ACAD 2014: VIEWSECTION ->Select Parent View: what is it that you're actually supposed to be selecting? It clearly has to be in paper space. I assumed it was a viewport but when I select that I get the message "1 selected, 1 filtered" and nothing is selected.
View 7 RepliesI am trying to make section views from the parent view. I need to make several section view, but there is not enough room on one sheet for all of them. Is there a way to move or copy the section views to different sheets and keep the connection for when chages are made all views will update?
Using AutoCAD 2013
How can I get/edit the properties (height,..) of a drawing view created with 'viewsection' command?
View 2 Replies View RelatedIs it possible to have the parent view for the section in one drawing and the child views in another drawing?
View 2 Replies View RelatedThe Select Initial view checkbox in the standard file open dialogue has moved in 2013 from just above the File Name label to the file list window. Aside from the fact that it looks totally out of place design wise I find it obscures the file list. A way to revert to the previous behavior, or, even better, get rid of it all together because I never use it.
View 9 Replies View RelatedWhen using the model documentation in autocad 2013 is it possible to select certain objects in a projected view and still have them show up in the base (parent) view? Another way to put it; can I isolate objects in one projected view only?
Is there a good place to go to read post from people that are using this new feature for production or some in-depth tutorials?
I recently purchased AutoCAD Civil 3D 2013 and all of a sudden when I select "File", and "Open", the dialog box from which I am supposed to select a drawing file has a small "Initial View" box with a small check box to "Select Initial View". This box seems docked to the right side of the "Select File" dialog box but I am unable to select the check box. It seems to do nothing. Is this a glitch?
View 1 Replies View RelatedI have created a pipe network and am now creating an alignment and profile from that network. I follow the steps outlined in help file and when I get to "Select profile view origin" C3D freezes. I can invoke the Task Manager and choose to end C3D, then cancel when prompted to save file and control is returned. But no profile is created. Is it a video card issue maybe?
Seems like it is creating the alignment but freezes before the profile is created - In Prospector there are aligments in the misc category from multiple tries but no profiles associated with them. When it occurs I can't zoom or pan in C3D but I can switch to another app.
Civil 3D 2013 SP 1, 64 bit
Dell Precision T5600, 16 GB
Win 7 Professional 64 bit
Intel Xeon @ 2.0 GHz
NVIDIA Quadro 4000
I have a flat pattern with ordinate set dimension, taken detail from one end.
parent view having ordinate dimension from left end and i have taken detail view of right end.
i need detail view dimension with same origin dimension as like parent view.
How do you turn off the default check for "Propigate to parent view" when creating a breal in a drawing view. I have never had the need to use this option yet it is checked by defalt.
View 8 Replies View RelatedI create an IDW view of a subassembly by inserting the parent assembly, make it a non-associative view, then turn off visibility of unwanted subassemblies. When later working in the model and adding a part to one of the non-visable sub-assemblies, that part becomes visable in the IDW views in which the subassembly was non-visable, requiting me to edit all veiws in which the subassembly was non-visible. This can be quite a number of instances. Is there a way to prevent this?
I may have a more fundamental workflow problem: I create assemblies composed of subassemblies that need to be detailed sperately. I have found that in order to correctly create a structured BOM and to have the ballon lables to correspond to the structured BOM, I create the drawing views as described above. If I would just insert the subassembly to detail it, I don't understand how to get it to relate the balloon labels in the subassembly view to my master BOM.
I notice that if I use the CS6 feature of holding down the shift key while pickwhipping a new parent (to get the child to move to the parent), it deletes any keyframes I have set (position,scale,rotation). Is this normal behavior?
View 1 Replies View RelatedSay I have a keyword "parent" and a nested keyword (subtag) "child" under that keyword. Some photos are tagged with "parent", other are (only) tagged with "child".
Is it now possible to view all photos tagged "parent", but not see the "child" photos at the same time? Either using the keyword list or text filter, I always get to see the "child" photos also...
I know I can exclude certain keywords when searching (ie. "parent !child"), but in my case I'm having about 20 child tags, so it's not very practical to write all 20 keywords as exclusions.
I accidentally turned something on in Autocad, and I want it to go away, I have no idea what it's called or how to get it gone. It's akin to the "select other" window in Inventor when you select at the intersection of several objects.
How do I make this go away?
I have a sheet with views on it. For some reason I can't select one of the views. I can't activate it. And the view title is gone. I can go to the browser and find it under the sheet and then go to open.
View 1 Replies View RelatedI created 8 points (4 locations with 2 depths in each location) in the DWG of my AutoCAD Civil 3D 2013 project. I grouped these 8 points into 2 Point Groups: Point Group 1-high depth has Points #1, #3, #5, #7, and Point Group 2-low depth has #2, #4, #6, #8. I changed the 2D Wireframe to 3D Wireframe and on TOP view I saw Point Group 1 is on the top of Point Group 2 (because the 2 Point Groups have the same values of X- and Y-coordinates with different Z(elevation) value - see the first attached file. How can I change the TOP view to the TOP-FRONT view by using some Command to get this fixed TOP-Front view thar has the good separation of the 2 depths as shown in the second attached file?
