AutoCAD Inventor :: 2013 Moved Open Drawing Command?
Jun 1, 2012
I don't understand why the right click - open drawing command had to be put in a submenu. Is there a way to customize the commands on these right click menus other than the marking menu? I don't really like the marking menu, and I don't want to put it there. There was nothing wrong with where it was... There are so many commands in the basic right click menu that a good majority of inventor users don't use. At least give us the ability to customize this.
View 9 Replies
ADVERTISEMENT
Dec 26, 2012
I have drawings (some with more than one sheet) from inventor 10. Now I like to open it in inventor 2013. The first sheet is showing, but I can't open the other sheets. I can print them, but I can see a listing of it or go to the sheet.
FYI, until December 2012 I worked in Inventor 10, now I have inventor 2013, so everything is new to me.
View 9 Replies
View Related
Dec 13, 2013
Is there a way to incude the sheet number that a drawing view has been moved to? I have an elevation tag that shows the view identifier, I am looking to have the sheet number referenced where I show "Field Text-Manual" in the attachments below. I am using inventor 2014.
View 1 Replies
View Related
Jan 10, 2013
I am having a problem with AutoCad 2013 crashing. While running the program when I use the open command dialog box if I re-name a file, create a folder, or copy a file autocad goes unresponsive and crashes immediately afterward. I have installed the service pack and update my video card driver trying to fix the problem. I used to be able to perform everything mentioned above in AutoCad 2010 without any problems. I don't think its my computer causing the problem because everyone else in my office is having the same issue with 2013.
View 5 Replies
View Related
Oct 22, 2012
I have a drawing that was drawn in 3D CAD and I need to convert to 2D CAD. I changed the view, but I cannot remember what the command is I need to type in to change to 2D.
View 3 Replies
View Related
Oct 1, 2013
I am running Autocad 2014 on a Windows 7 machine. Everytime a use the open command Autocad appears to freeze. I can clear the freeze by hitting the escape key. The only way I can open drawing files is to use windows explorer and click on the file I want to open.
View 7 Replies
View Related
Feb 25, 2013
I'm trying to find out how to assign to a toolbar button the open command for a specific drawing.
The code I input at the cui is ^C^COPEN;"//server/subpath1/subpath2/legend.DWG";
The answer I get is
Command: OPEN
Command: //server/subpath1/subpath2/legend.DWG "
Unknown command "DWG"". Press F1 for help.
View 9 Replies
View Related
Nov 19, 2013
I am using the ALIGN command to overlay two groups of blocks, I'm then using some VBA code to export the coordinates of the blocks to an excel sheet to make comparisons.
The issue I'm having is when I use the ALIGN command the coordinates exported are different to those in the drawing (but only for those moved using the ALIGN command).
I don't get this issue when I use the move, rotate and mirror commands, only ALIGN. What may be causing this?
View 2 Replies
View Related
May 1, 2012
[URL] ......
Floating command line width gets shorter and shorter everytime you open up AutoCAD? Civil 3D is real bad, I used it to shoot the above video. In regular AutoCAD, it still shrinks, but it shrinks a lot less.
Any tips for keeping it floating but making the width stay constant?
View 7 Replies
View Related
Apr 16, 2013
I've seen this happen with a couple of the previous releases, but not for some time. After the CLOSE command is issued, the drawing graphics remain displayed but no AutoCAD specific keyboard or mouse input is accepted. More of an annoyance, I guess, as Control + O will then allow opening of another drawing file. This just started today for no apparent reason after using 2014 for the past week or so. Prior to this happening, my workstation locked up completely while trying to close a CAD file and Task Manager wouldn't take any input.
Win 7 with Service Pack 1, 64-bit
16 GB Ram
Intel Core i5 CPU
View 3 Replies
View Related
Apr 9, 2013
when i try to copy drawing,''copyclip unkown command' showed up, what should i do
View 1 Replies
View Related
Nov 6, 2011
I am going to collect objectid's of the moved items in drawing after they moved to destination. So I wrote an event to monitor move command , by using object modified event handler. when I run below code for every entity it collects 2 object id. One before move and one after move. Is there any way to just collect object ids after they moved?
Class EVENTS
Dim MyDwg As Document = Application.DocumentManager.MdiActiveDocument
Dim Myed As Editor = MyDwg.Editor
Dim Mydb As Database = MyDwg.Database
Dim Myobjidcoll As ObjectIdCollection
[Code]....
View 3 Replies
View Related
Feb 22, 2013
I'm in AutoCAD 2013. I've been working on a drawing everyday (was just working on it yesterday), but can't open it now. I just get a blank gray screen when I open if from within AutoCAD. When I open it from my computer drive while AutoCAD is closed, AutoCAD opens and I get "Drawing1.dwg." I've tried the RECOVER command, but I don't get a response. I tried RECOVERALL command which let me choose a file to recover, but it responded saying it could not recover the drawing.
View 6 Replies
View Related
Aug 13, 2013
Is there a program available to convert newer Autocad files to older versions? I have a 2012 file that I want to read in 2008.
View 2 Replies
View Related
Nov 19, 2013
A colleague was working on a drawing yesterday in AutoCAD 2013 when it crashed. Since then the drawing has refused to open in AutoCAD 2013. It also does not open Trueview. It will however open in previous version of AutoCAD. We tried to export it to .dxf as well but they are corrupt. We also tried to attach it to a new drawing as an Xref and as a block, both were met with an instant fatal error and the closure of AutoCAD.
