I am having trouble with my AutoCad Civil 2013. If I want to open or save an existing file the program only allows me to input the file name in the command line. It does not open a browsing window to select the file path I want to save or open to.
View 2 RepliesI have autocad civil 3d 2008 in my pc. From last 2 days I got a different problem i.e. when I am selecting open / save command from File menu graphical file select explorer is not opening just message in the command window . Previously I used to select files using graphical file explorer.
View 6 Replies View RelatedWhen I choose Open Drawing and the window pops up, it would be nice if the full path name of the file showed up on the bar where it shows the file name (see attachment). As it is I can't tell if this file is on my c drive or my back-up drive.
The individual drawings show the full path name once they're open, can the same be achieved with the Open Drawing window?
When I turn on my compagny computer everything is alright. Photoshop CS6 13.0 x32 start correctly. I can work on picture as expected.But during the day, Photoshop doesn't want to open other file (any other file).I can continue to work on a picture that still open and can save it, but I can not open anything else.
Restart Photoshop doesn't work. I must reboot the computer to correct this and open other file.I'm on windows 7 SP1 with administrator rights..No plugin installed.
I have a Parasolid file that opens in Inventor 2012 but not in Inventor 2013.In 2013 i only have a blank screen.I have zipped the file.
View 1 Replies View RelatedAs soon as I click the drop down the screen shows as blank and the program freezes. This happens with all the following commands, Save AS, Insert.
I have checked the FILEDIA and it is set to 1
I seem to have the problem with all autocad products on my Windows 8 pro desktop. I have tried Autocad LT 2013 & 2014.
system info: win8 64bit, autocad 2013 64 bit,
if open autocad program first, every thing is fine , ribboon is working good. but if derictly open a .dwg file when autocad is not running, the ribbon panel is gone, i tried every method i can find -- reinstall, repair install, type "ribbon" command, reset cui, swich to other worksapce then swich back--- but the ribbon just don't come back.
Windows Explorer set to open image files with PSE11, but when I double click on image in WE it launches PSE11, but I then need to click on Open tab in PSE11 to get it into work window. PSE10 did not have this problem
View 1 Replies View Relatedif i try and to open a new file or save as a current file, the windows box does not open. the command line does populate asking for file name, etc, but obviously is very tedious to navigate windows folders with a command line!
any obvious changes that would prevent windows folder dialogue box not to open?
I have recently build a frame structure using the frame generator. Now i wish to change some beams to other positions which is fairly easy. The only problem i have is when I click on the insert frame button the selection window does not appear. the function does work but it is like working in the dark
How to open the insert frame window manually?
I used Inventor 2010, but after a change of our Domain, I had some issues with export and mouse customization (one worked with IV running privileged, but the other didn't and vice versa). Reinstalation didnt solve the problem, so I hoped, that a newer version would solve it. Unfortunately the problems remained the same, but I could get it to work (running mouse software also privileged).
Now I noticed, that the 'select other' menu doesn't pop up, regardless of the delay choosen in the settings. Also some function keys don't work: F7, F8, and F9 don't show any reaction, while all other F-keys work.I'm using Inventor Professional 2013, 64 Bit (Build : 200, Release 2013 SP2 Update 2) from our Education Master Suite.
I have a VBA macro that is using at some point a full path in order to get data from an Excel file. I am changing the data from the original file to the file that is localized in the full address. Now I want to use a Browse button and generate the Save As Window to capture the data directly from source file.
Is there a piece of code that open the Save As window that I need and return the full path so I can use it in my original code? I am sending a word document with a picture that shows the window that I want to call
I've just upgraded to Windows 8.1. Well it seemed better than Windows 8 for the first few minutes. Then I discovered Autocad won't open. (Microsoft claim it's compatible - obviously I checked their Compatibility Center first).
I have Autocad LT 2013 version 19.0.55.0. I have done a full uninstall and reinstall of the application and service packs. There is no error message, the loading screen and status messages appear as normal, and then just before opening everything disappears.
I was wondering if there was an option to set Inventor to display the full file path for the current file open ? At present I am only seeing a short description of the name of the active file - I wish to see it's full file path similar to what AutoCAD displays.
Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
When opening a drawing that turns out to already be open by someone else, the "Open as read-only" warning isn't showing up for one of our users. This is becoming confusing and in the end someone's change will not take. Is there a setting that may be turned off?
View 9 Replies View RelatedI received files in 2010 format which I converted to 2007 using true view.Now when I open in 2013 I get a message "file needs recovery" I recover and save. when I open again I get the same message in 2013.
View 3 Replies View RelatedI recently purchased AutoCAD Civil 3D 2013 and all of a sudden when I select "File", and "Open", the dialog box from which I am supposed to select a drawing file has a small "Initial View" box with a small check box to "Select Initial View". This box seems docked to the right side of the "Select File" dialog box but I am unable to select the check box. It seems to do nothing. Is this a glitch?
