AutoCAD 2013 :: Data Extraction With Xref - Select Objects In Current Drawing

Dec 6, 2012

Autocad 2013 Data Extraction works if I do not include attached xrefs and set it to "Select objects in current drawing". When I check "Extract objects from xrefs"; and go to next it processes for a bit then stays on page 2 of 8 on the Define Data Source page. Also have the same error if I choose " Drawings/Sheet set" with or without the xref objects included.

View 3 Replies


ADVERTISEMENT

AutoCAD 2013 :: Use Data Extraction To Create Chart In Drawing

Dec 5, 2012

I was trying to use data extraction to create a table that can list the blocks in the drawing and descriptions in AutoCad 2012 windows version. the software didn't recognize my blocks. When I starts trying at my mac version of 2013, I am even more confused on how the create a table that can list the blocks in my drawing.

View 2 Replies View Related

AutoCad :: Attribute Extraction Doesn't Refer To Current Drawing?

May 7, 2012

I'm trying to automate an attribute extraction in the form of a table. I create the .dxe file but when I use this template file with -eattext (or -dataextraction), in a drawing different than the one the .dxe was created in, I still get the original table and not the one with the attribute values of the curent drawing.

View 4 Replies View Related

AutoCAD 2013 :: Data Extraction To Create A BOM

Dec 26, 2012

Here is what I would like to accomplish:

1. Construct a blank "template" drawing that already has a pre-determined data extraction table set up with every piece of valueable data that may or may not be used in the drawing showing values of zero (because there is nothing drawn yet of course)

2. The data extraction table is linked to an excel file. This excel sheet will recieve data from the linked CAD data extraction table and use the data in the pre-determined 'destination' cells to execute cost economics equations

3. I would like the data extraction table to be set up with all possible entities that may potentially get drawn into the drawing - I don't know if this is possible because in any data extraction table I have ever drawn, as soon as the entity the data table is accounting for is deleted from the drawing, the whole line from the table dissappears - in my case I would love for it to just show "zero" or null

4. The reason for all of this is to not have to create a new data extraction table and excel sheet every time - The two templates would already be linked, and all the drafter would do is draw the drawing, the appropriate data would show up in the data extraction table (eg. X amount of feet of poly line, X number of Y block), be pushed to the excel sheet in predetermined locations, cells would be linked on the sheet to execute costing equations. 

I hope i have been clear enough that the project represented in the drawing does not have many possible components and that is why having them all listed in a pre-designed data extraction table would not take up much space, the benifit of having everything linked before hand is the goal.

View 5 Replies View Related

AutoCAD 2013 :: Geometrical Data Extraction From 3D Object

May 28, 2013

I wish to extract geometrical data from autocad 3d object (mostly poligons), like length, height and width. I can see them in the property of a single object, but when I want to extract them into a table or into an external file, I can't find them.

View 5 Replies View Related

AutoCAD LT :: Can Data Extraction Wizard Be Added To 2013

Nov 28, 2012

Can the Data Extraction Wizard be added to 2013LT?

View 2 Replies View Related

AutoCAD 2013 :: Automate The Data Extraction (date And Time)?

Jan 14, 2013

I have a need to run a data extraction every night at lets say 2am and have it save to a .csv file. 

View 3 Replies View Related

AutoCAD 2013 :: Embed Data In Table So That User Can Select From Group Of Data Within One Cell?

Oct 24, 2013

Is it possible to embedd data in a table so that a user can select from a group of data within one cell?

I use this technique quite often in Excel.  One cell in a table can have various values: A, B, C, or D.  While another cell can have a different set of values to choose from:  BLUE, RED, ORANGE, or PURPLE.  The user can pull down an arrow (similar to a dynamic block) and choose from a set list of values.

View 2 Replies View Related

AutoCAD Civil 3D :: Change Data Reference Path In Current Drawing

Jul 12, 2012

i have this drawing which i created data reference to the wrong project in the wrong coordinate system and worked off that. then now i am trying to correct it. so i copied the dtm and did coordinate transformation and got that right. now the model drawing is still linked to the original dtm from the other project folder.

if i remember right back in 2007 version there was a completely built in shortcut editor which allows you to change the path in current drawing. now it's all greyed out. there is no access. so is there a way to bypass this? probably pretty common thing to do. say you want to try different version of the same object to try your design just swap it back and forth.

They should make a right click button on the data shorts in current drawing and says "browse data reference" not show up when only broken reference occurs.

one way i can think off now is copy the files to local. disable network drive, then let it broken reference show up then browse to desktop one then delete desktop one and hopefully it get the broken reference again and not look for the very original one. i think it's probably gonna do that, there is some "hidden" thing stored in the object to point to the original path which not available to users.

Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710

View 2 Replies View Related

AutoCAD 2013 :: Select Other Window When Select At Intersection Of Several Objects

Sep 5, 2013

I accidentally turned something on in Autocad, and I want it to go away, I have no idea what it's called or how to get it gone.  It's akin to the "select other" window in Inventor when you select at the intersection of several objects.

How do I make this go away?

View 2 Replies View Related

AutoCad :: Performing Data Extraction And Linking To External Data With Formulas

Apr 19, 2012

I am trying to link my extracted data from blocks with attributes to an extenal source so that the table I create and place into the drawing already has the formulas I need to due the required calculations. But every time I create and place the table the formulas are not in the table. I include the columes that contain the data but it doesn't seem to be working.

View 2 Replies View Related

AutoCad 2D :: Unable To Fill Objects With Any Sort Of Hatch In Current Drawing

Jun 29, 2013

I am unable to fill objects with any sort of hatch in my current drawing. Other drawings are fine, but in this one, nothing will hatch, either form the tool palettes option or from the hatch menu.

View 7 Replies View Related

AutoCAD 2013 :: Select Objects Not Showing How Many Objects Found

May 2, 2013

A user is having problems when using the copy command in AutoCAD 2013.

When they select objects, its not reporting on the commandline how many objects its found or keeping a running total of objects selected. Not even any duplications...

I've tested it on my machine but i cannot replicate the issue and have never come across this before!

Is it a bug? Is it a variable? User setting etc.

View 9 Replies View Related

AutoCAD Civil 3D :: 2013 Viewframes Not Showing Up Via Xref Or Data Ref

Apr 11, 2013

Running 2013 SP 1, HF3. 

So I made viewframes in my base file which I then xrefed my base file into my sheet file.  In my sheet file, the viewframes are no where to be seen.  The layer is on, set to plot, has an off color so I know I should see them.

Also if I data reference them in they again do NOT show up.  But I can do a Zoom to and I end up at 0,0. 

View 1 Replies View Related

AutoCAD Architecture :: XRef Objects Not Showing In Drawing

Dec 11, 2013

I have a drawing done in AutoCAD Architecture 2013.  Most of it is just lines, but I have a couple of Walls with Doors.  It looks fine in the base drawing but when I xref into another file the walls revert to their original color and the doors have disappeared.  The opening is there but no door.

I tried xredit and the doors are there but when I close that they are gone again.  Tried detaching and reattaching...still have the problem.

After I posted this tried Display Configuration.  Clicking all options for Doors gives me the doors...in a closed position, not the same as in the base plan.

View 1 Replies View Related

AutoCAD .NET :: How To Create Collection Of Xref Objects Into New Drawing File

Oct 12, 2012

idsObjEntity-->collection of xref objects
private void CloneObjectIds(ObjectIdCollection idsObjEntity, String strFileName)
{
try
{
Database dbNew = new Database(true, false);
Autodesk.AutoCAD.DatabaseServices.TransactionManager tm = dbNew.TransactionManager;
[code].........                 

here i take the object id collection as xref filter by its layer name.i tried to clone the object in new dwg its shows Wrong database.

View 1 Replies View Related

AutoCad :: Change All Of Objects Colors In Xref Drawing To Grey

Dec 29, 2011

My goal is to change all of the objects colors in an xref drawing to gray to use as a background to my work. All changes to the xref drawing were made in the drawing itself, none of this was done in the base drawing.

The quickest way I could find was to change set by layer mode to color only and use set by layer to change all of the objects (select all). This seemed to work fine, until I noticed that certain text would move slightly when the color changed. Long story short this text (single line) moves slightly when the color is changed, even if I select one text and change the color in its properties.

My question is why would text move or change in some way when you only change the color. It doesn't seem to happen to mtext, only dtext.

View 2 Replies View Related

AutoCAD 2013 :: Current Layer - Every Object Or Line Selected In Drawing Appear On It

Jan 16, 2013

When I set a layer as current, every object or line I select in the drawing appear to be on that layer in the toolbar. Although in the properties toolbox, I see that the line I selected is still on the right layer.

I can't work in paperspace either, when I freeze a layer it freezes all objects. It seems like whenever I give a different layer to an object, it attributes to all object that same layer.

When I open the same drawing in acad 2008, everything is ok, the objects have the proper layers.

Is there a command for that or it's an acad 2013 problem?

View 9 Replies View Related

AutoCad :: Select Certain Objects Within Drawing And Label

Apr 25, 2012

I've created my drawing but now I need to select certain objects within the drawing & label them as a certain layer.

View 3 Replies View Related

AutoCad :: Using BL:NAME During Data Extraction

Mar 19, 2013

Ive setup some blocks which have attributes and have been successfully using a template to extract the data for a while. I just created a new block and tried extracting the data. All works fine except for BL:NAME returns '*U' instead of the block name. The block is called 'SM'. Is '*U' a code for something?

The old blocks still export fine.

