when you submit the NWNAVIGATOR command, Autocad thinks about it and then crashes out of AutoCAD. We have switched off the Hardward drivers.
View 4 Replies
View Related
May 22, 2013
I need to re-install my ACAD 2013. I get to the Product License Activation Options and have the activation code when I first installed. This time it dont work. I bet it something to do with multiple install. Error code is: 0015.11.
View 2 Replies
View Related
