Every time I re-open a file containing a 3D object placed in the document, if I do a minor change (texture, color or position) the 3d object jump to his imported place in the document and lost the position and direction I placed it.
View 2 RepliesI am having an issues that I am unable to change the properties of a selected object using the tools located within the ribbon. Instead I need to go through the properties popout to change them.
for instance, I seclect a line and want to change the layer from A-wall to A-door. I try to change it using the drop down layers located within the ribbon, but it does not change. however If I do the same only though the properties popout window I can change it.
Is there toggle that I accedently switched?
I would like to know if there is any way of re-opening a smart object in Lightroom rather than the default ACR?
Â
Occasionally when processing images I open them from Lightroom into Photoshop as a smart objects, should I wish to carry out some further RAW processing on one of the images it always opens in Camera RAW. I would like the image to open back into Lightroom.
I'm working with 27 artboard in illustrator for one project. I would like to select the object I need to get to in my layers panel and have illustrator "jump/navigate" me to the object where it resides on the artboard. Is this possible?
View 3 Replies View RelatedI want automate selecting an object from a place on the window to another place on the artboard in Illustrator.
View 1 Replies View RelatedI imported some Images (no background) which had the file format 'png'. I just dragged and dropped the files into my current photoshop window. They got imported and then automtically converted into smart objects.After that I created a lot of copies of these smart object and transformed them.
Â
Now I wanted to change one of the smart objects and double clicked on it. But unfortunately the opened file is a png. So it's not possible to save layers in this smart obejct
Â
Is there any way to change the file format of a smart obejct (like psb/psd)?
Was working on a small project for college yesterday and now when i try to reopen the document a good chunk of the frame i constructed yesterday is missing.
The sketches are still there though the extrusions are missing.
I do my 3D modeling by use of simple cylinders,boxes and everything looks fine. but when I re-open the file just minutes later lots of objects has moved. See attachment. The attached picture shows a highlighted cylinder that is BOTH highlighted inside the module (where it is supposed to be) and on the outside where it has moved.
This happens all the time and I have to move the objects back in position. The distance the objects are moved is random. I use 'acadiso3D' template for these models
Had a client request a schematic but for the hardware of a schematic to be represented with JPEGs of the component.Having a bizarre one where I've re-opened a DWG which had about 15 JPEGs in (which were copied from pictures off of the net) and the images aren't appearing when re-opening the file. I've just got a blank space with a boundary with drag points.
When I double click on where the image is supposed to be I got the 'Image Adjust' properties box and a space where the image is supposed to be in the box and all it says is 'Image File Unsupported.'
I'm fearing having the 'ball ache' of having to obtain the images again, and cropping them and resizing them and wasting a load of time on them which I haven't got to spear.
I've been working on this project for so long and today when i saved the 3d model, created with autocad architecture 2014,and reopened it, the walls , slabs, doors all changed into lines, but the 3d solids remained the same....i 've attached a photo what happened to my model.
Capture.jpg
I've created a series of images utilizing symbols.
Â
Basically the images are of a box. Each side of the box has different content.
Â
I create the side content flat with an encompassing rectangle. Drag all this to the Symbol Panel to create a symbol (no 9-slice no align to grid set). I then take a symbol instance and use Object > Envelope Distort > Apply with Mesh - 1 row, 1 column and proceed to transform the symbol into position on the packaging.
Â
This works.
Â
I can easily double-click the symbol and edit the side of the package with no problem. Exit symbol editing mode and the symbol instance(s) update. Perfect.
Â
Until.....
Â
I close the file. Return to it 12-18 hours later and open it to see that visually my symbols are no longer positioned correctly. I click, the symbol/emvelope is still in the correct position, but the preview on screen shows no transformation. This incorrect visual appearnce translates to print and save for web as well. So it's more than simply an inaccurate preview. The symbol has actually broken out of its container incorrectly.
Â
To explain further.
Â
When I save the file it looks like this:
Â
The grey box indicates the symbol/envelope bounding area.
Â
When I reopen the file the next day it looks like this:
The symbol/envelope is still in the correct position but the symbol contents are completely incorrect. There seems no way to reset the symbol other than to delete what's there and redo the transformations.
Â
There is nothing overly complicated about the artwork within the symbol. It's all text or line art, no effects or transformations within the symbol itself.
I recently upgraded from LT2013 to LT2014. I never had any issues with 2013, but now seem to be battling with 2014. My OS is Windows 7 Home edition.
When selecting an object and then clicking the properties menu, the properties of the selected object are not displayed, but instead the properties of the selected layer are shown.
In the attached screenshot:
1) My active layer is "AM_VIEWS".
2) The layer of the object that is selected is "MEDIUM".
3) The properties dialog box shows the properties of my active layer and not the selected object.
I am therefore unable to override any settings of the selected object and manually change settings e.g. Linetype, Linetype scale etc.
I wondered if there is a way of changing view reference from one object to another.
Example.
I have two similar models but drawing done for one.
