I recently purchased AutoCAD Civil 3D 2013 and all of a sudden when I select "File", and "Open", the dialog box from which I am supposed to select a drawing file has a small "Initial View" box with a small check box to "Select Initial View". This box seems docked to the right side of the "Select File" dialog box but I am unable to select the check box. It seems to do nothing. Is this a glitch?
View 1 Replies
The Select Initial view checkbox in the standard file open dialogue has moved in 2013 from just above the File Name label to the file list window. Aside from the fact that it looks totally out of place design wise I find it obscures the file list. A way to revert to the previous behavior, or, even better, get rid of it all together because I never use it.
View 9 Replies View RelatedAs soon as I click the drop down the screen shows as blank and the program freezes. This happens with all the following commands, Save AS, Insert.
I have checked the FILEDIA and it is set to 1
I seem to have the problem with all autocad products on my Windows 8 pro desktop. I have tried Autocad LT 2013 & 2014.
When opening a drawing, since I've installed 2013, I don't have an initial view or preview of the drawings I'm selecting. In the open box, the "Initial View" or "Select initial view is unchecked and won't let me put a check mark in so I can review the drawing before opening.
View 9 Replies View RelatedI use Autocad since version 2.0. My THUMBSAVE value is 1.Still not showing a preview of the dwg.
View 9 Replies View RelatedMy stand-alone PC:
6GB of RAM
WIN7 64bit
AMD x2 240 processor 2.8GHz
After installing all products within Building Design Suite Ultimate 2013 and/or Infrastructure Design Suite Ultimate 2013 I try to open AutoCAD 2013 and get the attached screen. It just grinds and try to open but always shows "not responding". I've read posts that suggest uninstalling and re-installing. I've done this several times. I've used the Microsoft Fix-It engine to completely erase from the PC. I have even just installed the AutoCAD portion and it will not open. Each time I reinstall it asks me to supply all proper credentials, product code, etc. It shows green check marks so I know my codes are correct.
I've tried opening other programs and the only successful one is Revit. Am I to point the start-up of the programs to the licenses or something.
I consider myself an advanced CAD user and much of the evolution that hapenned since I started using CAD-14. However, one of the most annoying features introduced in CAD 2010 is the 'disappearing' layer dialog box once you go to select a color. So you open the layer, create a new one, go to select a color just before you assign it a linetype, lineweigth and make it current, but as soon as you open the 'select color' dialog box and hover over it the layer window just goes. I know you can just make sure you do the color selection last, but what if you want to create three different layers and assign them a color ? you have to open the layer window 3 times and look for your layers...
View 8 Replies View RelatedAutocad MEP 2013 was working fine until I installed SP1 yesterday.
Now when type in open the dialog comes up (not a filedia issue). When I click the "look in" pull-down in the open dialog it goes blank and I am unable to browse any folders. I've tried rebooting.. Should I reinstall?
My AutoCAD (2013) don't shows the preview in open dialog. I read something about edit a value in Regedit, but I don't have access to Regedit. Has other way to fix it?
View 5 Replies View RelatedCurrently have an iLogic rule in my drawing template that base on user input brings up the Drawing View dialog box (as though you click on base view). I want to know if there is some coding I can do to control or handle what happens if the user clicks the cancel command inside this dialog box. Possibly show a message box. Or even run another rule after the cancel button has been clicked?
View 1 Replies View RelatedIf I click the dropdown list in open command dialog, to select differnet location, it goes blank, after that nothing works,
Need to restart autcad.
how to sloce this issue?
I had reinstalled 2 times but still the problem persists
I'm using Autocad 2013, and the Open File Dialog Box has disappeared. Every time I try to open a drawing, it defaults to the command line. I have the same error with Image Attach. It's only my user. Other Users on the computer do not have this issue. Settings to change it.
View 5 Replies View RelatedWhen I open a new drawing, the open dialog window stays the same size which is usually too small. I have to resize it every time I open a drawing.
View 3 Replies View RelatedRecently upgraded to Civil 3D 2013 and drawings opened up fine. Now today any drawing that opens shows the plan view as last saved but then after loading takes the drawing and shifts it into a 3d view similar to a crossection. Is there a setting somewhere that has been changed? I noticed after a windows 7 update was preformed.
View 7 Replies View RelatedACAD 2014: VIEWSECTION ->Select Parent View: what is it that you're actually supposed to be selecting? It clearly has to be in paper space. I assumed it was a viewport but when I select that I get the message "1 selected, 1 filtered" and nothing is selected.
View 7 Replies View RelatedWhen I click on File>Open The dialog box no longer has a thumnail preview. Only a small grey box hovering on the right that says "Initial View" with a check box. I have attached a snapshot of my Autocad File> open dialog box so you can see what I'm getting on my end.
If I browse for files in windows explorer and change view option to thumbnail I can see the thumbnails just fine.
I've tried everything but I cannot get back my File> Open thumbnail preview.
In Tools> Options I have the thumbnail preview settings all set to save thumbnail preview image. Nothing has changed that I know if for the thumbnail preview to go away.
It's really slowing me down not being able to have thumbnail preview in the file> open dialog box.
