AutoCAD 2013 :: Crash In Open Command?
Jan 10, 2013
I am having a problem with AutoCad 2013 crashing. While running the program when I use the open command dialog box if I re-name a file, create a folder, or copy a file autocad goes unresponsive and crashes immediately afterward. I have installed the service pack and update my video card driver trying to fix the problem. I used to be able to perform everything mentioned above in AutoCad 2010 without any problems. I don't think its my computer causing the problem because everyone else in my office is having the same issue with 2013.
View 5 Replies
ADVERTISEMENT
Nov 19, 2013
A colleague was working on a drawing yesterday in AutoCAD 2013 when it crashed. Since then the drawing has refused to open in AutoCAD 2013. It also does not open Trueview. It will however open in previous version of AutoCAD. We tried to export it to .dxf as well but they are corrupt. We also tried to attach it to a new drawing as an Xref and as a block, both were met with an instant fatal error and the closure of AutoCAD.
We have tried auditing, purging, resaving, using backs-ups. None of them will open in AutoCAD 2013 any more. The drawing closes without attempting to open with no error messages. It just loads up the default drawing(x).dwg.
View 9 Replies
View Related
Oct 1, 2013
I am running Autocad 2014 on a Windows 7 machine. Everytime a use the open command Autocad appears to freeze. I can clear the freeze by hitting the escape key. The only way I can open drawing files is to use windows explorer and click on the file I want to open.
View 7 Replies
View Related
Feb 25, 2013
I'm trying to find out how to assign to a toolbar button the open command for a specific drawing.
The code I input at the cui is ^C^COPEN;"//server/subpath1/subpath2/legend.DWG";
The answer I get is
Command: OPEN
Command: //server/subpath1/subpath2/legend.DWG "
Unknown command "DWG"". Press F1 for help.
View 9 Replies
View Related
Jun 1, 2012
I don't understand why the right click - open drawing command had to be put in a submenu. Is there a way to customize the commands on these right click menus other than the marking menu? I don't really like the marking menu, and I don't want to put it there. There was nothing wrong with where it was... There are so many commands in the basic right click menu that a good majority of inventor users don't use. At least give us the ability to customize this.
View 9 Replies
View Related
May 1, 2012
[URL] ......
Floating command line width gets shorter and shorter everytime you open up AutoCAD? Civil 3D is real bad, I used it to shoot the above video. In regular AutoCAD, it still shrinks, but it shrinks a lot less.
Any tips for keeping it floating but making the width stay constant?
View 7 Replies
View Related
May 23, 2012
This happens with a number of drawings, I believe all the files are very large approximately 8mb+. The issue is that by using the REGEN or the Zoom - Dynamic command, it will freeze AutoCAD. I will have to conduct a force shutdown than restart the program.
My question is; where do I start to determine what is the cause? Where do I find an error log?
View 1 Replies
View Related
Jul 20, 2012
We have loaded copies of AutoCAD Architecture 2013 on several workstations. We had tried brining over older profiles (from 2008)- which did not work, so made up new ones. ANYTIME we go into the profile settings to load a different profile beyond the default, AutoCAD Architecture (US Imperial), eventually while working the program will crash. We've wiped out installations of the program, registry and all, and re-installed without brining over any prior data. Same issue.
Even when using a seperate "default" profile us as (Global) or (Metric)- same issues. The problem with staying/modifying the workspace for the US Imperial is it will not load the complete menus with the MENULOAD command (only loads EXPRESS). If we work within the (US Imperial), no crashing, but again, the menus are not available within that profile for some reason, so that is not an acceptable solution.
View 5 Replies
View Related
Aug 29, 2012
Autocad 2013 x64 and DWG TrueView 2013 x64 crash when print on HP LaserJet 5200 (A3)
APPCRASH
acad.exe
25.0.55.0
4f309adb
StackHash_c855
6.1.7601.17725
View 2 Replies
View Related
Jan 4, 2014
After installing the VBA Module, I get the message "Unknown command "VBARUN"". I've rebooted, restarted and tried reinstalling the VBA Module to no avail.
View 4 Replies
View Related
May 15, 2012
I press CTRL+9 to make the Command Line disappear while drawing. When I plot (or when doing a plot preview) , the Command Line appears again by itself. So I always have to turn the Command Line off manually after each plot
The bug still happens;
- if Dynamic Input is turned off or on
- if I plot to a real device or in PDF
- if the Cammand Line Palette i docked or floating.
This is not an issue in AutoCAD 2012 so I guess it has to do with the new way they programmed the revamped Command Line palette in 2013.
Using Windows7
View 2 Replies
View Related
Jan 7, 2014
My girlfriend has a problem with AutoCad 2013 students version. After attaching pdf file in underlay option AutoCad crash. She's got macbook air with system version OS 10.9. She had not ever problems with pdr iunderlay before.
