Currently have an iLogic rule in my drawing template that base on user input brings up the Drawing View dialog box (as though you click on base view). I want to know if there is some coding I can do to control or handle what happens if the user clicks the cancel command inside this dialog box. Possibly show a message box. Or even run another rule after the cancel button has been clicked?
View 1 RepliesI am trying to piece together some code for an ilogic rule. This rule should look for a drawing view that is a flat pattern, if it finds one it should change the object layer to our "CNC" layer.
View 3 Replies View RelatedI need import all new params, rules and forms from a new template to older parts. I'm trying to use an external rule to create a new iproperties and import params from xml file but I can't assign these parameters with these iproperties.
I attach the code.
I've created a main assembly containing several ipart components. With the following rule I can read the model parameters, but not the user parameters of the iparts:
A = Parameter("Part1:1", "d0")
If I create a component, insert it in the main assembly and make it an ipart afterwards, the user parameters can be read out with ilogic. But if I insert the same ipart again, the user parameters can not be read out anymore. Model parameters are no problem.
I want to change 'mutil value select" to "custom value input" in ilogic user parameters. something like this:
if condition A then
multivalue.setlist("length", 1,2,3,4,5)
else
(users can enter any value they want, how can i remove the list first and set it to custom value input?)
I have a rule setup for drawings. I need the rule to first determine if the there is a flat pattern view present. In other words, if there is no flat patter view, I want to the rule to stop.
I am very green to ilogic and VB. Running Inventor 2013.
Is there a way to convert an Inventor 2012 view scale from "0.5" to "1:2" or similar within an iLogic rule? I can extract the main view scale and plug it into a variable but the format isn't correct for the drawings I'm creating.
View 2 Replies View RelatedI would like a few rules to be triggered once the new drawing template is opened.select sheet size, I have been given a rule that already works, basically the rule selects a border and title block based on sheet size selection.
trigger = iTrigger0iLogicForm.Show("BorderChange", FormMode.Modal)iLogicVb.UpdateWhenDone = TrueIf Parameter("BorderSize") = "A0" Then ActiveSheet.ChangeSize("A0", MoveBorderItems := True)ActiveSheet.TitleBlock = "MJTD A0"ActiveSheet.Border = "MJTD A0.
[code]....
I would also like a rule to let me annotate in metric or imperial. this is where I require assistance. I am not sure the best way to achieve this rule. My programming is very basic.I have found some links here, but I can't seem to make them work in the drawing environment. Also these rules seems to change the units of an already created .ipt.
Rule #1 Link
Rule #2 Link
I am just looking for a rule to select either .in or mm from the styles library(i think) , before I even place a base view. Regardless of the original units used to make the model.
Is there a way to invoke the iLogic Rule Editor and pass it an existing rule name or external rule for editing?
View 4 Replies View RelatedI need a way to run a rule which is saved in my top-level assembly using iLogic rule which is saved in a part file in the parent assembly.
I have even tried using an external rule in a txt file, but that gives the error "Component: This function can only be used in an assembly." - which makes no sense to me. I hope I am just missing something simple. I cant believe with all its other strengths, that iLogic would be so limited in that regard. Why is there not simply a snippet under the 'Run Other' that allows you to specify an assembly file and the rule name? (like there is for running a rule in a component from the assembly)
I want to simply set a custom iproperty as the Description in each part file within my assembly. I can do this easily at part level with ilogic but I want to be able to run the rule from the assembly level and all the parts run the rule. I am struggling to find a way to do this.
I think this may be the best method I have found but I think it must be far easier?
[URL].......
I am working for customer with a simple item with his iLogic design. He has created a simple form to modify his iProperties. To modify the current material, a multi-value parameter was created and the following rule as a local rule;
"MultiValue.List("MATLIST") = iProperties.Materials
iProperties.Material = MATLIST"
He is now trying to make this an external rule but gets the following error
Error in rule: Mat2, in document: Mat2.iLogicVb
iProperties.Material: is probably a bad material name.
The more info tab says:
System.ArgumentException: iProperties.Material: is probably a bad material name.
at iLogic.CadPropertiesInRule.SetDocMaterial(Document doc, String matName)
at LmiRuleScript.Main()
at Autodesk.iLogic.Exec.AppDomExec.ExecRuleInAssembly(Assembly assem)
at iLogic.RuleEvalContainer.ExecRuleEval(String execRule)
I am using Ilogic to complete details in the drawing iproperties to use in a drawing border.
I can successfully enter the creation date with the line:- iProperties.Value("Project", "Creation Date") = Now
But is there a way of doing the same so that the iProperties.Value("Summary", "Author") = computer user ?
how can I close an iLogic Form from either an iLogic Rule, or a VBA Rule (VBA is the Preferred method)?
View 5 Replies View RelatedIs it possible to rotate a drawing view using iLogic?
View 2 Replies View RelatedLike the title says I am looking to place views (and dimensions) on drawings using ilogic. I am new to both inventor and ilogic, most of my training came in SolidWorks. It needs to pull the part from an ipart that pulls the information from an excel file.
View 1 Replies View RelatedIs there a line of code that will look at a drawing view and turn shading on?
I have tried
ActiveSheet.View("VIEW1").View.Shaded = True
but it didn't work .
I have successfully been able to rotate the drawing view. rotating the view label.