I have a problem with previewing of new files I made in INV2013. Old files are OK. I can not find the cause...I also found, that some new files are correct and other incorrect, all made in INV 2013.
There are two types of error:
1) when I pick the file I want to open, in left lower corner - thumbnail window- is displayed text:"preview not available"
2) when I pick the file I want to open, the left lower corner - thumbnail window- is black
In iProperties panel I have checked "Save preview picture"
I've been running dual monitors (22" and a 18") for a while, but I just upgraded to a larger second monitor (now both 22"). Before, I left AutoCAD running in the main monitor, but now I've switched it to run in the second monitor instead. Now AutoCAD will not remember the position or size of the Open and Save dialog boxes while it is in the second monitor. Sometimes it throws them back into the main monitor and other times they show up in the second but without the resize I did previously.
View 1 Replies View RelatedThere are four of us in our office who all installed Autodesk Product Design Suite Premium 2013. One of us cannot see thumbnail previews in the file open dialog box or in the preview area of Windows explorer. She's using Windows 7, 64-bit.
View 9 Replies View RelatedHow / which system variable to change such that the Save List As dialog box don't appear every time I click on the publish button?
View 2 Replies View RelatedWhen you create your own template part file and change the "Initial View Extents" setting in Document Settings on the Modelling Tab. Does this affect the behavior of the initial view extents when re-opening a part file created from this template?
FYI - I recently created a new template part file so that the sketch gridline spacing was more relevant to the size of parts I create. I like to use gridlines while in sketch mode because it is a good visual indicator that I'm in sketch mode. On opening a new part file that referenced to my new template, I noticed that the initial view extents meant only a couple of gridlines were visible due to the zoom level. I therefore tweaked my template file by increasing the initial view extents by a factor of 4 (400mm x 200mm).
The problem now is when opening a part file created from this template, the zoom level seems to snap to the customised view extents and not to the physical extents of the part. Right clicking the View Cube and re-setting the "Fit to View" has no effect. This feature seems broken now that I use modified initial view extents.
unable to select an edge in the drawing view to create a general dimension.
View 1 Replies View RelatedWhen using the model documentation in autocad 2013 is it possible to select certain objects in a projected view and still have them show up in the base (parent) view? Another way to put it; can I isolate objects in one projected view only?
Is there a good place to go to read post from people that are using this new feature for production or some in-depth tutorials?
I had resized the File>Open dialog in Inventor. I had resized it so that it was quite large so I realized pretty quickly when I opened another file, that the window size had rest to its original size.
What I found was that if I export a parts list to excel, then go to File>Open, for some reason the size of my file>open dialog is cleared.
I have created a pipe network and am now creating an alignment and profile from that network. I follow the steps outlined in help file and when I get to "Select profile view origin" C3D freezes. I can invoke the Task Manager and choose to end C3D, then cancel when prompted to save file and control is returned. But no profile is created. Is it a video card issue maybe?
Seems like it is creating the alignment but freezes before the profile is created - In Prospector there are aligments in the misc category from multiple tries but no profiles associated with them. When it occurs I can't zoom or pan in C3D but I can switch to another app.
Civil 3D 2013 SP 1, 64 bit
Dell Precision T5600, 16 GB
Win 7 Professional 64 bit
Intel Xeon @ 2.0 GHz
NVIDIA Quadro 4000
When I first draw something on a model space and click the Layout1 tab to see paper space.
The default view port size (the red box) looks like the following.
But I want to maximize the view port size such that (for example) the dotted line to be the defualt view port size in the paper space.
Could I do this by code??
I am currently using ObjectARX 2007 in C#.
In the Inventor 2012 drawing environment when multiple objects were present I would pause the curser and use the wheel on the mouse to select the object and click the green check mark to dimension a part.
In Inventor 2013 the objects will scroll using the wheel but the green check mark don't show up. How can I select the correct object I want to dimension to?Has the behavior of the select other function changed in Invnetor 2013 or is this a bug?
I'm dimensioning to a mid point of a line that has a center line over it.
I am having trouble with my AutoCad Civil 2013. If I want to open or save an existing file the program only allows me to input the file name in the command line. It does not open a browsing window to select the file path I want to save or open to.
View 2 Replies View RelatedAutocad 2013 Data Extraction works if I do not include attached xrefs and set it to "Select objects in current drawing". When I check "Extract objects from xrefs"; and go to next it processes for a bit then stays on page 2 of 8 on the Define Data Source page. Also have the same error if I choose " Drawings/Sheet set" with or without the xref objects included.
View 3 Replies View RelatedI installed AutoCAD 2013 successfully, but when I open the program for the first time, it displays the following message and aborts the program:
FATAL ERROR: Unhandled Access Violation Reading 0xffffffff Exception at e9690004h.
What can I do to resolve this problem?
We are currently working on a big project which contains hundreds of drawings. We're using the sheet set & are very happy with with it. I have one question: How can you change the initial state of the sheet set manager. When I open my sheet set, some subsets are always expanded. I would like my sheet set to close all subset when I initially open the sheet set.
View 4 Replies View Related
