When using the model documentation in autocad 2013 is it possible to select certain objects in a projected view and still have them show up in the base (parent) view? Another way to put it; can I isolate objects in one projected view only?
Is there a good place to go to read post from people that are using this new feature for production or some in-depth tutorials?
when i make a parent view from model space of 3d objects not all of them will appear in paper space. some times it will only display objects from one layer and other times it will pick and choose. this can also happen when i edit an object in paper space and when i return to paper space objects i was not even editing have disappeared from the view. note this does not always happen, in fact it does not always happen with the same objects.
It does not matter if i open and close AutoCAD the objects will still be gone. This has happened before SP1 but seems to be happening more since the release of it. i can provide a file.
In AutoCAD 2013 model documentation, how do you increase the resolution of shading so it more closely follows the linework? See example.
View 4 Replies View RelatedIs it possible to automatically insert centrelines in projected views when using the base view command?
I believe it is possible with Inventor.
Using Autocad 2014
My group and I are getting an infrequent but annoying problem with Model Documentation (MD) generated views in paperspace layout tabs. We all on autocad 2013, with sp1.1 installed on x64 machines.
We are seeing objects/ blocks showing in the MD views (viewbase created) in the layout that are no longer in model space. One common factor in this is that these objects seem to always be externally referenced (xref) files that have been either unloaded or completely detached (both cases purges preformed afterwards to wipe any remaining blocks made no difference). In this latest case the ghost objects show up twice (we needed 2 of the same xref) at what appears to be the correct old coordinates.
We have no work around for this and when this occurs we either have to revert to an older version from vault or create a new dwg, port all information over and recreate all views. The interesting thing about this problem is that if we revert to an older version from vault, the ghosts do not reappear/ reoccur at the same commands they appeared at previously.
I have set one station equation in my alignment and it displays correctly in horizontal view and in profile. But stations of projected objects after that equation are not correct in projected object label. It displays station values as it would be without station equation. If i manually insert profile view label for that point it is correct.
As you can see in attached image green station value (that one is label for projected points) is wrong because it does not take equation into calculation. How to make projected objects labels to consider station equation?
What type of objects can be projected into a profile view? I know that points, feature lines, and multiview blocks can be projected with variable results. I can't even find a simple list within Civil 3D's.
-Civil 3D 2012
Fred
-Civil 3D 2013 sp2
-Windows 7 64-bit
-Intel i7 Dual Core with 2.40 GHz
-8 GB of RAM
-AMD Radeon HD 6770M
-Civil 3D user since 2007
How do i rotate objects, plans...etc on model space in a view port.
View 9 Replies View RelatedI accidentally turned something on in Autocad, and I want it to go away, I have no idea what it's called or how to get it gone. It's akin to the "select other" window in Inventor when you select at the intersection of several objects.
How do I make this go away?
A user is having problems when using the copy command in AutoCAD 2013.
When they select objects, its not reporting on the commandline how many objects its found or keeping a running total of objects selected. Not even any duplications...
I've tested it on my machine but i cannot replicate the issue and have never come across this before!
Is it a bug? Is it a variable? User setting etc.
After upgrading to Inventor 2014 we notice that the graphics do not work properly, and that the overall performance in drawings and modelling bad compared to 2013. Then we installed SP1 and now drawing views are disappearing, however when we select "shaded" view the view reappears and works perfectly..
Any workaround regarding disappearing views?
I have a Crop View of a IAM and want/need a Projected View of the Crop View. When I select the Crop View as my base and then select try to create a Projected View, I get the whole IAM.
I guess one could use the Section View and eliminate all the items I don't need for my Base View.
IV2014 sp1.2 PDSU / Sim Mech 2014 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 331.82
SpacePilot Pro 3.17.1, 6.17.7, 4.11
unable to select an edge in the drawing view to create a general dimension.
View 1 Replies View RelatedI have a lot of polylines that are all over a drawing from an outside source. Unfortunately the only unique properties about them are:
AREA = .14 sq in
PERIMETER = 1-11/32"
Everything is on the same layer, color by layer and are at the same elevation.
Any way to select just these closed polylnes? I tried quickselect but the AREA option did not work (it wouldn't except just the .14 value), and there is no apparent PERIMETER value to select.
As the layout tabs I'd like to have a multiple model-views tabs.
I can use layouts tabs, I can change the background color to same as model tab and all its ok.
However I'm unable to set scale to have text and annotation with a "human" size (that is, thinking on my screen and not on the paper).
Maybe this is a newbie question but I'm lost....
What is what I must to set ? I dont want to use layout to print, but to view my drawing with custom layer settings.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Civil 3D (2013) how much you have to improve....
Is there a way in the command line to select certain objects. For instance if there is a cirlce a line and a square can i just select the circle using the command line. When i try to save as an STL file i can't find it anywhere. Does surfsculpt not work? Everytime i use it it says it failed. Also when i make an ellipse is there anywhere to specify the X Y and Z lenghts?
