When I first draw something on a model space and click the Layout1 tab to see paper space.
The default view port size (the red box) looks like the following.
But I want to maximize the view port size such that (for example) the dotted line to be the defualt view port size in the paper space.
Could I do this by code??
I am currently using ObjectARX 2007 in C#.
I have a drawing in model space the i drew to scale of 1'=1' and I went to paper scape to put the drawing in my title block using Viewports. highlighted the viewport and went to properties to give the drawing a scale so it would maximize the Viewport area, on my 22"x34" paper. but under the standard scale 1/64"=1' is too big and 1/128"=1' is too small. the simple solution is zoom extents but then in my title block i have to put NTS. I would like to add to the standard scale or be able to set the customer scale to a whole number. EX. 1:1000 or 1:150, etc. etc.
View 3 Replies View RelatedWe have a problem with the view port freeze. When we feeze a layer in the modelspace of a viewport and save the drawing, on re-opening the drawing we find that the layer that was switched off has been switched back on i.e. the saved mechanism does not work.
We have tried copying a view port that works from another drawing into this drawing by that did not work. We have also compared setttings with the drawing that works and the drawing that does not work. But there was no joy.
We think the problem is with the drawing and need a solution preferably with the settings of the drawing. having to redrawing the whole drawing.
I have a drawing with some 3d objects that I display with multiple viewports, in paper space, showing different views of the objects. The viewports themselves are all on one layer that is frozen. Each viewport with a 3d object is set with Visual style: Hidden & Shade plot: 3D Hidden, to hide all lines that should not display for that view and creating a nice clean image in each viewport.
Again, viewport layer is frozen so no viewport borders are displayed. The problem I'm having is that I get random viewport border lines that show up on my plot. It can be paper or pdf. and could be top in one viewport and side in another, etc. I have never had this happen before but it seems to be related to hiding 3d line because I have never had a problem when I didn't.
Setting the scale in a view port in paper space? 2010
View 3 Replies View RelatedI'm trying to limit the activity inside a paper space's view port. Specifically text and dimension objects (our routines) as these layers inside the view port may be frozen.
How do I pragmatically get out of the view port back into paper space?
Command: _.PSPACECommand: cvportEnter new value for CVPORT <1>:Command: _.MSPACECommand: cvportEnter new value for CVPORT <2>: 1Cannot set CVPORT to that value.*Invalid*
When I use a layout size such as A3 in paper space, the section view label text size is the same as it is in model space (when both annotative scales are the same). However, when I choose 11x17 as a layout size, the section view label text size is exetremly small.
View 2 Replies View Relateda Villa Drawing I want give a Bath room Detail, so i want off this villa drawing with out bath room. if i have any modification in this bath room automatically changed the bath room detail drawing in model space not for layout using view port... ,if anypossible in model space, what i choose the part only shown ..
View 3 Replies View RelatedHow do i rotate objects, plans...etc on model space in a view port.
View 9 Replies View RelatedACAD 2010 text doesn't view the same in MSpace and PSpace! Model space is the acad default text: txt Paper Space it appears as it should as Romans. The drawings print as txt and not as it should Romans! When I change the text in model space to Romans, save the drawing, enter PSpace and the return to MSpace, it seems to 'reset' back to text!
This is specific to my workstation BTW, when I open the dwg file on a colleagues PC it opens Romans in both Model and Paper space.
CAD-Newbie working in paper space zoomed in close. I want to return to page extents but am zoomed in so close I can't click outside paper space to move view control toolbar to model space. is there a simple key command to perform this function?
View 9 Replies View RelatedI created a xref. this xref included some poly line. width is 0.2mm. i need this poly line line weight should be change from different view port. right now this is shown in narrow line width. how can change this line weight at view port?
View 4 Replies View RelatedI have used the following code in a small app to create named views: LINK_TO_Autodesk_Help_Topic
However...A user of mine tried running the command while in a paper space layout. It appears the view still gets created but only within Model Space.
The help DOES SAY that "a default model space view is created", but how would I specify that I want the view to be created within the "current" layout, either Model or Paper space?
I tried setting the .OwnerID property of the ViewTableRecord to "doc.CurrentSpaceID" but that did not work - no error either.
I have a site survey that I am having rotation issues with.
In the model space the drawing is rotated so when I draw a vertical line it points up (which is what I am used to). However in the paper space, the drawing is automatically rotated so that north is now pointing up, and if I attempt to draw a normal vertical line as i did in the model space the line now points NE.
How can I rotate the view of the viewport in paper space so that my lines as vertical and horizontal. This would not be such an issue if it was just a plan, but I have drawn sections that just look ridiculous.
A problem we are having in our office on 1 computer is that this message appears in the command line
'viewport is view locked switching to paper space'
It happens whenever we zoom or pan into one of our locked viewports. We have purposefully locked the viewport so we don't lose the scale when we zoom or pan and want to leave it this way, however, whenever we zoom or pan this message appears and it takes 30 seconds before the screen readjusts to the zoom or pan we require.
how can i rotate a drawing view in model space and paper space? UCS -> new -> 3 point -> and saving the view works, but trying to figure out how to do this with paper space now. My purpose if for pulling construction lines from plans, for elevations. In the past I simply rotated the drawing, but if i had a layer turned off it would mess up their positioning.