View 7 Replies View RelatedI am trying to create a layout view using the view manager in paperspace. Whenever i click on define window, it does not record any information no matter where i click. If i do the same task in model space, it accepts the window i select. I am currently using civil 3d 2013 with the latest updates.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
i have a template, created a viewport and fit the model view in the layout space. However, when i scale the template... the viewport model doesn't follows the layout scale. Is there any ways to fit it so that when i scale the template i don't have to set the view again.
View 8 Replies View RelatedIs it possible to automatically insert centrelines in projected views when using the base view command?
I believe it is possible with Inventor.
Using Autocad 2014
I am trying to insert blocks into my drawings and for the most part I have been successful using Design Center. However, I have difficulties turning some of those blocks from the Plan View into the Elevation View, even when they show as elevation blocks. Even the downloads that show as 3-D end up being inserted as 2-D in plan view. In floor plan mode, I have no problem; so how do I turn them into 2-D in elevation mode?
View 1 Replies View RelatedIs there a way to have no view transition when changing views with the view cube? I'd prefer that it just switch to the desired view instantly with no transition.
View 3 Replies View RelatedWhen making a Section view from a Base View is there a setting to make the text follow the Text Style and Paperspace text size. Everytime I create a Section View I have to change the text settings in the Properties box.
View 3 Replies View RelatedI have a macro which
1) checks to see if the active document is a drawing
2) Checks that the drawing is of a part
I want to prompt the user to select a view on the drawing, if this is not the first view on then a warning message is displayed.
Then I want to take this active view and change all of the geometry lines and holes EXCEPT for bend lines to a specific layer.
I am trying to perform a sweep of a profile and I am unable to select the profile. I have a part with a plane through the part. I created a profile on this plane that I want to sweep along my path. However whenever I try to select the profile I am unable to, even when I sectioned the part to the created plane.
View 2 Replies View Relatedunable to select an edge in the drawing view to create a general dimension.
View 1 Replies View RelatedI am autocad 2010 user. I have drawing files from consultants with custom linetypes. I have deleted the. shx file but need to change line type. How do I select the relevant lines to convert to normal line type?
View 2 Replies View RelatedI've just installed Autocad 2013 and everything seems fine apart from that I cannot select my plotter, when i select it, it just goes back to "none". I've had a play around but nothing seems to work.
View 5 Replies View RelatedI have a lot of polylines that are all over a drawing from an outside source. Unfortunately the only unique properties about them are:
AREA = .14 sq in
PERIMETER = 1-11/32"
Everything is on the same layer, color by layer and are at the same elevation.
Any way to select just these closed polylnes? I tried quickselect but the AREA option did not work (it wouldn't except just the .14 value), and there is no apparent PERIMETER value to select.
I've just installed 2013 and everything is good apart from. When I start up AC it runs through it routine and then asks for "Select Shape File".
I can point it in the right direction, but this comes up at every boot up and I would like it to find it automatically and my old memory can't recall this happening with 2012 or before. I am using an old template file, does that matter?
I have used Autodesk products in the past, but I have never had this much trouble making a single wall. There are no scroll bars to move my view in the blue prints, keyboard arrows don't work, and there appears to be no way to change the cursor type so I can select and drag the viewing area. Is there some trick to it? When I drag the mouse it just highlights everything. This is especially annoying when I am just trying to change the orientation to see what is already made.
I am trying to begin with a very simple project: A deck. All I want to do is draw two original brick walls and then begin with a wood frame construction to place against it, but I also can't even seem to make a single right angle with this. When one wall length is finished it wants to position itself at 15 degre angles, but not in relation to the wall it is connected to. It sets those angles in relation to the compass direction which results in an inability to make even a single square. This means that even though the original wall I am building onto faces a South west 340 degree direction I pretty much have to disregard the presence of a compass and assume North is "top" which is pretty sloppy and makes me question why a compass is even present.
With a north orientation I can get right-angles without any problems, but the mouse is too sensitive and if I type in a length before clicking to create the wall the size ends up much longer than what I define. I can create it, select it, and then define the length, but I can't seem to define which side it expands from and I can't seem to find a toggle to keep a connected wall snapped in place or even to manually move that wall.
Also: When attempting to insert an opening into the wall at a specific point in the wall there appears to be no option to manually define (with text) it's position in that wall. There is a graphical method, but no matter where I put it on that wall it snaps to the far end. It's an existing wall with an existing opening.
I want to hide all layers through scripting. Firstly I have to select all layers for the same.
So, what is the command to select all layers?