I could save it as with a different name and replace in all the views referenciing from old model to new one.
Possible?Â
Is it possible to select an object for reading in an XRef?
PS I think it has something to do with Editor.SelectNestedEntity() but it is the end of a long day and I can't fathom it out
Occassionally the object properties in my object manager will dissappear and I am unable to bring them back. I have tried toggling all the buttons on the manager, restarting corel, resetting corel to it's default settings and restarting my computer but nothing will bring back the properties. It does not happen on every single file but it happens often enough to be a pain. I have attached a picture of what the object manager looks like.
View 6 Replies View RelatedI'm not sure what I did to make this happen or how to change it back, but for some reason when I change the size of an object/line it changes the stroke weight as well. (For example, if I drew an ellipse with stroke weight 2 pt, and then increased the size the stroke weight would be 2.856 pt or some such number instead of 2 pt.) How to change this back?
View 3 Replies View RelatedMy RAW files look great in bridge, but when I open or save them, they are somehow changing properties. The exposure increase and they become blown out and more yellow? This just started out of the blue yesterday.Â
View 16 Replies View RelatedI'm having a strange reoccurring issue with 3D items in CS6. Lately, it's been involving 3D postcards. Whenever I merge them with another 3D layer, hide then unhide them, they reappear in a completely different position and get "stuck". When I try to move or scale them, they snap back to the previous location.
View 6 Replies View RelatedI need a way for Photoshop to place an object like Illustrator does. Sure, Smart Objects are nice but I need a method where I have a PS file and 1 or more layers in it are referenced. When these references are updated the PS file should update automatically (yes, I will have to have the file open and save ...). Illustrator does this ... page layout apps do this. I need for PS to do this or find a work method that will help do this. Any thoughts? The specific details:We have several hundred images of our app's interface. The images are composites of generic interface and language-specific interface. To make things easier when updating or translating docs we snag the local parts of the interface.We would then place and align the separate images in FrameMaker. We're moving to a new tool and output and we need to put all of the images together in a single image file but want to retain the ability to only update the localized sections. Smart Objects are not smart when trying to do this as they require you to either (essentially) re-import the object (using Replace) or edit the object from the composite image. This obviates the ability to simply replace the target image and have the composite update. So ...
View 1 Replies View RelatedOn Photoshop CS4 - I want to place a 2d image onto a curved 3d object so that the object rotates with the picture curved right onto it. How do you achieve this?Â
View 4 Replies View RelatedThis is my original drawing in Photoshop CS5 for Windows:My goal is to quickly center two objects while keeping one of them (blue rectangle in my example) in place:
Â
If I follow the standard procedure (select both objects, align vertical and horizontal centers), both objects are moved to the center of the drawing:So the blue square has lost it's original position which is not good.
I am trying to place/ import a .psd as a smart object into a composite and have Photoshop keep referenceing that same psd witout it creating a local tmp file.
View 2 Replies View RelatedIt is my understanding that in Photoshop Elements I am able to place a circle around a moving object or person and have that circle stay with/track the moving object or person as the video plays? Is this correct??
View 1 Replies View RelatedBeing a transplant from AutoCAD I am used to using ctrl+1 to change the properties of selected objects. How is this done in 3DS? I would like to change depth of the cylinders...
View 1 Replies View RelatedCan you edit a block in place (refedit) without changing globally and without exploding within that drawing?
View 6 Replies View RelatedI am trying to open a video to edit within Photoshop CS6 x64. I am getting the following message:-
Â
Could not place the document ‘IMG_1664.MOV’ because no parser or file format can open the file.
Â
The video was shot on my iphone 4S and ive even tried converting to other formats yet Photoshop still gives the same error. I have checked through Bridge and I have no option to send to Photoshop on the right click menu. try out the new features of CS6 for video editing.
Â
I am running a 27" iMac with 12gb RAM and 1gb of Video RAM.
Getting this error when trying to use downloaded ACTIONS. "Could not place the document ‘Photoshop_Actions_03_by_ReehBR.atn’ because no parser or file format can open the file."
View 2 Replies View RelatedI want to change some layer properties that are the same on about 100 different drawing files. Is there a way to do this once and have the change reflected every time I open one of the 100 drawings?
View 9 Replies View RelatedI have a title block saved in my template file, and also as a block in the design centre. The variable fields within the title block are in Arial font. If I open each title block and fill them in I have no problem. If I take the shortcut of filling in one and copy and paste from one sheet into the next sheet, the text properties change back to standard.
View 2 Replies View RelatedIs it possible to change the properties of the dashed line? Specifically the dash length and space between dashes?
View 2 Replies View RelatedWhen I from Photoshop CS6 chose to open a file, or "Place" the browser window open, but I have to scroll all the way down in the "Enable:" drop down menu to chose "All Documents" or "All readable Documents" each time. And then if I want chose from the "Format" menu.
Â
This is very time consuming, and I don't find any settings to make i.e. "All Documents" as default.