View 1 Replies
View Related
Aug 20, 2012
We have just loaded the following the this order, AutoCAD2013, Revit MEP then Navis Simulate. All 2013. Everything works, including the NWC export from Revit MEP and the export from AutoCAD.The problem is that when you submit the NWNAVIGATOR command, Autocad thinks about it and then crashes out of AutoCAD. We have switched off the Hardward drivers.
View 4 Replies
View Related
May 22, 2013
I need to re-install my ACAD 2013. I get to the Product License Activation Options and have the activation code when I first installed. This time it dont work. I bet it something to do with multiple install. Error code is: 0015.11.
View 2 Replies
View Related
Jul 6, 2012
AutoCAD MEP 2013. Having a repeated crash when creating a 2D section view. Works great up until I place the 2D section and then crashes. I have tried using sections from Electrical and Arch palletes but same thing. I've used this tool thousands of times on other versions but this is the first time with 2013.
View 2 Replies
View Related
Jul 31, 2012
I am using Windows 7 64 bit laptop. When I close a drawing just after saving in AutoCAD 2013 64 bit, the program crashes. This will happen with one drawing open, or several. I also had this problem with 2011.
I have been using AutoCAD for 16 years and never had this problem with previous versions on earlier operating systems.
View 9 Replies
View Related
Sep 14, 2012
I've been crashing (fatal error, unhandled access violation) a LOT lately, and it happens when I'm changing between tabs - both between layout tabs and from layout to model. I have a brand new computer and a recent install of AutoCAD, which I also ran the repair routine on recently to try to fix the crashing issue. This happened with my old computer as well, and our IT people thought maybe it was too old to handle AC 2013 (old one was about 7 years old), so now I'm running an HP Compaq Elite 8300, Win 7 OS, with an Intel i5-3470 CPU at 3.2 GHz, 8 GB of RAM, and an NVIDIA NVS 300 graphics card. And it still crashes.
I'm using files that were created on my old CAD station, which ran AutoCAD 2008 LT, and it started crashing on me - I suppose it's possible that one or more of those files got corrupted and that's what's causing this.It's crashed three times in the last three days, and probably a total of 10 - 15 times since my new computer came in late last month, and I'm getting pretty tired of it.
View 9 Replies
View Related
Jun 6, 2012
After upgrading/switching my stand alone license from Civil 3D 2011 to Map 3D 2013, my computer is crashing before a complete opening of some larger dwgs (1575 KB). Sometimes I get an Out of Memory message.Other (much smaller) drawings open fine.The switch from Civil to Map was made because we were not using any of the civil bells and whistles that make it unique.
Map suits our needs. We use shp files (data connect) to generate most of our work.I can use another computer in our office that has Map 3D 2011 and am able to open up any of the drawings with no problems. Because I had no issues with Map 3D 2011, I thought moving up to 2013 would be "easy".
We have a subscription and every couple of years try to load up the latest and learn to live with it.Now I am wondering if we can all just go to Map 2011 and forget 2013.
View 6 Replies
View Related
May 17, 2013
The big problem is that when am doing whatever work, the program stop working and show a error message, that says: ERROR FATAL: Unhandled access violation writing 0x000 exception at 70601612h
[URL]
And it happens when i'm on any kind of views or after printing..
My Pc is an: Intel Core i3-2100 CPU @ 3.10GHz
4gb Ram
Windows 7 ultimate x64 bits
I DON'T HAVE AN VIDEO CARD. I use the one that provide the Motherboard.. Thats Intel HD Graphic 2000
View 1 Replies
View Related
Jan 11, 2013
getting consistent crash when clicking on "new" in page setup manager dialog box.
Happens regardless of which drawing is open. Even for new blank drawings.This prevents me from creating new pagesetup overrides for Publishing. MAJOR PROBLEM.
At this point I have to get other people in the office to create new page setup for me. Editing existing page setups works find, only the "new" setups are a problem.
AutoCAD 2013 (G.114.0.0 SP 1.1), Windows 7.
Also, AutoCAD internal crash reporter is not called. Goes direct to Win 7, "Application has stop working" dialog.
View 4 Replies
View Related
Oct 12, 2012
We just upgraded to 2013 software and anytime i change the ribbon to anything besides the default Inventor crashes.
View 9 Replies
View Related
Sep 19, 2013
We use 2012 primarily, and I finally installed 2014 on 2 different machines. Both work ok until I load the 2012 profiles. Then, AutoCAD wont even start after you close and re-open. We use a lot of custom lisps and menus that i need loaded into 2014.
View 3 Replies
View Related
Nov 12, 2012
I have no this problem for version before Inventor 2013, just start from this lates version.
I models a ballet bar assy in 2'6" width with derived sketch, then I used DA to copy all the files with new name in 4'. After that, I tried to open the new files, it crashed itself, no matter I open a part or assemble.