We have tried auditing, purging, resaving, using backs-ups. None of them will open in AutoCAD 2013 any more. The drawing closes without attempting to open with no error messages. It just loads up the default drawing(x).dwg.
View 9 Replies
View Related
Apr 26, 2013
When opening a drawing that turns out to already be open by someone else, the "Open as read-only" warning isn't showing up for one of our users. This is becoming confusing and in the end someone's change will not take. Is there a setting that may be turned off?
View 9 Replies
View Related
Oct 29, 2012
Just got the upgrade from 2012 to 2013 AutoCAD. When I opened the file from 2012 to 2013 for editing, my sub-xref file become "Unreferenced". The main Xref is loaded and fine. I tried to reload it but it doesn't work, and only its text path that are shown in there. It seems that the sub-xref file is in the right path when I trying to verify it location. So, what I did was use my old 2010 Autocad to finish my task which work fine. Why my sub-xref is in "unreference"condition using 2013 AutoCAD.?
View 2 Replies
View Related
Jul 8, 2010
If we can access the Auto Balloon Command using Inventor Drawing API.
View 6 Replies
View Related
Mar 27, 2013
Weird behavior: the dimensions are moved incorrectly,In the attached dwg (and screenshots), as the drawing is moved, then the dimensions are moved but incorrectly. I’m not sure concerning the sort of settings that influence them to behave like this.
View 5 Replies
View Related
Jun 28, 2012
I recently purchased AutoCAD Civil 3D 2013 and all of a sudden when I select "File", and "Open", the dialog box from which I am supposed to select a drawing file has a small "Initial View" box with a small check box to "Select Initial View". This box seems docked to the right side of the "Select File" dialog box but I am unable to select the check box. It seems to do nothing. Is this a glitch?
View 1 Replies
View Related
May 10, 2013
How to resolve the issue of : Displayed drawing keeps on vibrating everytime the cursor is move.
View 5 Replies
View Related
Oct 22, 2013
I do my 3D modeling by use of simple cylinders,boxes and everything looks fine. but when I re-open the file just minutes later lots of objects has moved. See attachment. The attached picture shows a highlighted cylinder that is BOTH highlighted inside the module (where it is supposed to be) and on the outside where it has moved.
This happens all the time and I have to move the objects back in position. The distance the objects are moved is random. I use 'acadiso3D' template for these models
View 7 Replies
View Related
Jun 1, 2012
I use Autocad since version 2.0. My THUMBSAVE value is 1.Still not showing a preview of the dwg.
View 9 Replies
View Related
Oct 5, 2012
I have a data set including .shx .shp .prj and .dbf files each named the same for landuse, rail, road, etc for a single city. How can I open these files to export a simple line drawing for use in a thesis project as a map.
View 4 Replies
View Related
May 2, 2013
When copying a symbol (control c) then pasting (control v) I can move the symbol to another location and left click to drop it. Many times when I do this the symbol disappears and you can't see it. If I re (regen) the the entire model disappears. I can close out the drawing then open it back up the drawing has been restored and the symbol will be at the location that I had placed it at. With the same drawing, I don't have these problems with 2012.
View 1 Replies
View Related
Jan 4, 2014
After installing the VBA Module, I get the message "Unknown command "VBARUN"". I've rebooted, restarted and tried reinstalling the VBA Module to no avail.
View 4 Replies
View Related
May 15, 2012
I press CTRL+9 to make the Command Line disappear while drawing. When I plot (or when doing a plot preview) , the Command Line appears again by itself. So I always have to turn the Command Line off manually after each plot
The bug still happens;
- if Dynamic Input is turned off or on
- if I plot to a real device or in PDF
- if the Cammand Line Palette i docked or floating.
This is not an issue in AutoCAD 2012 so I guess it has to do with the new way they programmed the revamped Command Line palette in 2013.
Using Windows7
View 2 Replies
View Related
Feb 15, 2013
I'm running LR2 (I know, first step, UPGRADE!), but in the meantime, I had to move my catalog because my drive got full. Under the Backup dialog box I chose the new location. But when I just click on the LR icon to open the program it opens with the default C: drive catalog location that it first installed with. Then I open the specific catalog from in the program and relaunch it. I have LR set to bring the dialog box everytime I start LR since I don't use it everyday. So I back it up when the dialog comes up and when it's done it goes right back to the default catalog with none of my library in there. Why do I have to keep opening the catalog manually?
View 7 Replies
View Related
Dec 7, 2011
When I try to open this drawing I get this error "Internal error in persistence operation (Can't load segment PmBRepSegment via a RSeRef when loading segment DLSheet35DLSegment)".
Is there a recover command in Inventor 2012 similar to the recover feature in Autocad?
View 2 Replies
View Related
Feb 5, 2012
I just installed my Photoshop CS Version 8 into Windows 7 on a new PC. When the program is opened, the File Browser icon does not toggle, and I have to go to File menu to open Browse.
The browser window now cannot be moved, maximized, or closed. The same applies to any image that is opened. Notwithstanding, all the functions of Photoshop are working OK. Since Adobe no longer supports this version
View 6 Replies
View Related
Aug 18, 2013
I have a Canon 6D and recently purchased Lightroom 4.4 so that I could open my Canon RAW files. They do open in Lightroom, but when I move them to PHotoshop CS4 I can't open the files. I get a message telling me I can't open them.
View 6 Replies
View Related