AutoCAD Civil 3D :: Get Start And End Station Of Each Projected Objects?
Sep 24, 2012
is it possible to get the start and end station of each projected objects?
see picture. what i am doing is based on the different colour. they are geotechnical requirement for the minimul fill depth. so i am thinking about making a program to put in a profile for me and then put horizontal curves. so don't need to do anything by hand. good starting point at least. save a lot of time and not really hard to code either.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
View 2 Replies
ADVERTISEMENT
Nov 25, 2011
I have set one station equation in my alignment and it displays correctly in horizontal view and in profile. But stations of projected objects after that equation are not correct in projected object label. It displays station values as it would be without station equation. If i manually insert profile view label for that point it is correct.
As you can see in attached image green station value (that one is label for projected points) is wrong because it does not take equation into calculation. How to make projected objects labels to consider station equation?
View 3 Replies
View Related
Feb 22, 2012
I can't seem to get my profile start and end station labels to appear even after I checked "Label start station" and "label end station" in the profile view properties.
View 2 Replies
View Related
Aug 31, 2012
I am working on road improvements, the City my client want to extend the improvement longer form the original scope of work. I am already completed the alignment and road profile centerline and the production plan is 100% completed.
What I need to do is to change and extend the alignment 750 feet backward from the original station (10+00). If I could explain correctly, I want to start the station @ 7+50 (backward from 10+00) and no changes on forward stationing.
What is the best way without doing re-creating alignment.
View 3 Replies
View Related
Mar 8, 2012
How and where can I adjust the station precision of the view frame start and end station. I am choosing snap to nearest foot station but I am getting 1+00.00. I would like 1+00 in the label. I am setting to start end to the layout name and mapping that to the current drawing field in SSM and do not have precision control there either.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
View 7 Replies
View Related
Jun 19, 2012
I have projected objects to multiple section views (ProjectObjectsToMultiSect) but now I want to remove them all. How do I remove all of the projected objects?
I can select an individual section view and go to the Projections tab in the Section View Properties and uncheck the projections, but how do I do this for all the views at once.
View 1 Replies
View Related
Dec 13, 2012
What type of objects can be projected into a profile view? I know that points, feature lines, and multiview blocks can be projected with variable results. I can't even find a simple list within Civil 3D's.
-Civil 3D 2012
Fred
-Civil 3D 2013 sp2
-Windows 7 64-bit
-Intel i7 Dual Core with 2.40 GHz
-8 GB of RAM
-AMD Radeon HD 6770M
-Civil 3D user since 2007
View 9 Replies
View Related
Oct 5, 2012
This is using Civil 3D 2012 Service Pack 2.1
When a Station Equation is added to an alignment it causes all of the profile views to get messed up. In addition once the EG profile changes the entire FG profile may also need to be changed. See this video I uploaded to Youtube that fully explains and shows the problem: [URL] ........
So, any way to some how lock the profile views start and end stations? Or to some how lock the PVI locations on a a proposed profile to certain stations?
View 2 Replies
View Related
Mar 13, 2012
I have a feature line, and a labels table created for it. The table has the following columns: Line or Curve #, Station, Segment Start X, Segment Start Y, Segment Start X, Bearing/Delta, Length, Radius, Grade Ahead.
what code I need for the table to display the station of the feature line at the start of the segment?
I also have an alignment with the same stationing over top of the feature line, but Im not sure how to code a reference text into the table either. I can create an end segment reference text for the plan view labels but even if I copy that code into the labels table it doesn't work.
View 4 Replies
View Related
Feb 1, 2011
I'm still bouncing back and forth from 2008 LDD and 2010 3D.
I can't seem to find inquiry station offset objects or something like inverse to line.
Do have to create alignments for these simple calculations.
View 5 Replies
View Related
Aug 1, 2012
When using the model documentation in autocad 2013 is it possible to select certain objects in a projected view and still have them show up in the base (parent) view? Another way to put it; can I isolate objects in one projected view only?
Is there a good place to go to read post from people that are using this new feature for production or some in-depth tutorials?
View 1 Replies
View Related
Oct 16, 2012
I am using C3D 2012 and the feature "Project Objects into Multi. Section Views". The question I have is when I project a 3D tree block into the section it appears in the x-section in plan view only. How can I get the tree block to appear in the section in elevation view.
View 3 Replies
View Related
Jul 4, 2012
I was wanting to know if there is a way stop part of a projected object from displaying if it is to far away from an alignment profile cut to be of any use.
I know in Revit you can set the deep of view from the section line not sure if you can do anything like this in Civil3d.
View 3 Replies
View Related
Dec 12, 2012
I would like to bring in some of our linework into WS so it can be viewed on an iPad or smartphone with the GPS location referenced to the linework. Our dwg files projection is set for the NAD83 California Coordinate System, Zone 6, US survey feet.
Does the line work need to be projected before uploading to WS to use the GPS correctly? I understand there is also a units issue...but for some reason the location is never where it should be.
View 2 Replies
View Related
Oct 31, 2012
C3D 2012 SP2.1 on Win7-64
I have a marker on a cross section that was projected from a short feature line that I created from a 3DPolyline. If I move the cross section (they never come in correctly, right?), the feature line moves too. If I use a 3Dpoly, this doesn't happen. Only went to the feature line because for some reason, when I went to Project Multiple, the 3Dpolys weren't picked up.