View 1 Replies View RelatedThe file autocad 2010 (dwg) that I've been working for ages doesn't open. It starts loading but then get stuk on 96%. I tried to recover it and no errors are detected.
View 9 Replies View RelatedI installed photoshop and it worked fine but after restarting my computer it wont open and gives me the "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item" The only way i have got on photoshop since is on safe mode or by completely reinstalling photoshop until i restart my computer again. Is there anything wrong, I don't know if AVG is blocking something or what.
View 47 Replies View RelatedI really like the addition of the "recent places" feature in cs5 as browsing between folders, saving and opening new images has been a headache.
I would like to be able to set a specific folder that "Save As" opens. Often I am forced to continue to brows away from a folder that I do not want to save to and navigate back to the folder i need.
I have ACA 2013 (student version) running in the Windows 8 environment. I cannot open anything drawn in a previous release nor can I open a drawing created in ACA 2013 that was installed on the Windows 7 platform.
I have tried to drag in the drawings through design center. That worked for a while now when I try that it causes ACA to crash. Also I have tried multiple drawings that were created in several different versions of ACA. (2004, 2006 and 2009)
As a side note I was able to open those files in ACA 2013 running on the Windows 7 OS.
When I want to open my inventor files on windows explore or my computer window then i click double on file (ipt, iam, idw) then my files opening in different inventor program windows.
I mean i have a open innetor window and i want to see in single inventor program window when i click double on file. But now always opening new inventor applications. Then i lost time and memory.I have Windows 7 (64 bit) and Autodak inventor 2012.
I am trying to write a standard scrpit file for a data extraction using -EATTEXT. I plan for others to use this script file on different computers, so I will not be able to put in a full file path; it will need to remain relative. Unfortunately, AutoCAD will not recognize a relative file path entered into the command line for -EATTEXT.
View 2 Replies View Relatedin the file browser (import) , the .psd file will have a 'multi' indicator, which i can double click to expand/collapse the layer. The problem the process is quite slow, and when i expand it , sometime double clicking is not working because i got slow response.
View 2 Replies View RelatedI've just installed 2013 and everything is good apart from. When I start up AC it runs through it routine and then asks for "Select Shape File".
I can point it in the right direction, but this comes up at every boot up and I would like it to find it automatically and my old memory can't recall this happening with 2012 or before. I am using an old template file, does that matter?
I got a problem to open a dxf file. If I use command method then I can easily do that. But I want to open that file by clicking a button from my windows form. I did the coding for that specified button like below:
Private Sub Button6_Click(sender As System.Object, e As System.EventArgs) Handles Button6.Click
Dim strFileName AsString
LoadDXF.InitialDirectory = "C:"
LoadDXF.Title = "Open DXF File"
[Code] ......
After invoke that button I got a error like below:
How can I open the drawing without commandFlags.session? I want to use the button of my form to open that dxf file.
Looking for a reference that shows what the default file path locations are for various AutoCAD user files. Specifically, I had my AutoCAD file paths changed and cannot find where my blocks are saved. I'd like to save the blocks I create in a specific folder.
View 9 Replies View Relatedlike in AutoCAD there is REMEMBERFOLDERS can u tell me if i use syntax with getfiled and i want the path to be remember next time what should i do or what syntax i use for that.
View 1 Replies View RelatedI need to convert a Cad file into a PDF file. Unfortunately, the PDF file won't print. The first time I had this problem was I converted it with the layers on the PDF file. What I did last time was this:
-I went under Plot-Model
-Under the Printer/plotter, I clicked DWG to PDF.pc3 and click on Properties
-Click under the Device and Document Settings tab
-Click on Custom Properties
-Click on Custom Properties buttom
-Under the DWG to PDF PRoperties table, I click on Capture all under Fon Handling
-I uncheck Include Layer information under Additonal Output Setting
-I click ok
When I begin to plot under Batch Plot, I also went and click on Publish Options, and on that table under Layer information, I click on Don't include.
For some reason, it's not printing the way as it should. I don't know what other option I have in order the print corretly.
I have been changing setting in the Options dialog box for many years but have never made any changes directly to the "Working Support File Search Path" because these update automatically to reflect changes i make in the "Support File Search Path."
What is the purpose of these "Working" settings?
so i recently started taking an architect autocad class. our first project was nothing special but for some reason whenever i save it on my removeable usb after working on it at home, it wont open on the schools computer. it doesnt open as the specific file i wanted, but instead it opens up a blank file named drawing1.dwg. the file name does not even come up at the top of the screen.
View 4 Replies View Related