View 1 Replies View RelatedIs there a way that we can set the view label in the style library to show custom/user Properties?
We have set our iam/ipt templates to have some custom properties which we wish to display in the view label when the view is created however there this no way to add these properties to the label.
I find this a little strange as you can add these user Properties to the parts list in the style library? (I've added some screen caps to show what I am talking about)
what i am trying to do is create an iLogic rule that if your drawing view scale is set to the following ...
1:1, 1:2, 1:4, 1:8, 1:12, 1:!6, 1:24, 1:32, 1:48, etc. on the view label for that view it will diplay ...
SCALE: 1/2" = 1'-0"
and so on for the rest for the standard scale factors.
i know it will be some sort of a loop and it needs to check all views when ran for any changes.
i have never done any coding for the drawing side of inventor yet only model coding
is there any way using iLogic or other method to automatically control the size of the 'break' in a drawing view? I have built a model which uses iLogic to control virtually everything, however the large variations in the length of the product mean that there are some interesting results when it comes to the broken drawing views updating.
it would be nice to locate the break at the absolute center of the view and then size it as a percentage of the view size along one axis or perhaps according to some other length based rule.
Dell Precision M6400 - C2D 2.66 / 8gb / Quadro FX3700M / Win 7 Pro x64
I'm trying to do this with iLogic, and i'm not getting anywhere. What I need, is to be able get to the iProperties of an associated model that is referenced into a drawing file. I want to make it easier to update the iProperties from the drawing file, without having to open the model file.
Factory Design Suite Ultimate 2012
AutoCAD 2012 | Inventor Professional 2012 | Vault Professional 2012
I want to create a rule that will warn the user when the plate thickness they are using is not standard. I have already created a multivalue parameter for plate thickness, which lists all standard steel plate thickness's and also allows for custom values.
I was hoping I could create a rule that would prompt a dialogue box warning when the user creates a custom value for plate thickness.
I know this can be done, but like I said, Im bloody useless with iLogic and find it hard to come across relevent examples and/or tutorials online.
I'm currently using this rule for easy PDF making
SaveLoc = "C:Temp"FileName = ThisDoc.FileName(False)Revnr = " rev_" & iProperties.Value("Project", "Revision Number")PDFnaam = SaveLoc & FileName & RevnrThisDoc.Document.SaveAs(PDFnaam & (".pdf") , True)MessageBox.Show("PDF is aangemaakt in C:Temp", "Document creation",MessageBoxButtons.OK,MessageBoxIcon.Information)
The problem with this is that i want to save without lineweight? is there anyway to do this with this code?
I have an ilogic rule with multiple Subs. How could I run one specific sub contained in that rule from an iLogic form or another rule?
View 2 Replies View Relatedi have an iLogic rule in serveral files. Now this rule has to be deleted. This should be done with VBA. I can not find any function to delete a rule using VBA.
I found a function iLogicAuto.RunRuleDirect(rule), but not iLogicAuto.DeleteRule(rule) ...
I can not find any documentation for iLogic/VBA.
I have an iPart which includes iLogic Rule. When I change iPart by table, iLogic Rules are not triggered.
In iLogic Utilities, there is a button "Rules Triggered by Events", If I use "Any Model Parameter Change", the update need long time, looks like Inventor is "No Response". I like the way "Material Change", but I need "part Number" change to trigger the rules. How can I do it? I tried other events as After Open, Before Save, etc, they are does not work.
I've caught glimpses of how to do this (For instance, this plugin (Inventor LinkParameters) [URL]...... when trying to actually find information on any documentation of how to get from point A to point B. I can't seem to find anything about ilogic automation / rule creation / ilogic in general, in the object browser at all.
I know code like this exists
Option ExplicitSub RuniLogicRule()Dim iLogicAuto As ObjectSet iLogicAuto = GetiLogicAddin(ThisApplication)If (iLogicAuto Is Nothing) Then Exit SubDim doc As DocumentSet doc = ThisApplication.ActiveDocumentDim ruleName As StringruleName = "Rule0"Dim rule As ObjectSet rule = iLogicAuto.GetRule(doc, "Rule0")If (rule Is Nothing) Then Call MsgBox("No rule named " & ruleName & " was found in the [code].......
(and even fixed the error it gave me due to the original code leaving something out) , but any info on the GetRule method is.
Is there any way to create a rule to create a substitute on my weldment files?
what I need is something like:
If this document file type is weldment then create shrinkwrap substitute, go to the file (substitute) read the custom iproperty "area" and write to this document custom iproperty "area for sand-blasting" activate LOD Master then delete substitute LOD.
The propose is for purchase department to know the area of the assembly (only the area of visible surfaces).
Is there any command/option to add a keyboard shortcut for ilogic rule?
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
When i trying to create a new ilogic rule i get window with this error:
Spoiler (Highlight to read)System.InvalidCastException: Невозможно выполнить приведение [A]iLogic.CodeSnippets к [B]iLogic.CodeSnippets. Источником типа A является "Autodesk.iLogic, Version=17.0.13800.0, Culture=neutral, PublicKeyToken=null" в контексте "Default" в расположении "C:PROGRA~1AutodeskINVENT~1BinAutodesk.iLogic.dll". Источником типа B является "Autodesk.iLogic, Version=17.0.13800.0, Culture=neutral, PublicKeyToken=null" в контексте "LoadFrom" в расположении
[code]..........