Now I wondering if I've moved feature lines on other projects where I have moved the sections. Could be a real problem. Most of those, though, had a mix of feature lines and 3Dpolys, so they would only be partially messed up! Hopefully, I moved the sections before doing the projection.
View 2 Replies
View Related
Sep 21, 2011
C3D2011
Say you have a feature line in plan view and you project it to profile view. Is there a way to label the true slope of the projected feature line segments in profile?
The profile view depth labels are not accurate since it's simply calculating the length from station to station in profile.
...and of course this does not correspond to the true segment length since the feature line is not parallel to the alignment.
View 9 Replies
View Related
May 4, 2012
All I want is to manually add a station in between to other stations.... ie I can produce this-->
However I would prefer to produce this -->
Which has an additional station added as required from time to time.
View 3 Replies
View Related
Oct 22, 2012
Within my road corridor, I have one section where the excavated material cannot be used as fill elsewhere. I see a place where I can specify a factor for reusable volume when I compute earthwork materials. But it looks like I can only use 1 factor for the whole corridor. Is there a way to say from Sta XX+XX to Sta XX+XX the reusable fill factor is 0, but the rest of the project it is something else?
All I can think to do is copy the quantity report to Excel and manually change the reusable volume in that station range to 0. But, since the report comes in as just numbers (no formulas), I then have to enter all the formulas to recalculate the volumes.
View 1 Replies
View Related
Mar 28, 2012
First - the alignment station label text size when viewed in model space is fine but when viewed in paper space it comes in way to big. How do i adjust this so i see things in paper space as they are in the model?
Second - Would like to adjust the station label style from the defalt 0+00.00 to 0+000.000
View 3 Replies
View Related
Nov 21, 2012
When an alignment needs to have stationing modified, what is the best process for this when a proposed grade line and corridor have been established? I know the proposed grade line can be edited via edit profile geometry>profile grid view.
But what from I have found each station has to be modified individually, which is cumbersome. I would hope to be able to modify the proposed grade line by changing only the beginning station and the rest would update, similar to the alignment.
C3D 2011, (latest updates)
Win 7 Pro, 64-bit
16 GB RAM
View 8 Replies
View Related
Sep 5, 2013
I have a problem with some station labels I have, when I open the drawing(s) the labels display ??? instead of the station. After I manually sync the alignment in prospector, the drawing switches to the model tab with the ? now showing correctly.
View 2 Replies
View Related
Jan 15, 2013
Like entering a station and going there?I've used the 'SO with Zoom C. That is not simple.12+ miles of a single road alignment with 3 equation stations makes for a LOT of panning.
View 4 Replies
View Related
Oct 30, 2012
Im trying to make a label that will call out pipe replacement in reference to an alignment. I know how to call out from multiple alignments, but I need multiple stations from the same alignment, such as sta xxx to sta xxx.
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
View 8 Replies
View Related
Aug 13, 2012
I have an alignment that starts at station 1+00 and runs through 20+00.
By right clicking the station labels and editing the label group, I have updated my major station increments to 200' and my minor stations (ticks only) to 100'. The problem is, I want the 200' increments to begin at my starting station (1+00), so that the labels would read 1+00, 3+00, 5+00, etc.
As it is now, the above settings make my labels read: 1+00, 2+00, 4+00, 6+00, etc.
View 5 Replies
View Related
Aug 8, 2013
I have a station equation in my alignment that happens to fall in a vertical curve in my profile. I'm using the PVC and PVT station and elevations from the plans and the K value to draw a Fixed Vertical Curve. It doesn't seem to be taking into consideration the station equation. It is calculating the wrong PVI station and elevation.
View 8 Replies
View Related
Jul 20, 2012
I'm trying to figure out the best way to split an alignment so that I do not disturb the stationing of the alignment beyond a station equation. I have a very long alignment with a finaized design. I have a design change to make, which means I need to move a section of the alignment, and I want to do it without changing the stationing past a defined point so that it does not affect the design (corridor) past that point.
View 7 Replies
View Related
Jan 7, 2013
I currently have a drawing with a road alignment and stationing. Is there a way to automatically station and offset a point that is not on the alignment line?
For instance, our alignment line is the centerline of the road. I need a station and offset of the new right of way line points at different places in the drawing. I want to use the alignment stationing to have it automatically create the station and offset at the point I choose.
View 4 Replies
View Related
May 29, 2013
When I am in the file with the labels everything is the proper size. When I reference this file into my sheet file everything becomes tiny. Any legitimate solution?
View 9 Replies
View Related
Jan 13, 2013
After editing an alignment in my drawing the stationing did not update to the new edited alignment. I tried selecting the alignment and in alignment properties changing the end stationing, but I get the error "Either outside alignment limits or within gap created by a station equation". The stationing stops at my first edit point 66+24 when the total length of edited alignment is 103+15. Is there a way to re-station alignment.
View 3 Replies
View Related
Aug 2, 2012
Can't seem to figure out the correct style menu to access in order to turn the pink circles that represent (I believe) the station markers OFF when I go to view my corridors in object viewer or section editor...
View 1 Replies
View Related
Nov 5, 2012
New to civil 3d...I have a series of bore locations along an alignment that I need the station offset and distance. I tried POINT -> ALIGNMENT: STATION/OFFSET, and that prompts me to tell where i want the offsets to go. I want to be able to pick the center of each bore and have civil 3d tell me that information. What command do I use?
View 4 Replies
View Related