View 1 Replies View RelatedI have wall section sheets that are best viewed in portrait mode, but use the same landscape page setup as the other sheets in the set. So the viewports for the sections are rotated 90 degrees and difficult to read on the screen. Is it possible to rotate the paper space UCS and rotate the paper space "view" to match the UCS, like you can in model space?
I don't want to rotate the viewports and title blocks themselves & set up a portrait page setup. This is because I'm using Acrobat's PDF maker for batch plotting and not using the same page setup for each sheet makes one click, fire-and-forget publishing impossible. And I don't want to use DWG-to-PDF because it doesn't have any configurable image compression settings that I know of.
If it's not possible, then it's not the end of the world. We have AutoCAD Architecture and AutoCAD LT 2012 & 2013.
I'm having a problem with labeling points in Civil 3D 2012.The drawing was originally received in Imperial form from another CAD software.I work in meters or millimeters. Millimeters in this drawing.
I've made them very tiny in Model space but they still end up huge in Layout.
I have a 3D drawing in model space which I want to print with different views. I know how to make viewports for top orthographic view, side, front and 3D perspective view, but I can't figure out how to make a sectional view viewport from the 3D drawing as well.
Also, I can't figure out how to have autocad place hidden lines and centerlines for me.
Just got the new 2013 version and I'm having this strange problem:
When I open a drawing (that was last saved in Paper Space) and I'm switching to Model Space, my view is not set to "Top" by default. How can I set my view by default to "Top"?
View of when I'm switching from Paper to Model Space:
"Top" View, what I'm supose to view by default...:
When I change a dimension in one viewport the alphabetical text size in another viewport enlarges automatically (not the numerals) yet when I look at the properties it still says the right size. How can I stop this from happening?
View 7 Replies View RelatedThe model space orientation is different than the paper space orientation (I have my viewport rotated) but whenever I am working in paper space and double-click inside model space to activate the viewport, it resets/reorients the view to match the orientation in model space. It also changes the scale. If I lock the viewport and then double-click inside to activate model space it does not change.
I don't want to always have my viewports locked to work on them in paper space.
We like to allow user to select a rectagular area in modal scpace. Then the code creates a paperscace viewport in a spcified layout. The viewport will show the selected area. find the old VBA code that achived this and the .net code I am trying with. .Net code always gives some exception.
VBA Code
'Lets find the center of the viewport in paperspace.
Dim center(0 To 2) As Double
center(0) = newWidth / 2
center(1) = newLength / 2
center(2) = 0
Dim lay As AcadLayout
For Each ent In ThisDrawing.layouts
[code].....
How does one accurately rotate the view so that view in paper space is parallel and perpendicular to the border sheet without guessing the angle?
View 3 Replies View Relateda)) I have a simple drawing attached with color outlines.How do i fill in the shapes with color.The blue outline filled in Blue and the red outline filled in Red
b)) How do i set the drawing space so as it fits to a A4 size paper?
Is there any way to change the paper space(layout) background color?I do not mean the sheet color, but the rest of the space.
View 3 Replies View RelatedHow I would change both the model and paper space thickness of a line in AutoCAD 2004? I've tried changing "line thickness" and "line weight" in the properties dialog box but it doesn't seem to matter whether it's 0 or 9,999,999 or any number, it just looks the same, in both the model space and paper space views.
I have a drawing someone else did that uses polylines of different thickness so I have tried to figure out how they did it. Again, looking at the properties dialog box it seems to make no difference what I set the "line thickness" or "line weight" properties to...the line just stays the same size regardless.
I want to change line thicknesses because I'm designing a surface water pipe layout...I want the pipes to be a lot thicker than the lines that represent the actual building so that they will stand out when I plot the drawing.
Can I change the LTSCALE in paper space and in model space interchangeably?
I am struggling with the batt insulation big time. I get it looking perfect in paper space and then I go to model space and move a piece of batt insulation and then when I go back to paper space the LTSCALE of the batt insulation has changed. It's really weird. Batt insulation is killing me. I set the LTSCALE globally as well as each individual batt insulation but it keeps changing without me messign with the LTSCALE. Killing... Me...
I have a pipe network that I am showing in a drainage plan. I want to show the Structure table in paper space. It seems I can only creaate the table in model spcae. I'm ok with that. I made a viewport in my paper space tab to see the table but it keps scaling to full size regardless of what the viewport scale is set to. The table is too big to fit in my drawing. I tried making a smaller viewport but the table keeps scaling to be actuall paper size. How can i get it to stop scaling so I can shrink it to fit on my sheet?
If Civil3D can't do it can I export the tbale to a data linked Spread Sheet then import that (and link it) to my paper space tab so that I can control the size of the table?
I have trouble to find the maximum work space for A4 paper size when I want 1:1 measurements on A4 paper. The stuff I draw must keep the 1:1 measurements
I want to go maximum .
Is there a way to change a specific attribute in a block found over x-amount of papers pace tabs?
At current I can only change one tab at a time.