View 6 Replies View Relatedis it possible to get the start and end station of each projected objects?
see picture. what i am doing is based on the different colour. they are geotechnical requirement for the minimul fill depth. so i am thinking about making a program to put in a profile for me and then put horizontal curves. so don't need to do anything by hand. good starting point at least. save a lot of time and not really hard to code either.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
I have two objects that I would like to link together in model space. I realize this is easy to do using paper space but I am curious if this can be done in model space.
The two objects are wire connections but they are spaced far apart in my drawing and can be a pain trying to find thier locations all the time. if I could select or click the first connector and be able to pan or zoom to the appropriate connection by link or other means.
ACAD 2014: VIEWSECTION ->Select Parent View: what is it that you're actually supposed to be selecting? It clearly has to be in paper space. I assumed it was a viewport but when I select that I get the message "1 selected, 1 filtered" and nothing is selected.
View 7 Replies View RelatedThe Select Initial view checkbox in the standard file open dialogue has moved in 2013 from just above the File Name label to the file list window. Aside from the fact that it looks totally out of place design wise I find it obscures the file list. A way to revert to the previous behavior, or, even better, get rid of it all together because I never use it.
View 9 Replies View RelatedCIvil 3D 2013 / My drawing opens in layout view and all model objects are appropriately coloured by layer. If I hit plot at this point, my colour dependent .ctb file works fine. However, once I swtich to model view, all my linework turns white and if I switch back to Layout view it remains white and plots each line with the weight assigned to the colour white.
View 2 Replies View RelatedIt seems that there is a problem with the section view function in Inventor.
The projected section view is not ailgned with the base view.
I assume that the attached screenshot is very clear.
[URL]
Im currently trying to set up a 2 point perspective view of a model ive recently designed.
I have an image set as the background and i would like to align the model in perspective to the image.
My issue is Dview and free orbit and giving me any kind of reasonable perspective.
Is there any other methods i might be able to try to improve the results ?
I am working on a .dwg file in AutoCAD 2013 , and on one specific layer (defpoints), I am not able to select any of the objects. Initially, I thought that the layer may have been locked or frozen, but it is not. Additionally, I went ahead and locked then unlocked the layer as well as froze then thawed the layer, still not able to select any objects on the layer.
My next attempt to fix the problem was to run the command "AUDIT", and instructed to "Yes" fix any errors detected. The command seemed to execute correctly, however, it did not do anything. The objects on the layer still cannot be selected.
I was wanting to know if there is a way stop part of a projected object from displaying if it is to far away from an alignment profile cut to be of any use.
I know in Revit you can set the deep of view from the section line not sure if you can do anything like this in Civil3d.
We just installed AutoCAD 2013 migrating from AutoCAD 2010 so missed a few releases."Create View" seems like a great utility for detailing, but I was unable to get it to work. Is it something as obvious as only works with 3D models, or what?! Does special view window [parent view] have to be set up intially?
View 4 Replies View RelatedI have projected objects to multiple section views (ProjectObjectsToMultiSect) but now I want to remove them all. How do I remove all of the projected objects?
I can select an individual section view and go to the Projections tab in the Section View Properties and uncheck the projections, but how do I do this for all the views at once.
I recently purchased AutoCAD Civil 3D 2013 and all of a sudden when I select "File", and "Open", the dialog box from which I am supposed to select a drawing file has a small "Initial View" box with a small check box to "Select Initial View". This box seems docked to the right side of the "Select File" dialog box but I am unable to select the check box. It seems to do nothing. Is this a glitch?
View 1 Replies View RelatedI'm using Inventor 2012, and experiencing some trouble with certain types of projected geometry that I'm using in a sketch associated with a view in an .IDW file - but only when the view involves a break (or breaks).
I'm generating section views to show the layout of hole details at various axial locations along the part. When placing a section line, I can't "pick up" any appropriate locating geometry from the view. So, after creating the view (using just a vertical section line), I edit the sketch that defines the section line. Project some geometry (the edges of the holes, in the attached example), draw some additional geometry constrained to that, then constrain the section line to that. That works fine; if I move the view around, the section lines stay attached to it. This is what is shown in the attached "before break" picture.
When I apply a break to the drawing, though, the section lines don't follow the changing view. They stay right there, as if the view had not been broken at all. This is what's shown in the attached "after break" picture. Move the view around, and they track with it - but always staying the same "real" distance apart from each other. It is as if that projected geometry were completely ignoring the break.
I observe something similar if I start with an IDW view with one or more breaks, then create a sketch associated with the view. If I project geometry, some of it projects where it should, but other geometry projects elsewhere on the page - as if no breaks were present in the view.
The part I've shown here is something I put together as a simplified example of what I'm observing. The part I'm actually trying to detail is more complicated (many more details), and much longer (so breaks are a requirement to put it on paper).
unable to select objects after creating them in view port ..i am not able to select them in view port i can only select them either by SELECT ALL or from outliner or Hierarcy
View 2 Replies View RelatedUsing Autocad2013. Roughly two weeks ago we updated our company server. Since then, in the Sheet Set Manager, the 'Model View' tab is no longer in alphabetical order. The drawings are just randomly listed now, no order whatsoever.
View 2 Replies View Related