View 4 Replies View Related

AutoCAD 2013 :: Select Multiple Objects

Sep 10, 2013

I have a lot of polylines that are all over a drawing from an outside source. Unfortunately the only unique properties about them are:

AREA = .14 sq in
PERIMETER = 1-11/32"

Everything is on the same layer, color by layer and are at the same elevation.

Any way to select just these closed polylnes? I tried quickselect but the AREA option did not work (it wouldn't except just the .14 value), and there is no apparent PERIMETER value to select.

View 3 Replies View Related

AutoCAD 2013 :: Unreferenced Xref When 2012 Drawing Open

Oct 29, 2012

Just got the upgrade from 2012 to 2013 AutoCAD. When I opened the file from 2012 to 2013 for editing, my sub-xref  file become "Unreferenced". The main Xref is loaded and fine. I tried to reload it but it doesn't work, and only its text path that are shown in there. It seems that the sub-xref  file is in the right path when I trying to verify it location. So, what I did was use my old 2010 Autocad to finish my task which work fine. Why my sub-xref is in "unreference"condition using 2013 AutoCAD.?

View 2 Replies View Related

AutoCad :: Print PDF To Current Plot Settings In Current Drawing Directory

Sep 29, 2011

Is there a macro/script/deisel that will automatically print a pdf (cute pdf autocad lt 2007) to current plot settings in current drawing directory and give it the current drawing view name and number? Disk space not a problem these days and would save time to have a pdf copy of all drawing tabs readily stored in the directory ready for issue.

View 3 Replies View Related

AutoCad :: Dimension Value (data Extraction)?

Jul 22, 2011

what should i Select in data Extr wizard to get the readings of series dimension on one layer preferably

View 0 Replies View Related

AutoCAD .NET :: Data Extraction To Table

Apr 7, 2013

I am working on a co-ordinate utility that utilises data extractions. I am able to extract the data that I want to an XML file, but how do I create a dxe file and link it to a table? I have found the WizardSettings has a table style, but that is as far as I have reached.My code is below.

using Autodesk.AutoCAD.ApplicationServices;using Autodesk.AutoCAD.DatabaseServices;using Autodesk.AutoCAD.DataExtraction;using System.Collections.Generic;using System.Data;using System.IO;using AcApp = Autodesk.AutoCAD.ApplicationServices.Application;namespace acmCoordinates { public class DataExtraction { const string outputXmlFile = @"c:empdata-extract.xml"; public static void.
[code]....

View 2 Replies View Related

AutoCad :: Use Of Data Extraction Tool

Oct 16, 2012

If I use the data extraction tool in Express tools or go down the path of ATTEXT I can get an extraction result that includes block handle data. If I use the data extraction wizard I can't recover this handle data.

Is there a reason for this and can the data extraction (.DXE) template file be tweaked to accomplish this?

View 0 Replies View Related

AutoCad :: Data Extraction Tables

Sep 18, 2013

Here at the office we use a template I created using Data Extraction. After creating the table and inserting it, it works just fine. Then, if you make changes to the door or window you can click the "Download Changes From Source File" and it will update the table ... However, after saving it and trying to work on it the next day, it somehow unlinks the table I have in my drawing and I cannot "Download Changes From Source File" to update the table ... I checked under XREF and it shows it is loaded and I have it reading from the same path I saved it. I would like to know if there is a way to re-link the table to the .dxe file or how to prevent from it un-linking new tables?

View 0 Replies View Related

AutoCAD 2013 :: Command Line To Select Certain Objects?

Oct 12, 2012

Is there a way in the command line to select certain objects. For instance if there is a cirlce a line and a square can i just select the circle using the command line. When i try to save as an STL file i can't find it anywhere. Does surfsculpt not work? Everytime i use it it says it failed. Also when i make an ellipse is there anywhere to specify the X Y and Z lenghts?

View 6 Replies View Related

AutoCAD 2010 :: Data Extraction DXE File

Feb 3, 2010

I am creating a schedule with a .dxe file, which extracts data from attributes into a schedule. Is there a way to link this file so it is a "relative path" instead of a full path. IE: The .dxe file is liked to the same folder that contains the current drawing, not linked to my C:/AutoCad drawings/Job Name/folder2... I really want to be able to move the drawing and .dxe to a different folder and not have the link broken.

View 4 Replies View Related

AutoCad :: 2010 / Data Extraction To Excel?

Sep 21, 2011

Seems like i export the data of thickness, diameter, lenght and mass to excel via dataextraction, but if i change something in the drawing, its not updated in the excel file..

I also wanted to export the data to an already existing part list template, but this seems impossible...

View 2 Replies View Related

AutoCad 2D :: Data Extraction Not Sorting Properly?

Nov 21, 2013

I'm doing a data extraction with a block with attributes. When I extract the data, it sort like the image below. I want it to sort 1,2,3,4,5,etc...

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved