AutoCAD 2013 :: 3D Objects Have Been Moved When Reopening File?
Oct 22, 2013
I do my 3D modeling by use of simple cylinders,boxes and everything looks fine. but when I re-open the file just minutes later lots of objects has moved. See attachment. The attached picture shows a highlighted cylinder that is BOTH highlighted inside the module (where it is supposed to be) and on the outside where it has moved.
This happens all the time and I have to move the objects back in position. The distance the objects are moved is random. I use 'acadiso3D' template for these models
View 7 Replies
ADVERTISEMENT
Nov 5, 2013
I've been working on this project for so long and today when i saved the 3d model, created with autocad architecture 2014,and reopened it, the walls , slabs, doors all changed into lines, but the 3d solids remained the same....i 've attached a photo what happened to my model.
Capture.jpg
View 4 Replies
View Related
Mar 5, 2013
I set a viewport to a perspective mode. I do this by starting 3DOrbit then right clicking and choosing perspective. Save, close, open and all perspecitve views are set to parallel projection.
View 9 Replies
View Related
Mar 12, 2013
Was working on a small project for college yesterday and now when i try to reopen the document a good chunk of the frame i constructed yesterday is missing.
The sketches are still there though the extrusions are missing.
View 9 Replies
View Related
Mar 28, 2011
Had a client request a schematic but for the hardware of a schematic to be represented with JPEGs of the component.Having a bizarre one where I've re-opened a DWG which had about 15 JPEGs in (which were copied from pictures off of the net) and the images aren't appearing when re-opening the file. I've just got a blank space with a boundary with drag points.
When I double click on where the image is supposed to be I got the 'Image Adjust' properties box and a space where the image is supposed to be in the box and all it says is 'Image File Unsupported.'
I'm fearing having the 'ball ache' of having to obtain the images again, and cropping them and resizing them and wasting a load of time on them which I haven't got to spear.
View 9 Replies
View Related
Dec 8, 2011
Somehow the objects of my dynamic block have moved away from the original basepoint.
I can't simply edit the block and move all the objects back to 0,0 because then I have to re-do all the stretch commands since the stretch windows don't move.
I have a basepoint parameter but it doesn't seem to be working.
View 4 Replies
View Related
Nov 6, 2011
I am going to collect objectid's of the moved items in drawing after they moved to destination. So I wrote an event to monitor move command , by using object modified event handler. when I run below code for every entity it collects 2 object id. One before move and one after move. Is there any way to just collect object ids after they moved?
Class EVENTS
Dim MyDwg As Document = Application.DocumentManager.MdiActiveDocument
Dim Myed As Editor = MyDwg.Editor
Dim Mydb As Database = MyDwg.Database
Dim Myobjidcoll As ObjectIdCollection
[Code]....
View 3 Replies
View Related
Nov 8, 2013
I've created a series of images utilizing symbols.
Basically the images are of a box. Each side of the box has different content.
I create the side content flat with an encompassing rectangle. Drag all this to the Symbol Panel to create a symbol (no 9-slice no align to grid set). I then take a symbol instance and use Object > Envelope Distort > Apply with Mesh - 1 row, 1 column and proceed to transform the symbol into position on the packaging.
This works.
I can easily double-click the symbol and edit the side of the package with no problem. Exit symbol editing mode and the symbol instance(s) update. Perfect.
Until.....
I close the file. Return to it 12-18 hours later and open it to see that visually my symbols are no longer positioned correctly. I click, the symbol/emvelope is still in the correct position, but the preview on screen shows no transformation. This incorrect visual appearnce translates to print and save for web as well. So it's more than simply an inaccurate preview. The symbol has actually broken out of its container incorrectly.
To explain further.
When I save the file it looks like this:
The grey box indicates the symbol/envelope bounding area.
When I reopen the file the next day it looks like this:
The symbol/envelope is still in the correct position but the symbol contents are completely incorrect. There seems no way to reset the symbol other than to delete what's there and redo the transformations.
There is nothing overly complicated about the artwork within the symbol. It's all text or line art, no effects or transformations within the symbol itself.
View 9 Replies
View Related
May 3, 2013
Every time I re-open a file containing a 3D object placed in the document, if I do a minor change (texture, color or position) the 3d object jump to his imported place in the document and lost the position and direction I placed it.
View 2 Replies
View Related
Mar 27, 2013
Weird behavior: the dimensions are moved incorrectly,In the attached dwg (and screenshots), as the drawing is moved, then the dimensions are moved but incorrectly. I’m not sure concerning the sort of settings that influence them to behave like this.
View 5 Replies
View Related
Nov 7, 2013
I've been working on 3D models and noticed when i take a circle and extrude it along a path (usually a spline) it adds a lot to a file size. The objects are used as electrical conductors on power poles. After a few city blocks of this the model file size becomes basically unusable.
So my question is why does extruding a circle along a curved path increase the file size so drastically and is there another alternative to keep the file size down?
View 6 Replies
View Related
Jun 22, 2011
When i copy an artboard, sometimes the objects on both the original and the duplicate artboard have slightly moved. See sreenshots below what i mean (you have to look closely).
The right artboard was copied to the left by alt-dragging the artboard. This happens to me a lot, but not all the time, i can't really predict when it happens... At first i thought it came by an accidental mouse click or something, but the strange thing is that after the copy the objects slightly moved on both artboards.
View 13 Replies
View Related
Jun 1, 2012
I don't understand why the right click - open drawing command had to be put in a submenu. Is there a way to customize the commands on these right click menus other than the marking menu? I don't really like the marking menu, and I don't want to put it there. There was nothing wrong with where it was... There are so many commands in the basic right click menu that a good majority of inventor users don't use. At least give us the ability to customize this.
View 9 Replies
View Related
May 2, 2013
When copying a symbol (control c) then pasting (control v) I can move the symbol to another location and left click to drop it. Many times when I do this the symbol disappears and you can't see it. If I re (regen) the the entire model disappears. I can close out the drawing then open it back up the drawing has been restored and the symbol will be at the location that I had placed it at. With the same drawing, I don't have these problems with 2012.
View 1 Replies
View Related
Feb 3, 2012
When editing block in-place, not onely objects in the block, but also other objects (just drawn normal in modelspace), is affected by the commands.
View 6 Replies
View Related
May 2, 2013
A user is having problems when using the copy command in AutoCAD 2013.
When they select objects, its not reporting on the commandline how many objects its found or keeping a running total of objects selected. Not even any duplications...
I've tested it on my machine but i cannot replicate the issue and have never come across this before!
Is it a bug? Is it a variable? User setting etc.
View 9 Replies
View Related
Jul 30, 2010
Recently upgraded to LR3. When moving a number of files from one folder to another, about every third time, it moves all but one file and I get this message about the unmoved file. If I then try to move just that one remaining file, it moves it fine.
View 3 Replies
View Related
Mar 26, 2013
I moved a folder in Lightroom in the file pane, in Library mode and now Lightroom thinks they are missing. I looked for them in Finder and they aren't were they were and they aren't where I moved them too. I can't figure out how they just disappeared into the ether. The pictures are on a network drive, but I've done this before and Lightroom had no problems whatsoever.
View 2 Replies
View Related
Aug 18, 2013
I have a Canon 6D and recently purchased Lightroom 4.4 so that I could open my Canon RAW files. They do open in Lightroom, but when I move them to PHotoshop CS4 I can't open the files. I get a message telling me I can't open them.
View 6 Replies
View Related
Jan 2, 2014
I have my pictures on an external HD, formatted to Windows (XP). On my WIN7 computer, I've imported the pictures from the ext HD, into LR5. But I can't delete a bad picture, only remove from catalog. When I try to delete, I get this message : "the file could not be moved to resycle bin". If I go to the folder in Windows I have no problem deleting the file.I Should mention, that a Macbook Air have been reading files from this ext HDD.
View 6 Replies
View Related
Nov 8, 2013
I get an error code "file could not be moved to selected location" when trying to move an image or a folder from one hard drive to another within Lightroom.
I am migrating from a Windows-based PC to an iMac. I successfully used Lightroom to move all my images and catalogs from the PC hard file to a USB attached hard file. I was able to go to the iMac and move the Lightroom Catalog from USB attached drive to the Apple Macintosh drive. I was able to bring up Lightroom with moved Lightroom Catalog and work with all of my images. Then using Lightroom I was unable to move the images to the Macintosh hard drive without getting the error code above.
View 4 Replies
View Related
Jul 10, 2013
I am an AutoCAD 2011 user and have been experiancing (along with my coworkers) a strange problem when I reopen random DWG files.
When certain files open, we are getting extra text placed on top of certain drawing dimensions, it seems to be restricted to only diameter symbols (see attached 1)
Also, text is being mashed together where we typically place drawing notes (see attached 2)., since we go in and delete the gibberish, but it still pops up randomly from time to time.
View 7 Replies
View Related
Oct 28, 2013
I am using Autocad 2014 Architecture and have a 3D drawing with approximately 70 surfaces. If I close the drawing and reopen it 10 to 15 of the surfaces has disappeared. What this could be?
View 9 Replies
View Related
Jan 12, 2013
I'm using CS6. For example I change the image size to a 4X6 and then save it. Then when I open the file it will be 7.5X5. What's the fix?
View 5 Replies
View Related
Sep 25, 2013
I created some sample pie charts for a client - had no problems with the document while it was open. It saved fine, I even saved it as an EPS. However, when I try to reopen the document, it gives me an error (whether I open the illustrator or eps file).
I haven't been able to track down the reason for it. It has 6 sample pie charts on it. The text and labels are simply text or lines drawn on a separate layer. The "hole" is simply a white circle on top of the chart. There isn't really anything complicated with it, so I'm not sure where the error is. I've already recreated this but had the same problem again.
This does not happen for all pie charts - there is another file I created with other samples, and I've been able to reopen that. The odd thing is that even though I get the error, it seems to partially open the file - only a few of the elements show up.
View 2 Replies
View Related
Nov 9, 2013
Quitting and reopening Lightroom restores navigation.
View 1 Replies
View Related
Aug 22, 2013
I would like to know if there is any way of re-opening a smart object in Lightroom rather than the default ACR?
Occasionally when processing images I open them from Lightroom into Photoshop as a smart objects, should I wish to carry out some further RAW processing on one of the images it always opens in Camera RAW. I would like the image to open back into Lightroom.
View 3 Replies
View Related
May 16, 2011
In Designer Pro 6 Under Options, Backups, there's a check box that says, "Backup open documents on program close and restore on program start." Sometimes I want some of my open documents to reopen on program start (I think this is great!) But my problem is even when I first close those documents (that I don't want to open on program restart) before closing XDP6, when I reopen XDP6 the ones that I closed reopen. What can be done to change this behavior if I want to keep the box checked?
View 1 Replies
View Related
Jul 15, 2013
When I create a LIVE SHAPE in Photoshop CC edit the corners etc, close the file and then reopen at another stage, the ability to change the LIVE SHAPE properties has disappeared.
View 1 Replies
View Related
Jan 8, 2013
The firm at which I am currently consulting uses AutoCAD 2014. My system at home has P&ID. I don't use the object/3d features -- it is just the version of AutoCAD that I wound up buying. (I think it was on special or something.) In any case, some of our drawing files have become too cumbersome to use, especially on the machines at the office, and I wonder if my P&ID is the culprit. The large files appear to have AEC objects that are bogging them down, but nobody has ADT, so we are unsure from where these objects are coming. They may be coming from the client, but I wonder if they are coming from my system. Does P&ID automatically create AEC objects and, if so, is there a way to keep it from doing that?
View 2 Replies
View Related
Mar 13, 2013
I am having problems to scale 2d objects I use the command scale but when it request a base point it said "extremely small scale factor ignored" I have to do this 5 or 6 times until the command works.
The other thing is that I can not do a 1 dimension scale in 2D.
View 1 Replies
View Related