But if I changed the derived sketch name back to its original, everything is fine for new files.
I attahced the zip file, try it. If it crashes, just change file: BALLET BAR 4ft_SKETCH
to: BALLET BAR 2ft-6in_SKETCH
everything is fine then.
View 6 Replies
View Related
Oct 24, 2013
We have our AutoCAD2013 freezing for at least 4 times a day, on all 5 Computers.
I want to do that Customer Error Reporting thing, but no Window appears after the Crash, and I haven`t found it in the options yet.
The Computers are 3 x Fujitsu Esprimo P900 with an additional Graphic Card.
Intel Core i3, 3.3 GHz and 6 to 8 GB Ram.
2x is Windows 7 64bit and one is 32bit with 4GB RAM.
And the other two are Fujitsu Celsius M470 with 3.46GHz and 8GB RAM. NVIDIA Quadro 6000.
All Patches and Updates of AutoCAD2013 are installed. Why it crashes, why the CER doesn't appear?!
View 9 Replies
View Related
Jul 10, 2013
I recently gave my windows a factory restore (fresh start windows original copy), I had no issues with autodesk software before the windows fresh start (i use Revit and 3Dmax too), i even installed and used Autocad 2014 on my laptop before the restore and it ran just fine, problem is now after the windows restore Autocad crashes everytime i open it, installation was smooth and succesfull with no error warninings whatsoever; the problem comes when i start Autocad 2014 for the first time, the initialization window opens and starts loading the files but then (everytime) crashes and freezes my laptop forever, not even the task manager is posible to open
My Specs:
Laptop: Alienware M14x R2
Processor: intel i-7 @2.30 ghz
16 gb RAM
Graphics: Nvidia GeForce 650M 2GB
running on Windows 7 64-bit
after the restore i downloaded the latest drivers for my graphics card, so that shouldnt be the issue, i also switched the processing tu GPU only.
i already tried lots of solutions i saw on other posts, but none seems to suit my need, i tried the .NET framework thing, switching off the windows Aero theme, but the problem remains the same, it still freezes completely my laptop everytime i try to run Autocad 2014, i even tried installing Autocad 2013, Autocad 2011 and Revit 2014 but the issue is the same in all of them they freeze at startup without any pop up error warnings, just freezes.
View 6 Replies
View Related
May 31, 2012
Getting an "AutoCAD stopped working" message then system crash while working in AutoCAD Civil 3D 2013.
View 2 Replies
View Related
Aug 28, 2013
I want to know if it is possible to creat a script that will rotate the cam wheel show at the pivot point, while causing the rectangle to oscillate up and down in cadence with the ppoint of the whell that is contacting it.
I have a simple script that rotates the cam wheel, but every time I run it, AC crashes. I am on Windows 7 Ultimate 64bit and I have installed the latest service pack. Here is the script:
rotate
g
1
45.5447,44.7299
1
rscript
I'm not sure what other information you may need to diagnose this, so just let me know. There is no error message given, it just freezes up.
View 3 Replies
View Related
Dec 5, 2012
We have a big problem on several PC's with Acad Map 3D
if the users import their old (Acad 2010 Map 3D) files where symbollists and view settings are stored.
After a restart of Acad it hangs up with following Errors (See attached).
We can solve this issue temporary with restoring the defaults.
So the problem is importing old files so i think it is not campatible with this old acad 2010 files.
Is there a way to import such old files?
View 8 Replies
View Related
Feb 22, 2013
Some times it happens that when I make an orbit to a 3d model it seems that Autocad could not process it and it shoots down with a fatal error message. This is occuring quite often. why is this?
View 4 Replies
View Related
Jun 26, 2012
Fatal error occurred when invoking 'Send Feedback'.
However, the appropriate website does open after AutoCAD crash.
View 1 Replies
View Related
May 15, 2013
I'm having an issue with Inventor crashing every time I attempt to follow this exact procedure:
1. I have a drawing open with an iAssembly or iPart in it.
2. I edit a view by double-clicking the view, opening the 'Drawing View' dialog box.
3. I open the 'Model State' tab.
4. In the 'iAssembly/iPart Member' menu box, I select a different member.
Now, it may or may not open the 'Save' dialog box. If it does, then I click 'OK' and poof, Inventor crashes without fail, asking to send in a crash report.
The same thing happens if I start a brand new drawing and attempt to follow the same procedure while inserting a Base view.
Now, I know for a fact that the not all of the drivers are not up to date on my computer, I am not using a recommended graphics card, and I am using SP1.1, not SP2. I have notified my IT guy about this, but he has yet to get back to me. I don't now if/when everything on my computer will be updated. I do not have admin rights to my computer.
In the mean time, Inventor has become essentially useless for me until this issue has been resolved. how I can get these drawings to start working?
View 3 Replies
View Related
